barebox, omap3530_beagle_xload and qemu-linaro

[Sascha Hauer]

On Sat, May 05, 2012 at 11:02:10PM +0200, Carlo Caione wrote:
> Hi,
> I was trying to run barebox (omap3530_beagle_xload) under qemu-linaro
> (-M beagle). This is what I get:
> 
> carlo at belfagor:~/projects/barebox-img$ qemu-system-arm -M beagle
> -nographic -sd sd.img
> qemu: fatal: Trying to execute code outside RAM or ROM at 0x00014080
> 
> R00=4020a5bf R01=4020a5bf R02=4020a5bf R03=4020a5bf
> R04=4020ae70 R05=4020a5bf R06=400001d3 R07=ffffffff
> R08=00000000 R09=ffffffff R10=00000000 R11=00000002
> R12=4020be7c R13=402064b0 R14=40205c8c R15=00014080
> PSR=200001db --C- A und32
> Aborted (core dumped)
> 
> Using the original linaro images (with u-boot inside) everything works
> well so I think the problem here is barebox.
> 
> Any idea?

Might be worth disassembling the code at r14=40205c88 which is probably
the code address which jumps to nirvana.

I haven't tried recently, but it should work on real hardware.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |