[PATCH 3/9] Minimal S5PV210 + Tiny210 support (2nd stage only)

Juergen Beisert jbe at pengutronix.de
Mon May 14 04:13:05 EDT 2012


Alexey Galakhov wrote:
> Signed-off-by: Alexey Galakhov <agalakhov at gmail.com>
> ---
>  arch/arm/Kconfig                                   |    6 +
>  arch/arm/Makefile                                  |    1 +
>  arch/arm/boards/tiny210/Makefile                   |    1 +
>  arch/arm/boards/tiny210/config.h                   |    1 +
>  arch/arm/boards/tiny210/lowlevel.c                 |   41 +
>  arch/arm/boards/tiny210/tiny210.c                  |  113 +++
>  arch/arm/mach-samsung/Kconfig                      |   24 +
>  arch/arm/mach-samsung/Makefile                     |    1 +
>  arch/arm/mach-samsung/clocks-s5pcxx.c              |   98 +++
>  arch/arm/mach-samsung/gpio-s5pcxx.c                |  123 +++
>  arch/arm/mach-samsung/include/mach/clocks-s5pcxx.h |   55 ++
>  arch/arm/mach-samsung/include/mach/gpio.h          |    3 +
>  arch/arm/mach-samsung/include/mach/iomap-s5pcxx.h  |   49 ++
>  arch/arm/mach-samsung/include/mach/iomux-s5pcxx.h  |  798 ++++++++++++++++++++
>  arch/arm/mach-samsung/include/mach/s3c-clocks.h    |    3 +
>  arch/arm/mach-samsung/include/mach/s3c-iomap.h     |    3 +
>  16 files changed, 1320 insertions(+)
>  create mode 100644 arch/arm/boards/tiny210/Makefile
>  create mode 100644 arch/arm/boards/tiny210/config.h
>  create mode 100644 arch/arm/boards/tiny210/lowlevel.c
>  create mode 100644 arch/arm/boards/tiny210/tiny210.c
>  create mode 100644 arch/arm/mach-samsung/clocks-s5pcxx.c
>  create mode 100644 arch/arm/mach-samsung/gpio-s5pcxx.c
>  create mode 100644 arch/arm/mach-samsung/include/mach/clocks-s5pcxx.h
>  create mode 100644 arch/arm/mach-samsung/include/mach/iomap-s5pcxx.h
>  create mode 100644 arch/arm/mach-samsung/include/mach/iomux-s5pcxx.h
> [...]

This patch series reflects your development steps (2nd stage first, then
native boot support). But this is not useful when including the results into
the Barebox repository.

For example you should add your new platform at the end of this patch series
after all the required preparations are done to make it work.

jbe

-- 
Pengutronix e.K.                              | Juergen Beisert             |
Linux Solutions for Science and Industry      | http://www.pengutronix.de/  |



More information about the barebox mailing list