[PATCH 14/16] eukrea_cpuimx35: fix PHY address

Sascha Hauer s.hauer at pengutronix.de
Thu May 17 13:42:53 EDT 2012


On Thu, May 17, 2012 at 05:46:16PM +0200, Eric Bénard wrote:
> Signed-off-by: Eric Bénard <eric at eukrea.com>
> ---
>  arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c |   90 ++++++++++----------
>  1 files changed, 45 insertions(+), 45 deletions(-)
> 
> diff --git a/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c b/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
> index bfdd9de..1869e9d 100644
> --- a/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
> +++ b/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
> @@ -58,7 +58,7 @@
>  
>  static struct fec_platform_data fec_info = {
>  	.xcv_type	= MII100,
> -	.phy_addr	= 0x1F,
> +	.phy_addr	= 0,
>  };

This patch seems to do more than what the subject suggests. What's the
stuff below?

Sascha

>  
>  struct imx_nand_platform_data nand_info = {
> @@ -143,49 +143,6 @@ static int eukrea_cpuimx35_mmu_init(void)
>  }
>  postmmu_initcall(eukrea_cpuimx35_mmu_init);
>  
> -static int eukrea_cpuimx35_devices_init(void)
> -{
> -#ifdef CONFIG_USB_GADGET
> -	unsigned int tmp;
> -#endif
> -	imx35_add_nand(&nand_info);
> -
> -	devfs_add_partition("nand0", 0x00000, 0x40000, PARTITION_FIXED, "self_raw");
> -	dev_add_bb_dev("self_raw", "self0");
> -	devfs_add_partition("nand0", 0x40000, 0x20000, PARTITION_FIXED, "env_raw");
> -	dev_add_bb_dev("env_raw", "env0");
> -
> -	imx35_add_fec(&fec_info);
> -	imx35_add_fb(&ipu_fb_data);
> -
> -	imx35_add_i2c0(NULL);
> -	imx35_add_mmc0(NULL);
> -
> -	/* led default off */
> -	gpio_direction_output(32 * 2 + 29, 1);
> -
> -	/* Switch : input */
> -	gpio_direction_input(32 * 2 + 25);
> -
> -#ifdef CONFIG_USB
> -	imx35_usb_init();
> -	add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
> -#endif
> -#ifdef CONFIG_USB_GADGET
> -	/* Workaround ENGcm09152 */
> -	tmp = readl(IMX_OTG_BASE + 0x608);
> -	writel(tmp | (1 << 23), IMX_OTG_BASE + 0x608);
> -	add_generic_device("fsl-udc", -1, NULL, IMX_OTG_BASE, 0x200,
> -			   IORESOURCE_MEM, &usb_pdata);
> -#endif
> -	armlinux_set_bootparams((void *)0x80000100);
> -	armlinux_set_architecture(MACH_TYPE_EUKREA_CPUIMX35SD);
> -
> -	return 0;
> -}
> -
> -device_initcall(eukrea_cpuimx35_devices_init);
> -
>  static struct pad_desc eukrea_cpuimx35_pads[] = {
>  	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
>  	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
> @@ -230,11 +187,54 @@ static struct pad_desc eukrea_cpuimx35_pads[] = {
>  	MX35_PAD_LD19__GPIO3_25,
>  };
>  
> -static int eukrea_cpuimx35_console_init(void)
> +static int eukrea_cpuimx35_devices_init(void)
>  {
> +#ifdef CONFIG_USB_GADGET
> +	unsigned int tmp;
> +#endif
>  	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
>  		ARRAY_SIZE(eukrea_cpuimx35_pads));
>  
> +	imx35_add_nand(&nand_info);
> +
> +	devfs_add_partition("nand0", 0x00000, 0x40000, PARTITION_FIXED, "self_raw");
> +	dev_add_bb_dev("self_raw", "self0");
> +	devfs_add_partition("nand0", 0x40000, 0x20000, PARTITION_FIXED, "env_raw");
> +	dev_add_bb_dev("env_raw", "env0");
> +
> +	imx35_add_fec(&fec_info);
> +	imx35_add_fb(&ipu_fb_data);
> +
> +	imx35_add_i2c0(NULL);
> +	imx35_add_mmc0(NULL);
> +
> +	/* led default off */
> +	gpio_direction_output(32 * 2 + 29, 1);
> +
> +	/* Switch : input */
> +	gpio_direction_input(32 * 2 + 25);
> +
> +#ifdef CONFIG_USB
> +	imx35_usb_init();
> +	add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
> +#endif
> +#ifdef CONFIG_USB_GADGET
> +	/* Workaround ENGcm09152 */
> +	tmp = readl(IMX_OTG_BASE + 0x608);
> +	writel(tmp | (1 << 23), IMX_OTG_BASE + 0x608);
> +	add_generic_device("fsl-udc", -1, NULL, IMX_OTG_BASE, 0x200,
> +			   IORESOURCE_MEM, &usb_pdata);
> +#endif
> +	armlinux_set_bootparams((void *)0x80000100);
> +	armlinux_set_architecture(MACH_TYPE_EUKREA_CPUIMX35SD);
> +
> +	return 0;
> +}
> +
> +device_initcall(eukrea_cpuimx35_devices_init);
> +
> +static int eukrea_cpuimx35_console_init(void)
> +{
>  	/* screen default on to prevent flicker */
>  	gpio_direction_output(4, 0);
>  	/* backlight default off */
> -- 
> 1.7.7.6
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the barebox mailing list