January 2008 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Tue Jan 1 10:44:29 PST 2008
Ending: Thu Jan 31 21:31:17 PST 2008
Messages: 258

• Acct-Input-Octets & Acct-Output-Octets missing in radius accounting packets   Laurent CADET
• wpa_gui-qt4 status   Kel Modderman
• [PATCH]: Use QCombobox::addItem to append items to combo box lists.   Kel Modderman
• [PATCH]: Use QCombobox::addItem to append items to combo box lists.   Jouni Malinen
• hostapd/wpa_supplicant - new development release v0.6.2   Jouni Malinen
• How to archive a hostapd release in git repository   Yen-Jung Chang
• wpa_supplicant service fails to autostart on Fedora 8   Robert Allerstorfer
• Git clone issue   Mohammed Riyaz
• Git clone issue   Johannes Berg
• Git clone issue   Mohammed Riyaz
• wpa supplicant 0.6.1 - problem   Raghavendra. S
• wpa supplicant 0.6.1 - problem   Raghavendra. S
• Git clone issue   Jouni Malinen
• Git clone issue   Mohammed Riyaz
• packet flow with hostap   Mohammed Riyaz
• How to archive a hostapd release in git repository   Yen-Jung Chang
• Git clone issue   Johannes Berg
• Git clone issue   Mohammed Riyaz
• wpa_supplicant service fails to autostart on Fedora 8   Dan Williams
• [PATCH] honor explicit scan requests when disconnected   Dan Williams
• [PATCH] fix setting transmit key index with older orinoco/prism54 drivers   Dan Williams
• [PATCH] ignore duplicate OpenSSL client cert and private key addition   Dan Williams
• [PATCH] fix setting transmit key index with older orinoco/prism54 drivers   Dan Williams
• wpa_supplicant hangs during assosiation   Christian Kölpin
• wpa_supplicant hangs during assosiation   Dan Williams
• wpa_supplicant hangs during assosiation   Christian Kölpin
• No subject   bogus at does.not.exist.com
• wpa_supplicant hangs during assosiation   Dan Williams
• Internal TLS/crypto in wpa supplicant   Mahendra Prajapat
• Need CA, Client and Server certificates to test EAP-TLS/TTLS/PEAP   Raghavendra. S
• Need CA, Client and Server certificates to test EAP-TLS/TTLS/PEAP   Sandeep N - TLS , Chennai
• Need CA, Client and Server certificates to test EAP-TLS/TTLS/PEAP   Raghavendra. S
• EAP-TLS error   Raghavendra. S
• No subject   Raghavendra. S
• Internal TLS/crypto in wpa supplicant   Bryan Kadzban
• Internal TLS/crypto in wpa supplicant   Jouni Malinen
• Need CA, Client and Server certificates to test EAP-TLS/TTLS/PEAP   Dan Williams
• Need CA, Client and Server certificates to test EAP-TLS/TTLS/PEAP   Laurento Frittella
• Need CA, Client and Server certificates to test EAP-TLS/TTLS/PEAP   Dan Williams
• Need CA, Client and Server certificates to test EAP-TLS/TTLS/PEAP   Chr
• Need CA, Client and Server certificates to test EAP-TLS/TTLS/PEAP   Jonathan Kratter
• Internal TLS/crypto in wpa supplicant   Jouni Malinen
• w1.fi (a.k.a. hostap.epitest.fi) hard drive failure   Jouni Malinen
• [PATCH]: wpa_gui-qt4: add "Select any network" to network combobox   Kel Modderman
• Failure to build with CONFIG_EAP_IKEV2=y   Kel Modderman
• [PATCH]: append -MMD to default CFLAGS   Kel Modderman
• Internal TLS/crypto in wpa supplicant   Mahendra Prajapat
• Please help me connect to this wireless network   Shiv Jairam
• Problem in Ad-Hoc mode WPA-NONE security... need help.   Raghavendra. S
• How to clear scan cache.   Raghavendra. S
• whether ad-hoc mode supports WEP security?   Raghavendra. S
• External RADIUS Server with two different Hostapd's   Ran Holtzman
• Is it possible to know rssi?   Raghavendra. S
• Problem in Ad-Hoc mode WPA-NONE security... need help.   Dan Williams
• How to clear scan cache.   Dan Williams
• whether ad-hoc mode supports WEP security?   Dan Williams
• Is it possible to know rssi?   Dan Williams
• wpa_supplicant hangs during assosiation   Christian Kölpin
• Problem in Ad-Hoc mode WPA-NONE security... need help.   Raghavendra. S
• Failures Stop with DEBUG Enabled   Hunt, G Andrew
• How to clear scan cache.   Raghavendra. S
• External RADIUS Server with two different Hostapd's   Jouni Malinen
• How to archive a hostapd release in git repository   Jouni Malinen
• wpa_supplicant-0.6.1 IBSS Mode   Benoit PAPILLAULT
• Problem in Ad-Hoc mode WPA-NONE security... need help.   Raghavendra. S
• Control interface doubt...   Raghavendra. S
• How to clear scan cache.   Dan Williams
• How to archive a hostapd release in git repository   Yen-Jung Chang
• How to clear scan cache.   Raghavendra. S
• EAP-Success = failure?   Ryan M. Adamson
• EAP-Success = failure?   Dan Williams
• EAP-Success = failure?   Jouni Malinen
• [PATCH]: wpa_gui-qt4: add "Select any network" to network combobox   Jouni Malinen
• [PATCH]: append -MMD to default CFLAGS   Jouni Malinen
• Failure to build with CONFIG_EAP_IKEV2=y   Jouni Malinen
• [PATCH]: append -MMD to default CFLAGS   Kel Modderman
• w1.fi (a.k.a. hostap.epitest.fi) hard drive failure   Kel Modderman
• w1.fi (a.k.a. hostap.epitest.fi) hard drive failure   Dan Williams
• [PATCH] ignore duplicate OpenSSL client cert and private key addition   Dan Williams
• [PATCH] fix setting transmit key index with older orinoco/prism54 drivers   Dan Williams
• [PATCH] honor explicit scan requests when disconnected   Dan Williams
• [PATCH]: wait_for_interface poll on driver interface initialization   Kel Modderman
• [PATCH]: enable 'ENABLE_NETWORK all' ctrl_iface command   Kel Modderman
• [PATCH]: enable 'DISABLE_NETWORK all' ctrl_iface command   Kel Modderman
• [PATCH]: enable 'REMOVE_NETWORK all' ctrl_iface command   Kel Modderman
• [PATCH]: wpa_gui-qt4: use "ENABLE_NETWORK all" and "DISABLE_NETWORK all" ctrl iface commands   Kel Modderman
• Does hostapd support ipw3945 or bcm43xx ?   Leon Zhang
• Does hostapd support ipw3945 or bcm43xx ?   Johannes Berg
• [PATCH]: wpa_gui-qt4: add save configuration file menu item   Kel Modderman
• [PATCH] fix setting transmit key index with older orinoco/prism54 drivers   Jouni Malinen
• [PATCH] honor explicit scan requests when disconnected   Jouni Malinen
• [PATCH] ignore duplicate OpenSSL client cert and private key addition   Jouni Malinen
• [PATCH]: wait_for_interface poll on driver interface initialization   Jouni Malinen
• [PATCH]: enable 'ENABLE_NETWORK all' ctrl_iface command   Jouni Malinen
• [PATCH]: enable 'DISABLE_NETWORK all' ctrl_iface command   Jouni Malinen
• [PATCH]: enable 'REMOVE_NETWORK all' ctrl_iface command   Jouni Malinen
• [PATCH]: wpa_gui-qt4: use "ENABLE_NETWORK all" and "DISABLE_NETWORK all" ctrl iface commands   Jouni Malinen
• [PATCH]: wpa_gui-qt4: add save configuration file menu item   Jouni Malinen
• [PATCH]: wait_for_interface poll on driver interface initialization   Kel Modderman
• Doubt about applying patch to wpa supplicant   Raghavendra. S
• scan result doubt..   Raghavendra. S
• [PATCH]: wait_for_interface poll on driver interface initialization   Jouni Malinen
• scan result doubt..   Dan Williams
• Doubt about applying patch to wpa supplicant   Dan Williams
• Doubt about applying patch to wpa supplicant   Jouni Malinen
• Doubt about applying patch to wpa supplicant   Dan Williams
• EAP-Success = failure?   Adamson, Ryan M.
• wpa_supplicant-0.6.1 IBSS Mode   Christian Fackroth
• Doubt about applying patch to wpa supplicant   Jouni Malinen
• EAP-Success = failure?   Ryan M. Adamson
• [SPAM] wpa supplicant and scan problem.   Wang Baisheng
• wpa_supplicant on WinCE   Paresh Sawant
• Setting authentication algorithm   Dmitry Shmidt
• [SPAM] wpa supplicant and scan problem.   Dan Williams
• [PATCH] ignore duplicate OpenSSL client cert and private key addition   Dan Williams
• Doubt about applying patch to wpa supplicant   Dan Williams
• Connect to an AP based on signal strength   hce
• EAP-Success = failure?   Jouni Malinen
• unmatched ssid   hce
• WAPI standard spec   bunny shi
• WAPI standard spec   Jouni Malinen
• We can enable wpa supplicant more than one time without killing previous daemon   Raghavendra. S
• Authentication timeout with wext driver and ipw3945 card   Giuliano Pasqualotto
• Authentication timeout with wext driver and ipw3945 card   Dan Williams
• beacon stuffing   Timur Alperovich
• [PATCH] ignore duplicate OpenSSL client cert and private key addition   Dan Williams
• [PATCH] add blob support to the D-Bus control interface   Dan Williams
• If my configuration correctly correspond to the Windows GUI configuration?   Forrest Sheng Bao
• 98451 55999 / 97393 75378 - auto jagala number   Raghavendra. S
• Integrating the TPM into wpa_supplicant   Carolin Latze
• wpa_gui-qt4 status   Reik Red
• beacon code   Timur Alperovich
• beacon code   Johannes Berg
• wpa_supplicant service fails to autostart on Fedora 8   Reik Red
• beacon code   Timur Alperovich
• beacon code   Johannes Berg
• beacon code   Timur Alperovich
• beacon code   Timur Alperovich
• beacon code   Johannes Berg
• beacon code   Timur Alperovich
• beacon code   Johannes Berg
• beacon code   Timur Alperovich
• beacon code   Johannes Berg
• beacon code   Timur Alperovich
• beacon code   Johannes Berg
• beacon code   Timur Alperovich
• Is there a way to separate security code in wpa supplicant?   Raghavendra. S
• beacon code   Jouni Malinen
• Is there a way to separate security code in wpa supplicant?   Jouni Malinen
• Integrating the TPM into wpa_supplicant   Jouni Malinen
• wpa_supplicant service fails to autostart on Fedora 8   Reik Red
• wpa_supplicant service fails to autostart on Fedora 8   Dan Williams
• wpa_supplicant service fails to autostart on Fedora 8   Reik Red
• [PATCH] add blob support to the D-Bus control interface   Jouni Malinen
• Authentication timeout with wext driver and ipw3945 card   Giuliano Pasqualotto
• Operation not permitted   Shiv Jairam
• Does hostapd support ipw3945 or bcm43xx ?   Leon Zhang
• Operation not permitted   Forrest Sheng Bao
• When will hostap driver support QOS frame?   Eltony Li
• When will hostap driver support QOS frame?   Jouni Malinen
• wpa_supplicant in daemon mode with out any interface details   Sukku
• [PATCH]: wpa_gui-qt4: use QCloseEvent handler to close children dialogs   Kel Modderman
• [0.6.x PATCH] SIGUSR1 changes debug level   Kel Modderman
• Operation not permitted   Shiv Jairam
• [0.6.x PATCH] SIGUSR1 changes debug level   Jouni Malinen
• [PATCH]: wpa_gui-qt4: use QCloseEvent handler to close children dialogs   Jouni Malinen
• Integrating the TPM into wpa_supplicant   Carolin Latze
• hostapd Proxy-State AVP   Saber Zrelli
• wpa_supplicant in daemon mode with out any interface details   Chuck Tuffli
• beacon code   Timur Alperovich
• beacon code   Timur Alperovich
• wpa_gui-qt4 ui forms and qt4-designer   Kel Modderman
• wpa_gui-qt4 ui forms and qt4-designer   Jouni Malinen
• [PATCH 1/8]: wpa_gui-qt4: convert networkconfig.ui to qt4-designer layout   Kel Modderman
• [PATCH 2/8]: wpa_gui-qt4: use descriptive label names in networkconfig.ui   Kel Modderman
• [PATCH 3/8]: wpa_gui-qt4: change tab stop order of WEP widgets   Kel Modderman
• [PATCH 4/8]: wpa_gui-qt4: add "Optional Settings" box with priority spin box   Kel Modderman
• [PATCH 5/8]: wpa_gui-qt4: move id_str handling and add support for get/set priority   Kel Modderman
• [PATCH 6/8]: wpa_gui-qt4: check id_str is a single string of word characters   Kel Modderman
• [PATCH 7/8]: wpa_gui-qt4: give nicer title to WPA-PSK warning   Kel Modderman
• [PATCH 8/8]: wpa_gui-qt4: focus on input fields that cause warning on network add   Kel Modderman
• get_network requests yield poor informatoin for preseeding networkconfig form   Kel Modderman
• Integrating the TPM into wpa_supplicant   Carolin Latze
• hostapd-0.6.x link error   Christian Fackroth
• [PATCH 1/8]: wpa_gui-qt4: convert networkconfig.ui to qt4-designer layout   Jouni Malinen
• hostapd Proxy-State AVP   Jouni Malinen
• network interface information through ioctlsHi all, I need to find the network interfaces which are present in the system. after finding that list I need to discriminate whether that interface is wire or wireless, and I need to find which device driv   Sukku
• network interface information through ioctlsHi all, I need to find the network interfaces which are present in the system. after finding that list I need to discriminate whether that interface is wire or wireless, and I need to find which device driv   Dan Williams
• Integrating the TPM into wpa_supplicant   Carolin Latze
• [PATCH 1/3]: wpa_gui-qt4: refresh wpagui.ui with qt4-designer   Kel Modderman
• [PATCH 2/3]: wpa_gui-qt4: new layout for wpagui main network selection form   Kel Modderman
• [PATCH 3/3]: wpa_gui-qt4: wpagui backend changes to adapt to new form layout   Kel Modderman
• GENERIC_ELEMENT bug?   Timur Alperovich
• hostapd-0.6.x link error   Christian Fackroth
• [PATCH 1/3]: wpa_gui-qt4: move new select any button   Kel Modderman
• [PATCH 2/3]: wpa_gui-qt4: rename connect button to reassociate   Kel Modderman
• [PATCH 3/3]: wpa_gui-qt4: change scan button label   Kel Modderman
• hostapd-0.6.x link error   Jouni Malinen
• wpa_supplicant in daemon mode with out any interface details   Jouni Malinen
• get_network requests yield poor informatoin for preseeding networkconfig form   Jouni Malinen
• [PATCH 1/3]: wpa_gui-qt4: refresh wpagui.ui with qt4-designer   Jouni Malinen
• [PATCH 2/3]: wpa_gui-qt4: new layout for wpagui main network selection form   Jouni Malinen
• [PATCH 2/3]: wpa_gui-qt4: rename connect button to reassociate   Jouni Malinen
• [PATCH 3/3]: wpa_gui-qt4: change scan button label   Jouni Malinen
• [PATCH 1/3]: wpa_gui-qt4: refresh wpagui.ui with qt4-designer   Kel Modderman
• get_network requests yield poor informatoin for preseeding networkconfig form   Kel Modderman
• [PATCH 2/3]: wpa_gui-qt4: new layout for wpagui main network selection form   Kel Modderman
• problem about WPS proxy function?   leeliu
• prism_srec PDA file question   Alexander Mahr
• USB devices, master mode   Antoine Junod
• USB devices, master mode   Timur Alperovich
• USB devices, master mode   Antoine Junod
• [PATCH 1/14]: wpa_gui-qt4: restructure top menu items   Kel Modderman
• [PATCH 2/14]: wpa_gui-qt4: tabbed interface for current status and network management   Kel Modderman
• [PATCH 3/14]: wpa_gui-qt4: populate network listbox on Manage Network tab   Kel Modderman
• [PATCH 4/14]: wpa_gui-qt4: connect new Add pushbutton to signal/slot pair   Kel Modderman
• [PATCH 5/14]: wpa_gui-qt4: connect new Edit pushbutton to signal/slot pair   Kel Modderman
• [PATCH 6/14]: wpa_gui-qt4: connect new Remove pushbutton to signal/slot pair   Kel Modderman
