[PATCH v1] net: dsa: wait until PHY aneg is done

[Sascha Hauer]

On Wed, Apr 27, 2022 at 09:33:40AM +0200, Oleksij Rempel wrote:
> Some PHYs need a bit longer to complete auto negotiation. So, wait long
> enough until this process is done.
> 
> Signed-off-by: Oleksij Rempel <o.rempel at pengutronix.de>
> ---
>  drivers/net/dsa.c | 4 ++++
>  1 file changed, 4 insertions(+)

Applied, thanks

Sascha


> 
> diff --git a/drivers/net/dsa.c b/drivers/net/dsa.c
> index f2420d306f..d9e629cefc 100644
> --- a/drivers/net/dsa.c
> +++ b/drivers/net/dsa.c
> @@ -111,6 +111,10 @@ static int dsa_port_start(struct eth_device *edev)
>  
>  	dsa_port_set_ethaddr(edev);
>  
> +	ret = phy_wait_aneg_done(dp->edev.phydev);
> +	if (ret)
> +		return ret;
> +
>  	if (ops->port_enable) {
>  		ret = ops->port_enable(dp, dp->index, dp->edev.phydev);
>  		if (ret)
> -- 
> 2.30.2
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |