Booting PhyTec PCM043/IMX35 from USB/SD-Card
sailingsmoky at googlemail.com
Thu May 31 15:13:07 EDT 2012
Am 31.05.2012 um 20:27 schrieb Sascha Hauer <s.hauer at pengutronix.de>:
> Hi Peter,
> On Fri, May 25, 2012 at 11:35:36AM +0200, Peter Kuennemann at Crane-Soft wrote:
>> To have kernel in flash and rootfs on MMC i tried bootargs as:
>> ... root=/dev/mmcblk0p1 rootfstype=ext2 rootflags=noatime rw noinitrd rootwait ..
>> and it boots the kernel properly from flash up to:
>> mmcblk0: mmc0:a95c SD01G 968 MiB <== Recognized the sd card
>> mmcblk0: p1 <== and partion 1
>> 1f00 256 mtdblock0 (driver?)
>> 1f01 128 mtdblock1 (driver?)
>> 1f02 2048 mtdblock2 (driver?)
>> 1f03 30336 mtdblock3 (driver?)
>> 1f04 1048576 mtdblock4 (driver?)
>> b300 992000 mmcblk0 driver: mmcblk
>> b301 991585 mmcblk0p1 <=== Something missing here?
>> No filesystem could mount root, tried: ext2 <===
>> Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,1) <===
>> The mmc does contain a ext2 filesystem with the proper rootfs copied from
>> the jffs2.image that I mounted under Ubuntu as loop device. The kernel has ext2 fs
>> support compiled in.
>> The rootfs on the mmc is properly accessible when booting kernel and flash footfs
>> on the very same platform.
> Has this been solved in the mean time? The above looks correct, I have
> no idea what's wrong.
I am sorry but this issue has not yet been resolved. I am currently out of office but will pick it up after my return. It may well be a Kernel configuration Problem.
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox