May 2012 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Tue May 1 05:25:59 EDT 2012
Ending: Thu May 31 16:08:34 EDT 2012
Messages: 515

• [ANNOUNCE] Meet the penguins at the LinuxTag 2012 in Berlin   Juergen Beisert
• [BUG: barebox-git] failure at common/block.c:248/block_put()!   Roberto Nibali
• [BUG: barebox-git] failure at common/block.c:248/block_put()!   Sascha Hauer
• [BUG: barebox-git] failure at common/block.c:248/block_put()!   Roberto Nibali
• [BUG: barebox-git] failure at common/block.c:248/block_put()!   Roberto Nibali
• [BUG: barebox-git] failure at common/block.c:248/block_put()!   Roberto Nibali
• [BUG: barebox-git] failure at common/block.c:248/block_put()!   Sascha Hauer
• [BUG: barebox-git] failure at common/block.c:248/block_put()!   Roberto Nibali
• [BUG: barebox-git] failure at common/block.c:248/block_put()!   Sascha Hauer
• [OT?] recommendation for barebox-compatible MIPS dev kit?   Robert P. J. Day
• [PATCH 0/3] qemu-malta nor flash support   Sascha Hauer
• [PATCH 0/4] panda: misc patches   Anand Gadiyar
• [PATCH 0/4] panda: misc patches   Sascha Hauer
• [PATCH 0/4] Support Samsung S5PV210 CPU   Alexey Galakhov
• [PATCH 0/5] arch/arm: mioa701 linux booting   Robert Jarzmik
• [PATCH 0/5] arch/arm: mioa701 linux booting   Sascha Hauer
• [PATCH 0/8] arm: mxs: add ocotp write support   Wolfram Sang
• [PATCH 0/9] Minimal S5PV210 support   Alexey Galakhov
• [PATCH 00/11 v3] improve complete support   Sascha Hauer
• [PATCH 01/16] eukrea_cpuimx25: workaround ENGcm09152   Eric Bénard
• [PATCH 02/16] eukrea_cpuimx25: add display choice in environment   Eric Bénard
• [PATCH 03/16] eukrea_cpuimx25: update defconfig   Eric Bénard
• [PATCH 04/16] eukrea_cpuimx35: add display choice in environment   Eric Bénard
• [PATCH 05/16] eukrea_cpuimx35: update defconfig   Eric Bénard
• [PATCH 06/16] eukrea_cpuimx51: updated env   Eric Bénard
• [PATCH 07/16] eukrea_cpuimx51: update defconfig   Eric Bénard
• [PATCH 08/16] eukrea_cpuimx25: use switch action to launch usbserial or dfu   Eric Bénard
• [PATCH 09/16] eukrea_cpuimx35: use switch action to launch usbserial or dfu   Eric Bénard
• [PATCH 1/1] complete: eth typo fix   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] complete: fix duplicate env eval list   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] complete: fix duplicate env eval list   Antony Pavlov
• [PATCH 1/1] linux/types.h: define phys_size_t   Renaud Barbier
• [PATCH 1/1] linux/types.h: define phys_size_t   Sascha Hauer
• [PATCH 1/1] menu: export box state to menu_box_state when using a command   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] ppc io.h: update following MMIO primitives fix   Renaud Barbier
• [PATCH 1/1] ppc io.h: update following MMIO primitives fix   Sascha Hauer
• [PATCH 1/1] ppc reloc.S: use a common trap relocation function   Renaud Barbier
• [PATCH 1/1] ppc reloc.S: use a common trap relocation function   Sascha Hauer
• [PATCH 1/2] add 'global' command   Sascha Hauer
• [PATCH 1/2] add qsort support   Sascha Hauer
• [PATCH 1/2] ARM Freescale i.MX51 babbage: switch to new default env   Sascha Hauer
• [PATCH 1/2] ARM startup: invalidate I-cache before jumping to relocated binary   Sascha Hauer
• [PATCH 1/2] block: propagate error code from block_get   Sascha Hauer
• [PATCH 1/2] block: propagate error code from block_get   Roberto Nibali
• [PATCH 1/2] i.MX51: Changed naming registers and procedures for SPI   Alexander Shiyan
• [PATCH 1/2] i.MX51: Changed naming registers and procedures for SPI   Sascha Hauer
• [PATCH 1/2] i.MX51 clock: Added lp_apm clock support for frequency calculations.   Alexander Shiyan
• [PATCH 1/2] i.MX51 clock: Added lp_apm clock support for frequency calculations.   Sascha Hauer
• [PATCH 1/2] i.MX SPI: Setup SPI chipselect to inactive state while initializing device   Alexander Shiyan
• [PATCH 1/2] i.MX SPI: Setup SPI chipselect to inactive state while initializing device   Sascha Hauer
• [PATCH 1/2] i2c: Fix barebox crash when 'count' is not set for i2c_read command   Alexander Shiyan
• [PATCH 1/2] i2c: Fix barebox crash when 'count' is not set for i2c_read command   Sascha Hauer
• [PATCH 1/2] i2c: Fix barebox crash when 'count' is not set for i2c_read command   Alexander Shiyan
• [PATCH 1/2] magicvar: Add magicvar macro with additional name argument   Sascha Hauer
• [PATCH 1/2] menu: add support to do not display the entry number   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] MIPS: add common header file for DEBUG_LL via NS16550   Antony Pavlov
• [PATCH 1/2] MIPS: add common header file for DEBUG_LL via NS16550   Sascha Hauer
• [PATCH 1/2] parameter: return empty string for unset parameters   Sascha Hauer
• [PATCH 1/2] PCM038: Move USBH2 initialization to PCM970   Alexander Shiyan
• [PATCH 1/2] PCM038: Move USBH2 initialization to PCM970   Juergen Beisert
• [PATCH 1/2] PCM038: Move USBH2 initialization to PCM970   Alexander Shiyan
• [PATCH 1/2] S5P DRAM support   Alexey Galakhov
• [PATCH 1/2] S5P DRAM support   Sascha Hauer
• [PATCH 1/2] usb ehci: Add resource sizes   Sascha Hauer
• [PATCH 1/3] add Calao QIL A9260 support and MB-QIL A9260 Motherboard support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] bootm: Add default images variables   Sascha Hauer
• [PATCH 1/4] panda: fix crash when not using barebox as second stage   Anand Gadiyar
• [PATCH 1/4] PCM038: Update board description   Alexander Shiyan
• [PATCH 1/4] PCM038: Update board description   Sascha Hauer
• [PATCH 1/4] Support most Samsung SoCs in S3C serial driver   Alexey Galakhov
• [PATCH 1/5] arm/board: mioa701 align kernel options with kernel mtd   Robert Jarzmik
• [PATCH 1/7] Make S3C24xx config options available for all S3Cs   Alexey Galakhov
• [PATCH 1/7] Make S3C24xx config options available for all S3Cs   Alexey Galakhov
• [PATCH 1/7] Support most Samsung SoCs in S3C serial driver   Alexey Galakhov
• [PATCH 1/7] Support most Samsung SoCs in S3C serial driver   Juergen Beisert
• [PATCH 1/7] Support most Samsung SoCs in S3C serial driver   Alexey Galakhov
• [PATCH 1/7] Support most Samsung SoCs in S3C serial driver   Sascha Hauer
• [PATCH 1/8] arm: mxs: make get_hclk result useable for upcoming set_hclk   Wolfram Sang
• [PATCH 1/9] Support most Samsung SoCs in S3C serial driver   Alexey Galakhov
• [PATCH 10/16] fs/tftp: depend on NET_TFTP   Eric Bénard
• [PATCH 10/16] fs/tftp: depend on NET_TFTP   Sascha Hauer
• [PATCH 10/16] fs/tftp: depend on NET_TFTP   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/16] fs/tftp: depend on NET_TFTP   Sascha Hauer
• [PATCH 11/16] iim: don't try to set ethaddr when NET is not selected   Eric Bénard
• [PATCH 11/16] iim: don't try to set ethaddr when NET is not selected   Sascha Hauer
• [PATCH 12/16] fec_imx: restart aneg at open and not at init   Eric Bénard
• [PATCH 12/16] fec_imx: restart aneg at open and not at init   Sascha Hauer
• [PATCH 12/16] fec_imx: restart aneg at open and not at init   Eric Bénard
• [PATCH 12/16] fec_imx: restart aneg at open and not at init   Sascha Hauer
• [PATCH 13/16] eukrea_cpuimx25: fix PHY address   Eric Bénard
• [PATCH 14/16] eukrea_cpuimx35: fix PHY address   Eric Bénard
• [PATCH 14/16] eukrea_cpuimx35: fix PHY address   Sascha Hauer
• [PATCH 14/16] eukrea_cpuimx35: fix PHY address   Eric Bénard
• [PATCH 15/16] eukrea_cpuimx25&35: update init_board   Eric Bénard
• [PATCH 16/16] eukrea_cpuimx25&35: update defconfig   Eric Bénard
• [PATCH 16/16] eukrea_cpuimx25&35: update defconfig   Sascha Hauer
• [PATCH 16/16] eukrea_cpuimx25&35: update defconfig   Eric Bénard
• [PATCH 2/2] Add compressed barebox_default_env to .gitignore   Alexander Shiyan
• [PATCH 2/2] Add FriendlyArm Tiny210 board (S5PV210)   Alexey Galakhov
• [PATCH 2/2] Add FriendlyArm Tiny210 board (S5PV210)   Sascha Hauer
• [PATCH 2/2] Add FriendlyArm Tiny210 board (S5PV210)   Alexey Galakhov
• [PATCH 2/2] ARM startup: Do call __mmu_cache_flush during startup   Sascha Hauer
• [PATCH 2/2] block: do not BUG() on failed block_get   Sascha Hauer
• [PATCH 2/2] block: do not BUG() on failed block_get   Roberto Nibali
• [PATCH 2/2] booting: more flexible Linux bootargs generation   Sascha Hauer
• [PATCH 2/2] defaultenv-2: automount script: run mount only when ifup succeeds   Sascha Hauer
• [PATCH 2/2] flexible bootargs: Add magicvar descriptions   Sascha Hauer
• [PATCH 2/2] glob: Add sorted output support   Sascha Hauer
• [PATCH 2/2] i.MX51: Added helper for SDHC3 registration.   Alexander Shiyan
• [PATCH 2/2] i.MX51 clock: Added USB clock to dump_clocks command.   Alexander Shiyan
• [PATCH 2/2] i2c: Added switch for allowing usage 16bit register addresses   Alexander Shiyan
• [PATCH 2/2] i2c: Added switch for allowing usage 16bit register addresses   Sascha Hauer
• Re[2]: [PATCH 2/2] i2c: Added switch for allowing usage 16bit register addresses   Alexander Shiyan
• [PATCH 2/2] i2c: Added switch for allowing usage 16bit register addresses   Sascha Hauer
• [PATCH 2/2] i2c: Added switch for allowing usage 16bit register addresses   Alexander Shiyan
• [PATCH 2/2] i2c: Added switch for allowing usage 16bit register addresses   Sascha Hauer
• [PATCH 2/2] i2c: Added switch for allowing usage 16bit register addresses   Alexander Shiyan
• [PATCH 2/2] menu: add support for disable entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] menu: add support for disable entry   Sascha Hauer
• [PATCH 2/2] menu: add support for disable entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] MIPS: malta: use common DEBUG_LL code for NS16550   Antony Pavlov
• [PATCH 2/2] parameter: remove unused struct member   Sascha Hauer
• [PATCH 2/2] PCM038: Remove now unused preset for SPI chipselect.   Alexander Shiyan
• [PATCH 2/2] usb ehci: Use zalloc to allocate ehci structure   Sascha Hauer
• [PATCH 2/3] Add next generation default environment template   Sascha Hauer
• [PATCH 2/3] at91: switch uart registration to inline   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] Fine split S3C arch dependencies from generic code   Alexey Galakhov
• [PATCH 2/4] Fine split S3C arch dependencies from generic code   Juergen Beisert
• [PATCH 2/4] Fine split S3C arch dependencies from generic code   Alexey Galakhov
• [PATCH 2/4] Fine split S3C arch dependencies from generic code   Juergen Beisert
• [PATCH 2/4] Fine split S3C arch dependencies from generic code   Alexey Galakhov
• [PATCH 2/4] Fine split S3C arch dependencies from generic code   Alexey Galakhov
• [PATCH 2/4] Fine split S3C arch dependencies from generic code   Juergen Beisert
• [PATCH 2/4] Fine split S3C arch dependencies from generic code   Alexey Galakhov
• [PATCH 2/4] Fine split S3C arch dependencies from generic code   Juergen Beisert
• [PATCH 2/4] Fine split S3C arch dependencies from generic code   Alexey Galakhov
• [PATCH 2/4] panda: add i2c and twlcore to panda   Anand Gadiyar
• [PATCH 2/4] PCM038: Call power_init() after initializing SPI.   Alexander Shiyan
• [PATCH 2/5] arch/arm: mioa701 make autoboot of Linux work   Robert Jarzmik
• [PATCH 2/7] Split S3C generic and S3C24xx specific code   Alexey Galakhov
• [PATCH 2/7] Split S3C generic and S3C24xx specific code   Sascha Hauer
• [PATCH 2/7] Split S3C generic and S3C24xx specific code   Alexey Galakhov
• [PATCH 2/7] Split S3C generic and S3C24xx specific code   Juergen Beisert
• [PATCH 2/7] Split S3C generic and S3C24xx specific code   Alexey Galakhov
• [PATCH 2/7] Split S3C generic and S3C24xx specific code   Sascha Hauer
• [PATCH 2/7] Split S3C generic and S3C24xx specific code   Sascha Hauer
• [PATCH 2/7] Split S3C generic and S3C24xx specific code   Alexey Galakhov
• [PATCH 2/8] arm: mxs: add imx_set_hclk   Wolfram Sang
• [PATCH 2/9] Fine split S3C arch dependencies from generic code   Alexey Galakhov
• [PATCH 2/9] Fine split S3C arch dependencies from generic code   Juergen Beisert
• [PATCH 2/9] Fine split S3C arch dependencies from generic code   Sascha Hauer
• [PATCH 2/9] Fine split S3C arch dependencies from generic code   Alexey Galakhov
• [PATCH 2/9] Fine split S3C arch dependencies from generic code   Sascha Hauer
• [PATCH 2/9] Fine split S3C arch dependencies from generic code   Alexey Galakhov
• [PATCH 2/9] Fine split S3C arch dependencies from generic code   Juergen Beisert
• [PATCH 2/9] Fine split S3C arch dependencies from generic code   Alexey Galakhov
• [PATCH 3/3] ARM pcm038: Switch to new environment   Sascha Hauer
• [PATCH 3/3] at91sam9260ek/9260ek/9g20ek: drop bootz and fat write support to fit in flash   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] Minimal S5PV210 + Tiny210 support (2nd stage only)   Alexey Galakhov
• [PATCH 3/4] Minimal S5PV210 + Tiny210 support (2nd stage only)   Juergen Beisert
• [PATCH 3/4] Minimal S5PV210 + Tiny210 support (2nd stage only)   Alexey Galakhov
• [PATCH 3/4] panda: add LED support   Anand Gadiyar
• [PATCH 3/4] PCM038: Remove unused includes   Alexander Shiyan
• [PATCH 3/5] arch/arm: mioa701 add IPL and DPS1 updater   Robert Jarzmik
• [PATCH 3/7] Add support for Samsung S5P architecture (S5PV210)   Alexey Galakhov
• [PATCH 3/7] Add support for Samsung S5P architecture (S5PV210)   Alexey Galakhov
• [PATCH 3/8] arm: mxs: refactor access to power domain   Wolfram Sang
• [PATCH 3/9] Minimal S5PV210 + Tiny210 support (2nd stage only)   Alexey Galakhov
• [PATCH 3/9] Minimal S5PV210 + Tiny210 support (2nd stage only)   Juergen Beisert
• [PATCH 3/9] Minimal S5PV210 + Tiny210 support (2nd stage only)   Alexey Galakhov
• [PATCH 3/9] Minimal S5PV210 + Tiny210 support (2nd stage only)   Juergen Beisert
• [PATCH 3/9] Minimal S5PV210 + Tiny210 support (2nd stage only)   Juergen Beisert
• [PATCH 3/9] Minimal S5PV210 + Tiny210 support (2nd stage only)   Alexey Galakhov
• [PATCH 3/9] Minimal S5PV210 + Tiny210 support (2nd stage only)   Juergen Beisert
• [PATCH 3/9] Minimal S5PV210 + Tiny210 support (2nd stage only)   Alexey Galakhov
• [PATCH 4/4] panda: update defconfig for i2c and led support   Anand Gadiyar
• [PATCH 4/4] PCM038: Initial PCM970 development board support   Alexander Shiyan
• [PATCH 4/4] S5PV210 iROM magic boot code   Alexey Galakhov
• [PATCH 4/4] S5PV210 iROM magic boot code   Juergen Beisert
• [PATCH 4/4] S5PV210 iROM magic boot code   Alexey Galakhov
• [PATCH 4/5] arch/arm: mioa701 use maximum CPU frequency   Robert Jarzmik
• [PATCH 4/7] S5P boot header and image generator   Alexey Galakhov
• [PATCH 4/7] S5P boot header and image generator   Alexey Galakhov
• [PATCH 4/8] arm: mxs: add POWER_BASE for MX28, too   Wolfram Sang
• [PATCH 4/9] S5PV210 iROM magic boot code   Alexey Galakhov
• [PATCH 4/9] S5PV210 iROM magic boot code   Sascha Hauer
• [PATCH 4/9] S5PV210 iROM magic boot code   Alexey Galakhov
• [PATCH 5/5] arch/arm: mioa701 improve barebox_update script   Robert Jarzmik
• [PATCH 5/7] S5P lowlevel clock init   Alexey Galakhov
• [PATCH 5/8] arm: mxs: add functions to get/set vddio   Wolfram Sang
• [PATCH 5/9] S5P DRAM support   Alexey Galakhov
• [PATCH 6/7] S5P DRAM support   Alexey Galakhov
• [PATCH 6/8] arm: mxs: refactor timeout routine for ocotp   Wolfram Sang
• [PATCH 6/9] S5P lowlevel clock init   Alexey Galakhov
• [PATCH 7/7] Add FriendlyArm Tiny210 board (S5PV210)   Alexey Galakhov
• [PATCH 7/8] arm: mxs: use consistent naming for #defines for ocotp   Wolfram Sang
• [PATCH 7/9] Revert "S5PV210 iROM magic boot code"   Alexey Galakhov
• [PATCH 8/8] arm: mxs: add write support for ocotp   Wolfram Sang
• [PATCH 8/9] S5P iROM boot support - improved   Alexey Galakhov
• [PATCH 9/9] S5P boot header and image generator   Alexey Galakhov
• [PATCH] Add glob sort support   Sascha Hauer
• [PATCH] ARM: Changes to bootz.   Krzysztof Halasa
• [PATCH] ARM: Changes to bootz.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arm: mxs: get MAC from OCOTP for MX28EVK   Wolfram Sang
• [PATCH] arm: mxs: get MAC from OCOTP for MX28EVK   Sascha Hauer
• [PATCH] ARM: put a valid "barebox" signature in the header on big-endian systems.   Krzysztof Halasa
• [PATCH] ARM: put a valid "barebox" signature in the header on big-endian systems.   Sascha Hauer
• [PATCH] ARM: put a valid "barebox" signature in the header on big-endian systems.   Krzysztof Halasa
• [PATCH] ARM: put a valid "barebox" signature in the header on big-endian systems.   Sascha Hauer
• [PATCH] ARM: put a valid "barebox" signature in the header on big-endian systems.   Uwe Kleine-König
• [PATCH] ARM: put a valid "barebox" signature in the header on big-endian systems.   Antony Pavlov
• [PATCH] ARM: put a valid "barebox" signature in the header on big-endian systems.   Uwe Kleine-König
• [PATCH] ARM: put a valid "barebox" signature in the header on big-endian systems.   Krzysztof Halasa
• [PATCH] ARM: put a valid "barebox" signature in the header on big-endian systems.   Sascha Hauer
• [PATCH] ARM: remove unused struct param_struct and related info.   Krzysztof Halasa
• [PATCH] ARM: remove unused struct param_struct and related info.   Sascha Hauer
• [PATCH] ARM: Shutdown barebox (MMU) before setting ATAGS to avoid page #0 fault.   Krzysztof Halasa
• [PATCH] ARM: Shutdown barebox (MMU) before setting ATAGS to avoid page #0 fault.   Sascha Hauer
• [PATCH] arm: update mach-types   Jan Luebbe
• [PATCH] ARM i.MX51 babbage: move fec init after power init   Sascha Hauer
• [PATCH] ARM i.MX51 babbage: use dedicated chipselect for PMIC spi   Sascha Hauer
• [PATCH] ARM i.MX: Possible bug fixed due misspelling when copy/paste   Alexander Shiyan
• [PATCH] ARM i.MX: Possible bug fixed due misspelling when copy/paste   Sascha Hauer
• Re[2]: [PATCH] ARM i.MX: Possible bug fixed due misspelling when copy/paste   Alexander Shiyan
• [PATCH] block: Fix printf warning   Alexander Shiyan
• [PATCH] block: Fix printf warning   Sascha Hauer
• [PATCH] common: Make HUSH_SHELL select PROCESS_ESCAPE_SEQUENCE   Alan Ott
• [PATCH] common: Make MENU depend on PROCESS_ESCAPE_SEQUENCE   Alan Ott
• [PATCH] common: Make MENU depend on PROCESS_ESCAPE_SEQUENCE   Sascha Hauer
• [PATCH] common: Make MENU depend on PROCESS_ESCAPE_SEQUENCE   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] common: Make MENU depend on PROCESS_ESCAPE_SEQUENCE   Alan Ott
• [PATCH] common: Make MENU depend on PROCESS_ESCAPE_SEQUENCE   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] common: Make MENU depend on PROCESS_ESCAPE_SEQUENCE   Alan Ott
• [PATCH] Cosmetic: fix endianness convertions in read[wlq]().   Krzysztof Halasa
• [PATCH] Cosmetic: fix endianness convertions in read[wlq]().   Sascha Hauer
• [PATCH] Cosmetic: fix endianness convertions in read[wlq]().   Krzysztof Halasa
