improved complete support: the list of available variable name completions is dubbed

[Jean-Christophe PLAGNIOL-VILLARD]

On 09:17 Thu 03 May     , Sascha Hauer wrote:
> On Thu, May 03, 2012 at 09:03:01AM +0200, Eric Bénard wrote:
> > Hi Jean-Christophe,
> > 
> > Le Thu, 3 May 2012 07:07:27 +0200,
> > Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com> a écrit :
> > 
> > > On 21:37 Wed 02 May     , Antony Pavlov wrote:
> > > > Hi, All!
> > > > 
> > > > I have tested improved complete support in barebox.
> > > > 
> > > > I have found that the list of available variable name completions is
> > > > dubbed, e.g.
> > > I just test it again on malta
> > > 
> > > # qemu-system-mips64 -nodefaults -M malta -m 256 -nographic -serial stdio -monitor null -bios build/malta-64/barebox.bin 
> > > 
> > > 
> > > barebox 2012.04.0-00049-ga88907a #0 Thu May 3 12:43:17 CST 2012
> > > 
> > > 
> > > Board: qemu malta
> > > registered netconsole as cs1
> > > ## Unknown FLASH on Bank at 0x1e000000 - Size = 0x00000000 = 0 MB
> > > Malloc space: 0xa0400000 -> 0xa07fffff (size  4 MB)
> > > Open /dev/env0 No such file or directory
> > > running /env/bin/init...
> > > not found
> > > barebox:/ echo $
> > > $net.nameserver     $net.domainname     $cs0.baudrate 
> > > $cs0.active         $cs1.active         $cs1.ip 
> > > $cs1.port           $net.nameserver     $net.domainname 
> > > $cs0.baudrate       $cs0.active         $cs1.active 
> > > $cs1.ip             $cs1.port           
> > > barebox:/ echo $
> > > $net.nameserver     $net.domainname     $cs0.baudrate 
> > > $cs0.active         $cs1.active         $cs1.ip 
> > > $cs1.port           $net.nameserver     $net.domainname 
> > > $cs0.baudrate       $cs0.active         $cs1.active 
> > > $cs1.ip             $cs1.port           
> > > barebox:/ echo $
> > > $net.nameserver     $net.domainname     $cs0.baudrate 
> >   ^1
> > > $cs0.active         $cs1.active         $cs1.ip 
> >   ^1
> > > $cs1.port           $net.nameserver     $net.domainname 
> >   ^1                  ^2
> > > $cs0.baudrate       $cs0.active         $cs1.active 
> >                       ^2
> > > $cs1.ip             $cs1.port           
> >                       ^2
> >  
> > and you ge the same result as Antony : variables are present twice.
> 
> Same here.
I found a wway to reproduct it

Best Regards,
J.