SD card probe failure

[Eric Bénard]

Hi,

Le Tue, 22 May 2012 20:48:38 +0200,
Sascha Hauer <s.hauer at pengutronix.de> a écrit :
> Does the SD card work in the first stage loader? If yes, you could try
> to remove the mux setup from barebox, so that you can be sure that you
> do not misconfigure things that were already configured correctly.
> I have no hardware handy to test the driver on a i.MX25, but Erics
> Eukrea board has MMC support, so I believe the driver should work in
> general.
> 
I don't remembed if SD is working under barebox on the i.MX25 but at
least our default configuration was booting from a SDCard the last time
I tested it.

Eric