• [PATCH] defaultenv: don't overwrite in config   Uwe Kleine-König
• [PATCH] defaultenv: don't overwrite in config   Uwe Kleine-König
• [PATCH] defaultenv: don't overwrite in config   Sascha Hauer
• [PATCH] dns: fix recursive loop   Sascha Hauer
• [PATCH] drivers/spi/spi.c: when allocating a struct device_d specify id as -1   Jan Luebbe
• [PATCH] drivers/spi/spi.c: when allocating a struct device_d specify id as -1   Sascha Hauer
• [PATCH] echo: Fix help   Sascha Hauer
• [PATCH] edit: Add a status line   Sascha Hauer
• [PATCH] fix typo addreee -> address   Uwe Kleine-König
• [PATCH] fix typo addreee -> address   Sascha Hauer
• [PATCH] fix typo funtion -> function   Antony Pavlov
• [PATCH] fix typo funtion -> function   Sascha Hauer
• [PATCH] fs: Add NFS support   Sascha Hauer
• [PATCH] global shell variables and more flexible bootargs   Sascha Hauer
• [PATCH] hush: bail out of scripts on syntax error   Sascha Hauer
• [PATCH] hush: bail out of scripts on syntax error   Uwe Kleine-König
• [PATCH] hush: do not convert to return code too early   Sascha Hauer
• [PATCH] i.MX25: fix eSDHC1 pads   Eric Bénard
• [PATCH] i.MX25: fix eSDHC1 pads   Sascha Hauer
• [PATCH] i.MX25: fix eSDHC1 pads   Eric Bénard
• [PATCH] i.MX25: fix eSDHC1 pads   Sascha Hauer
• [PATCH] i.MX25: fix eSDHC1 pads   Roberto Nibali
• [PATCH] i.MX25: fix eSDHC1 pads   Sascha Hauer
• [PATCH] i.MX51: Raise frequency for SDHC by switch to PLL2 source   Alexander Shiyan
• [PATCH] i.MX51: Raise frequency for SDHC by switch to PLL2 source   Sascha Hauer
• [PATCH] lseek: return -1 instead of -errno   Sascha Hauer
• [PATCH] Make errno a positive value   Sascha Hauer
• [PATCH] mfd mc13xxxx: Set mc_dev to NULL on failure   Sascha Hauer
• [PATCH] MIPS: remove unused processor-specific constants and macros   Antony Pavlov
• [PATCH] NOR flash: reduce size of cfiword_t if not using 64-bit bus.   Krzysztof Halasa
• [PATCH] NOR flash: reduce size of cfiword_t if not using 64-bit bus.   Sascha Hauer
• [PATCH] NOR flash: reduce size of cfiword_t if not using 64-bit bus.   Krzysztof Halasa
• [PATCH] NOR flash: reduce size of cfiword_t if not using 64-bit bus.   Sascha Hauer
• [PATCH] ohci-hcd: use dma_flush/inv_range to allow using the driver with enabled MMU   Jan Luebbe
• [PATCH] PCM038: choose boot device by parsing barebox_loc magic variable   Alexander Shiyan
• [PATCH] PCM038: Removed unnecessary call to gpio_set_value   Alexander Shiyan
• [PATCH] PCM038: Removed unnecessary call to gpio_set_value   Sascha Hauer
• [PATCH] PCM970: Added support for CompactFlash   Alexander Shiyan
• [PATCH] PCM970: Added support for CompactFlash   Sascha Hauer
• Re[2]: [PATCH] PCM970: Added support for CompactFlash   Alexander Shiyan
• [PATCH] ramfs: rember last accessed chunk   Jan Weitzel
• [PATCH] ramfs: rember last accessed chunk   Sascha Hauer
• [PATCH] ramfs: rember last accessed chunk   Uwe Kleine-König
• [PATCH] README: change path to sandbox environment   Alan Ott
• [PATCH] README: change path to sandbox environment   Sascha Hauer
• [PATCH] README: fix some typos   Antony Pavlov
• [PATCH] README: fix some typos   Sascha Hauer
• [PATCH] Removed duplicate definition for DEVFS_PARTITION_xxx   Alexander Shiyan
• [PATCH] Removed duplicate definition for DEVFS_PARTITION_xxx   Sascha Hauer
• [PATCH] run_shell: run again on ctrl-c   Sascha Hauer
• [PATCH] timeout: allow to set a variable with the key pressed   Sascha Hauer
• [PATCH] uimage/file_to_sdram: fix resource allocation   Sascha Hauer
• [PATCH] usb storage: fix driver name   Sascha Hauer
• [PATCH] video/s3c24xx.c: fix doxygen comment for s3cfb_activate_var()   Antony Pavlov
• [PATCH v2 0/3] MIPS: import CPU and cache detection code from Linux 3.4   Antony Pavlov
• [PATCH v2 01/10] eukrea_cpuimx25: workaround ENGcm09152   Eric Bénard
• [PATCH v2 01/10] eukrea_cpuimx25: workaround ENGcm09152   Sascha Hauer
• [PATCH v2 01/10] eukrea_cpuimx25: workaround ENGcm09152   Eric Bénard
• [PATCH v20120528 0/5] ARM: initial Tegra support   Antony Pavlov
• [PATCH v20120528 1/5] ARM: initial Tegra support   Antony Pavlov
• [PATCH v20120528 2/5] ARM: Tegra: add Toshiba AC100 support   Antony Pavlov
• [PATCH v20120528 3/5] usb: set MAXINTERFACES = 16   Antony Pavlov
• [PATCH v20120528 4/5] toshiba-ac100: add USB host support   Antony Pavlov
• [PATCH v20120528 4/5] toshiba-ac100: add USB host support   Sascha Hauer
• [PATCH v20120528 4/5] toshiba-ac100: add USB host support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v20120528 4/5] toshiba-ac100: add USB host support   Sascha Hauer
• [PATCH v20120528 4/5] toshiba-ac100: add USB host support   Antony Pavlov
