[PATCH 8/8] arm: mxs: add write support for ocotp
Wolfram Sang
w.sang at pengutronix.de
Tue May 8 03:54:01 EDT 2012
Since we now can change HCLK and VDDIO, we can now support writing to
OCOTP. Writing is done via a special data register. This is u32, so we
need to fill a temporary buffer when offset or count is not aligned. The
write is also protected by a special device variable.
Signed-off-by: Wolfram Sang <w.sang at pengutronix.de>
---
arch/arm/mach-mxs/Kconfig | 11 +++++
arch/arm/mach-mxs/ocotp.c | 110 +++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 121 insertions(+)
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 3348a3c..f646e0b 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -80,6 +80,17 @@ config MXS_OCOTP
internal view). Don't use register offsets here, the SET, CLR and
TGL registers are not mapped!
+config MXS_OCOTP_WRITABLE
+ bool "OCOTP write support"
+ depends on MXS_OCOTP
+ help
+ Enable this option to add writing to OCOTP.
+ Warning: blown bits can not be unblown. Use with care.
+
+ Before being actually able to blow the bits, you need to explicitely
+ enable writing:
+ ocotp0.permanent_write_enable=1
+
endmenu
menu "Board specific settings "
diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c
index f18d066..df409ca 100644
--- a/arch/arm/mach-mxs/ocotp.c
+++ b/arch/arm/mach-mxs/ocotp.c
@@ -25,13 +25,19 @@
#include <mach/generic.h>
#include <mach/ocotp.h>
#include <mach/imx-regs.h>
+#include <mach/clock-imx28.h>
+#include <mach/power.h>
#define DRIVERNAME "ocotp"
#define OCOTP_CTRL 0x0
+# define OCOTP_CTRL_ADDR_MASK 0x3f
# define OCOTP_CTRL_BUSY (1 << 8)
# define OCOTP_CTRL_ERROR (1 << 9)
# define OCOTP_CTRL_RD_BANK_OPEN (1 << 12)
+# define OCOTP_CTRL_WR_UNLOCK 0x3e770000
+
+#define OCOTP_DATA 0x10
#define OCOTP_WORD_OFFSET 0x20
@@ -92,11 +98,105 @@ static ssize_t mxs_ocotp_cdev_read(struct cdev *cdev, void *buf, size_t count,
return size;
}
+static ssize_t mxs_ocotp_cdev_write(struct cdev *cdev, const void *buf, size_t count,
+ ulong offset, ulong flags)
+{
+ struct ocotp_priv *priv = cdev->priv;
+ void __iomem *base = priv->base;
+ const char *write_param;
+ unsigned int write_enabled = 0;
+ unsigned long old_hclk, aligned_offset;
+ int old_vddio, num_words, num_bytes, i, ret = 0;
+ u8 *work_buf;
+ u32 reg;
+
+ write_param = dev_get_param(cdev->dev, "permanent_write_enable");
+ if (write_param)
+ write_enabled = simple_strtoul(write_param, NULL, 0);
+
+ if (!write_param || !write_enabled)
+ return -EPERM;
+
+ /* we can only work on u32, so calc some helpers */
+ aligned_offset = offset & ~3UL;
+ num_words = DIV_ROUND_UP(offset - aligned_offset + count, 4);
+ num_bytes = num_words << 2;
+
+ /* read in all words which will be modified */
+ work_buf = xmalloc(num_bytes);
+
+ i = mxs_ocotp_cdev_read(cdev, work_buf, num_bytes, aligned_offset, 0);
+ if (i != num_bytes) {
+ ret = -ENXIO;
+ goto free_mem;
+ }
+
+ /* modify read words with to be written data */
+ for (i = 0; i < count; i++)
+ work_buf[offset - aligned_offset + i] |= ((u8 *)buf)[i];
+
+ /* prepare system for OTP write */
+ old_hclk = imx_get_hclk();
+ old_vddio = imx_get_vddio();
+
+ imx_set_hclk(24000000);
+ imx_set_vddio(2800000);
+
+ writel(OCOTP_CTRL_RD_BANK_OPEN, base + OCOTP_CTRL + BIT_CLR);
+
+ if (mxs_ocotp_wait_busy(priv)) {
+ ret = -ETIMEDOUT;
+ goto restore_system;
+ }
+
+ /* write word for word via data register */
+ for (i = 0; i < num_words; i++) {
+ reg = readl(base + OCOTP_CTRL) & ~OCOTP_CTRL_ADDR_MASK;
+ reg |= OCOTP_CTRL_WR_UNLOCK | ((aligned_offset >> 2) + i);
+ writel(reg, base + OCOTP_CTRL);
+
+ writel(((u32 *)work_buf)[i], base + OCOTP_DATA);
+
+ if (mxs_ocotp_wait_busy(priv)) {
+ ret = -ETIMEDOUT;
+ goto restore_system;
+ }
+
+ mdelay(2);
+ }
+
+restore_system:
+ imx_set_vddio(old_vddio);
+ imx_set_hclk(old_hclk);
+free_mem:
+ free(work_buf);
+
+ return ret;
+}
+
static struct file_operations mxs_ocotp_ops = {
.read = mxs_ocotp_cdev_read,
+ .write = mxs_ocotp_cdev_write,
.lseek = dev_lseek_default,
};
+#ifdef CONFIG_MXS_OCOTP_WRITABLE
+static int mxs_ocotp_write_enable_set(struct device_d *dev, struct param_d *param,
+ const char *val)
+{
+ unsigned long write_enable;
+
+ if (!val)
+ return -EINVAL;
+
+ write_enable = simple_strtoul(val, NULL, 0);
+ if (write_enable > 1)
+ return -EINVAL;
+
+ return dev_param_set_generic(dev, param, write_enable ? "1" : "0");
+}
+#endif /* CONFIG_MXS_OCOTP_WRITABLE */
+
static int mxs_ocotp_probe(struct device_d *dev)
{
int err;
@@ -113,6 +213,16 @@ static int mxs_ocotp_probe(struct device_d *dev)
if (err < 0)
return err;
+#ifdef CONFIG_MXS_OCOTP_WRITABLE
+ err = dev_add_param(dev, "permanent_write_enable",
+ mxs_ocotp_write_enable_set, NULL, 0);
+ if (err < 0)
+ return err;
+ err = dev_set_param(dev, "permanent_write_enable", "0");
+ if (err < 0)
+ return err;
+#endif /* CONFIG_MXS_OCOTP_WRITABLE */
+
return 0;
}
--
1.7.10
More information about the barebox
mailing list