• [PATCH 7/14]: wpa_gui-qt4: connect Enabled/Disabled radio buttons to signal/slot pairs   Kel Modderman
• [PATCH 8/14]: wpa_gui-qt4: connect new Scan pushbutton to signal/slot pair   Kel Modderman
• [PATCH 9/14]: wpa_gui-qt4: double click signal on network listbox spawns edit dialog   Kel Modderman
• [PATCH 10/14]: wpa_gui-qt4: add Remove and Remove All menu entries to Network menu   Kel Modderman
• [PATCH 11/14]: wpa_gui-qt4: allow {enable, disable, remove}Network() to accept special string "all"   Kel Modderman
• [PATCH 12/14]: wpa_gui-qt4: trigger update of network lists on disable, enable and remove network events   Kel Modderman
• [PATCH 13/14]: wpa_gui-qt4: consistent network index selection during update of network list   Kel Modderman
• [PATCH 14/14]: wpa_gui-qt4: show message when attempting to remove/edit network from empty list   Kel Modderman
• Different root CA for wpa_supplicant and freeradius   Carolin Latze
• Different root CA for wpa_supplicant and freeradius   Carolin Latze
• Different root CA for wpa_supplicant and freeradius   Alan DeKok
• problem about WPS proxy function?   leeliu
• Different root CA for wpa_supplicant and freeradius   Jouni Malinen
• Different root CA for wpa_supplicant and freeradius   Jouni Malinen
• [PATCH 1/14]: wpa_gui-qt4: restructure top menu items   Jouni Malinen
• [PATCH]: wpa_gui-qt4: scroll to bottom of event history viewer for every new event   Kel Modderman
• [PATCH]: wpa_gui-qt4: activate wep input fields when processing network info from scan results   Kel Modderman
• Different root CA for wpa_supplicant and freeradius   Carolin Latze
• Different root CA for wpa_supplicant and freeradius   Carolin Latze
• [PATCH 1/3]: add flags output to new bss ctrl interface command reply   Kel Modderman
• [PATCH 2/3]: wpa_gui-qt4: update scan results on WPA_EVENT_SCAN_RESULTS   Kel Modderman
• [PATCH 3/3]: wpa_gui-qt4: use bss ctrl interface command to get scan results   Kel Modderman
• Bugzilla is down?   Ray Overland
• [PATCH]: wpa_gui-qt4: correct check of pos value returned from indexOf()   Kel Modderman
• [PATCH]: wpa_gui-qt4: scroll to bottom of event history viewer for every new event   Jouni Malinen
• [PATCH]: wpa_gui-qt4: activate wep input fields when processing network info from scan results   Jouni Malinen
• [PATCH 1/3]: add flags output to new bss ctrl interface command reply   Jouni Malinen
• [PATCH 2/3]: wpa_gui-qt4: update scan results on WPA_EVENT_SCAN_RESULTS   Jouni Malinen
• [PATCH 3/3]: wpa_gui-qt4: use bss ctrl interface command to get scan results   Jouni Malinen
• [PATCH]: wpa_gui-qt4: correct check of pos value returned from indexOf()   Jouni Malinen
• Bugzilla is down?   Jouni Malinen
• Can any body give me working test certificates to test EAP-TLS?   Raghavendra. S
• Segmentation Fault when using external RADIUS server   Ray Overland
• Segmentation Fault when using external RADIUS server   Jouni Malinen
• [PATCH]: wpa_gui-qt4: scroll to bottom of event history viewer for every new event   Kel Modderman
• [PATCH 3/3]: wpa_gui-qt4: use bss ctrl interface command to get scan results   Kel Modderman
• [PATCH 1/2]: add "count" argument to bss ctrl interface command   Kel Modderman
• [PATCH 1/2]: wpa_gui-qt4: get bssid count before iterating through scan results   Kel Modderman
• [PATCH]: wpa_gui-qt4: remove QTimer remains from scanresults.h   Kel Modderman
• [PATCH 1/2]: wpa_gui-qt4: get bssid count before iterating through scan results   Kel Modderman

Last message date: Thu Jan 31 21:31:17 PST 2008
Archived on: Fri Oct 23 03:18:38 PDT 2015

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...