• [PATCH v20120528 4/5] toshiba-ac100: add USB host support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v20120528 4/5] toshiba-ac100: add USB host support   Sascha Hauer
• [PATCH v20120528 5/5] toshiba_ac100: add defconfig   Antony Pavlov
• [PATCH v20120529.1 1/2] toshiba_ac100: add USB host support   Antony Pavlov
• [PATCH v20120529.1 2/2] toshiba_ac100: add defconfig   Antony Pavlov
• [PATCH v20120529 1/2] toshiba_ac100: add USB host support   Antony Pavlov
• [PATCH v20120529 1/2] toshiba_ac100: add USB host support   Sascha Hauer
• [PATCH v20120529 2/2] toshiba_ac100: add defconfig   Antony Pavlov
• [PATCH v2 02/10] eukrea_cpuimx25: add display choice in environment   Eric Bénard
• [PATCH v2 03/10] eukrea_cpuimx35: add display choice in environment   Eric Bénard
• [PATCH v2 04/10] eukrea_cpuimx51: updated env   Eric Bénard
• [PATCH v2 05/10] eukrea_cpuimx25/35/51: update defconfig   Eric Bénard
• [PATCH v2 06/10] eukrea_cpuimx25&35: use switch action to launch usbserial or dfu   Eric Bénard
• [PATCH v2 07/10] iim: fix compilation when NET is not selected   Eric Bénard
• [PATCH v2 08/10] eukrea_cpuimx25: fix PHY address   Eric Bénard
• [PATCH v2 09/10] eukrea_cpuimx35: fix PHY address and clean code   Eric Bénard
• [PATCH v2 1/3] MIPS: introduce C architecture-specific low-level init   Antony Pavlov
• [PATCH v2 10/10] fec_imx: restart aneg at open and not at init   Eric Bénard
• [PATCH v2 2/3] MIPS: import CPU and cache detection code from Linux 3.4   Antony Pavlov
• [PATCH v2 3/3] MIPS: cpuinfo: import CPU message from Linux 3.4   Antony Pavlov
• [PATCH v2] common: Make MENU select PROCESS_ESCAPE_SEQUENCE if HUSH_SHELL is selected   Alan Ott
• [PATCH v2] common: Make MENU select PROCESS_ESCAPE_SEQUENCE if HUSH_SHELL is selected   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] common: Make MENU select PROCESS_ESCAPE_SEQUENCE if HUSH_SHELL is selected   Alan Ott
• [PATCH v2] common: Make MENU select PROCESS_ESCAPE_SEQUENCE if HUSH_SHELL is selected   Sascha Hauer
• [PATCH v2] drivers/spi/spi.c: use DEVICE_ID_DYNAMIC when allocating a struct device_d   Jan Luebbe
• [PATCH v2] drivers/spi/spi.c: use DEVICE_ID_DYNAMIC when allocating a struct device_d   Sascha Hauer
• [PATCH v2] PCM970: Added support for CompactFlash   Alexander Shiyan
• [PATCH v2] PCM970: Added support for CompactFlash   Sascha Hauer
• Re[2]: [PATCH v2] PCM970: Added support for CompactFlash   Alexander Shiyan
• [PATCH v2] PCM970: Added support for CompactFlash   Sascha Hauer
• [PATCH v2 xx/10]   Eric Bénard
• [PATCHv3 0/7] Cleaned up version of S5PV210 code   Alexey Galakhov
• [PATCH V4 0/4] MPC85xx support   Renaud Barbier
• [PATCH V4 0/4] MPC85xx support   Sascha Hauer
• [PATCHv4 0/7] S5PV210 support (upd.)   Alexey Galakhov
• [PATCHv4 0/7] S5PV210 support (upd.)   Sascha Hauer
• [PATCHv4 0/7] S5PV210 support (upd.)   Alexey Galakhov
• [PATCH V4 1/4] Preparation stage to support multiple PPC architectures   Renaud Barbier
• [PATCH V4 2/4] Minimal support of the MPC85xx architecture   Renaud Barbier
• [PATCHv4 2/7] Split S3C generic and S3C24xx specific code   Alexey Galakhov
• [PATCH V4 3/4] Header files update to support the mpc85xx.   Renaud Barbier
• [PATCH V4 3/4] Header files update to support the mpc85xx.   Sascha Hauer
• [PATCH V4 4/4] Minimal P2020RDB platform support and configuration file   Renaud Barbier
• [PATCHv4 5/7] S5P lowlevel clock init   Alexey Galakhov
• [PATCHv4 6/7] S5P DRAM support   Alexey Galakhov
• [PATCHv4 6/7] S5P DRAM support   Sascha Hauer
• [PATCHv4 6/7] S5P DRAM support   Alexey Galakhov
• [PATCHv4 6/7] S5P DRAM support   Sascha Hauer
• [PATCHv4 6/7] S5P DRAM support   Alexey Galakhov
• [PATCHv4 7/7] Add FriendlyArm Tiny210 board (S5PV210)   Alexey Galakhov
• [PATCH V5 0/9] MPC85xx support   Renaud Barbier
• [PATCH V5 0/9] MPC85xx support   Sascha Hauer
• [PATCH V5 1/9] Initial Freescale 85xx Headers.   Renaud Barbier
• [PATCH V5 2/9] Initial e500v2 start up code   Renaud Barbier
• [PATCH V5 3/9] e500v2 traps and TLB support code   Renaud Barbier
• [PATCH V5 4/9] 85xx: LAW and LBC initialization   Renaud Barbier
• [PATCH V5 5/9] 85xx clocking support   Renaud Barbier
• [PATCH V5 6/9] MPC85xx start-up support code   Renaud Barbier
• [PATCH V5 7/9] Set _text_base to the firmware relocation address   Renaud Barbier
• [PATCH V5 8/9] 85xx core support build files   Renaud Barbier
• [PATCH V5 9/9] Minimal P2020RDB platform support and configuration file   Renaud Barbier
• [Pull request] Minimal S5PV210 support   Alexey Galakhov
• [Pull request] Minimal S5PV210 support   Sascha Hauer
• [RFC 0/3] MIPS: add the initial support for lowlevel init   Antony Pavlov
• [RFC 0/3] MIPS: add the initial support for lowlevel init   Sascha Hauer
• [RFC 0/3] MIPS: add the initial support for lowlevel init   Antony Pavlov
• [RFC 0/3] MIPS: import CPU and cache detection code from Linux   Antony Pavlov
• [RFC 0/3] MIPS: import CPU and cache detection code from Linux   Sascha Hauer
• [RFC 0/3] MIPS: import CPU and cache detection code from Linux   Jean-Christophe PLAGNIOL-VILLARD
• [RFC 0/5] MIPS: add XBurst processor family support   Antony Pavlov
• [RFC 0/5] MIPS: add XBurst processor family support   Sascha Hauer
• [RFC 1/3] MIPS: introduce C architecture-specific low-level init   Antony Pavlov
• [RFC 1/3] MIPS: introduce C architecture-specific low-level init   Jean-Christophe PLAGNIOL-VILLARD
• [RFC 1/3] MIPS: move start.S code to .text_entry section   Antony Pavlov
• [RFC 1/5] MIPS: add common header file for DEBUG_LL via NS16550   Antony Pavlov
• [RFC 1/5] MIPS: add common header file for DEBUG_LL via NS16550   Sascha Hauer
• [RFC 1/5] MIPS: add common header file for DEBUG_LL via NS16550   Antony Pavlov
• [RFC 2/3] MIPS: add the initial support for lowlevel init   Antony Pavlov
• [RFC 2/3] MIPS: add the initial support for lowlevel init   Sascha Hauer
• [RFC 2/3] MIPS: add the initial support for lowlevel init   Antony Pavlov
• [RFC 2/3] MIPS: import CPU and cache detection code from Linux   Antony Pavlov
• [RFC 2/5] MIPS: add XBurst processor family support   Antony Pavlov
• [RFC 3/3] MIPS: cpuinfo: import CPU message from Linux   Antony Pavlov
• [RFC 3/3] MIPS: malta: add bogus lowlevel init   Antony Pavlov
• [RFC 3/5] MISP: XBurst: add JZ4755 CPU support   Antony Pavlov
• [RFC 4/5] MIPS: XBurst: add Ritmix RZX-50 board support   Antony Pavlov
• [RFC 4/5] MIPS: XBurst: add Ritmix RZX-50 board support   Jean-Christophe PLAGNIOL-VILLARD
• [RFC 5/5] MIPS: add defconfig for Ritmix RZX-50 board   Antony Pavlov
• [RFC:PATCH 0/2] Revised S5PV210 DRAM support   Alexey Galakhov
• [RFC] MIPS: initial modules support   Antony Pavlov
• [RFC] MIPS: initial modules support   Sascha Hauer
• [RFC] MIPS: XBurst: suitable solution for per-board debug_ll options   Antony Pavlov
• [RFC] MIPS: XBurst: suitable solution for per-board debug_ll options   Sascha Hauer
• [RFC] MIPS: XBurst: suitable solution for per-board debug_ll options   Antony Pavlov
• [RFC] ramfs: rember last accessed chunk   Jan Weitzel
• [RFC] ramfs: rember last accessed chunk   Sascha Hauer
• [RFC v2 0/4] MIPS: add XBurst processor family support   Antony Pavlov
• [RFC v2 0/4] MIPS: add XBurst processor family support   Sascha Hauer
• [RFCv2 1/2] MIPS: start.S: add "barebox" label at _start + 0x10   Antony Pavlov
• [RFCv2 1/2] MIPS: start.S: add "barebox" label at _start + 0x10   Jean-Christophe PLAGNIOL-VILLARD
• [RFCv2 1/2] MIPS: start.S: add "barebox" label at _start + 0x10   Sascha Hauer
• [RFC v2 1/4] MIPS: add XBurst processor family support   Antony Pavlov
• [RFCv2 2/2] MIPS: bootm: add "MIPS barebox" handler   Antony Pavlov
• [RFC v2 2/4] MIPS: XBurst: add JZ4755 CPU support   Antony Pavlov
• [RFC v2 3/4] MIPS: XBurst: add Ritmix RZX-50 board support   Antony Pavlov
• [RFC v2 4/4] MIPS: add defconfig for Ritmix RZX-50 board   Antony Pavlov
• Add magicvar description for flexible bootargs   Sascha Hauer
• Antwort: Re: string processing   christian.buettner at rafi.de
• Antwort: Re: string processing   Sascha Hauer
• barebox, omap3530_beagle_xload and qemu-linaro   Carlo Caione
• barebox, omap3530_beagle_xload and qemu-linaro   Sascha Hauer
• Booting mx25 based device from SD and NOR   Roberto Nibali
• Booting mx25 based device from SD and NOR   Sascha Hauer
• Booting mx25 based device from SD and NOR   Roberto Nibali
• Booting mx25 based device from SD and NOR   Eric Bénard
• Booting mx25 based device from SD and NOR   Roberto Nibali
• Booting mx25 based device from SD and NOR   Eric Bénard
• Booting mx25 based device from SD and NOR   Roberto Nibali
• Booting mx25 based device from SD and NOR   Eric Bénard
• Booting mx25 based device from SD and NOR   Sascha Hauer
• Booting mx25 based device from SD and NOR   Roberto Nibali
• Booting mx25 based device from SD and NOR   Roberto Nibali
• Booting mx25 based device from SD and NOR   Sascha Hauer
• Booting mx25 based device from SD and NOR   Eric Bénard
• Booting mx25 based device from SD and NOR   Roberto Nibali
• Booting mx25 based device from SD and NOR   Roberto Nibali
• Booting mx25 based device from SD and NOR   Sascha Hauer
• Booting mx25 based device from SD and NOR   Roberto Nibali
• Booting mx25 based device from SD and NOR   Roberto Nibali
• Booting mx25 based device from SD and NOR   Sascha Hauer
• Booting mx25 based device from SD and NOR   Juergen Beisert
• Booting mx25 based device from SD and NOR   Roberto Nibali
• Booting mx25 based device from SD and NOR   Sascha Hauer
• Booting PhyTec PCM043/IMX35 from USB/SD-Card   Peter Kuennemann at Crane-Soft
• Booting PhyTec PCM043/IMX35 from USB/SD-Card   Sascha Hauer
• Booting PhyTec PCM043/IMX35 from USB/SD-Card   Peter Kuennemann at Crane-Soft
• Booting PhyTec PCM043/IMX35 from USB/SD-Card   Sascha Hauer
• Booting PhyTec PCM043/IMX35 from USB/SD-Card   CRANESOFT
• build timestamps don't work   Antony Pavlov
• build timestamps don't work   Antony Pavlov
• build timestamps don't work   Sascha Hauer
• build timestamps don't work   Antony Pavlov
• build timestamps don't work   Antony Pavlov
• build timestamps don't work   Sascha Hauer
• build timestamps don't work   Antony Pavlov
• check if RGMII works   Maxim Gorbachyov
• check if RGMII works   Sascha Hauer
• Check if valid kernel and/or FS   Benoit RAT
• Check if valid kernel and/or FS   Eric Bénard
• Check if valid kernel and/or FS   Benoit RAT
• Check if valid kernel and/or FS   Jean-Christophe PLAGNIOL-VILLARD
• Check if valid kernel and/or FS   Eric Bénard
• Check if valid kernel and/or FS   Sascha Hauer
• device parameter patches   Sascha Hauer
• drivers/power ? drivers/hwmon ?   Robin van der Gracht
• drivers/power ? drivers/hwmon ?   Sascha Hauer
• Flashing kernel from Linux   Patrick Gerber
• Flashing kernel from Linux   Uwe Kleine-König
• hi!   Klokov Alexey
• improved complete support: the list of available variable name completions is dubbed   Antony Pavlov
• improved complete support: the list of available variable name completions is dubbed   Jean-Christophe PLAGNIOL-VILLARD
• improved complete support: the list of available variable name completions is dubbed   Eric Bénard
• improved complete support: the list of available variable name completions is dubbed   Eric Bénard
• improved complete support: the list of available variable name completions is dubbed   Sascha Hauer
• improved complete support: the list of available variable name completions is dubbed   Jean-Christophe PLAGNIOL-VILLARD
• Imx28 sdram initialisation?   Robin van der Gracht
• Imx28 sdram initialisation?   Juergen Beisert
• Is Barebox list always living?   Lionel Fiat
• Re: Is Barebox list always living?   Alexander Shiyan
• Is Barebox list always living?   Eric Bénard
• I wonder what exactly I was going to achieve.   Krzysztof Halasa
• Linuxtag 2012 - Tickets & Cookies :o)   Bjoern Buerger
• magicvar breaks tftp (or ramfs)   Eric Bénard
• magicvar breaks tftp (or ramfs)   Eric Bénard
• magicvar breaks tftp (or ramfs)   Sascha Hauer
• menu autodisplay does not work   Benoit RAT
• menu autodisplay does not work   Sascha Hauer
• missing sscanf   christian.buettner at rafi.de
• MTD NAND updates   Dirk Hörner
• MTD NAND updates   Sascha Hauer
• NAND defect Block handling   Jürgen Kilb
• NAND defect Block handling   Sascha Hauer
• new default environment   Sascha Hauer
• RFC: Fix big endian MMIO primitives.   Krzysztof Halasa
• RFC: Fix big endian MMIO primitives.   Sascha Hauer
• RFC: Fix big endian MMIO primitives.   Krzysztof Halasa
• RFC: Fix big endian MMIO primitives.   Sascha Hauer
• RFC: Fix big endian MMIO primitives.   Sascha Hauer
• RFC: Force a 2s delay on startup to allow bypassing /dev/env0.   Krzysztof Halasa
• RFC: Force a 2s delay on startup to allow bypassing /dev/env0.   Sascha Hauer
• RFC: Force a 2s delay on startup to allow bypassing /dev/env0.   Krzysztof Halasa
• RFC: Force a 2s delay on startup to allow bypassing /dev/env0.   Sascha Hauer
• RFC: Force a 2s delay on startup to allow bypassing /dev/env0.   Marc Reilly
• RFC: memmap() now returns NULL on failure.   Krzysztof Halasa
• RFC: memmap() now returns NULL on failure.   Sascha Hauer
• SD card probe failure   Roberto Nibali
• SD card probe failure   Sascha Hauer
• SD card probe failure   Eric Bénard
• SD card probe failure   Roberto Nibali
• SD card probe failure   Sascha Hauer
• SD card probe failure   Roberto Nibali
• string processing   christian.buettner at rafi.de
• string processing   Sascha Hauer
• support for OMAP-L138   斗破苍穷
• SVC32 and SP   Carlo Caione
• SVC32 and SP   Sascha Hauer
• SVC32 and SP   Carlo Caione
• SVC32 and SP   Sascha Hauer
• test   Klokov Alexey
• v2012.05.0   Sascha Hauer
• Your price   jean louis audigue
• 外贸五步法外贸五步法 shared photos with you   外贸五步法外贸五步法

Last message date: Thu May 31 16:08:34 EDT 2012
Archived on: Thu Sep 6 02:11:46 EDT 2012

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...