[PATCH 5/7] S5P lowlevel clock init

Alexey Galakhov agalakhov at gmail.com
Tue May 15 09:20:38 EDT 2012


Signed-off-by: Alexey Galakhov <agalakhov at gmail.com>
---
 arch/arm/mach-samsung/Makefile                   |    1 +
 arch/arm/mach-samsung/include/mach/s3c-generic.h |    4 ++
 arch/arm/mach-samsung/lowlevel-s5pcxx.c          |   61 ++++++++++++++++++++++
 3 files changed, 66 insertions(+)
 create mode 100644 arch/arm/mach-samsung/lowlevel-s5pcxx.c

diff --git a/arch/arm/mach-samsung/Makefile b/arch/arm/mach-samsung/Makefile
index 0b95e14..d7344c8 100644
--- a/arch/arm/mach-samsung/Makefile
+++ b/arch/arm/mach-samsung/Makefile
@@ -1,5 +1,6 @@
 obj-y += s3c-timer.o generic.o
 obj-lowlevel-$(CONFIG_ARCH_S3C24xx) += lowlevel-s3c24x0.o
+obj-lowlevel-$(CONFIG_ARCH_S5PCxx) += lowlevel-s5pcxx.o
 obj-$(CONFIG_ARCH_S3C24xx) += gpio-s3c24x0.o s3c24xx-clocks.o mem-s3c24x0.o
 obj-$(CONFIG_ARCH_S5PCxx) += gpio-s5pcxx.o clocks-s5pcxx.o
 obj-$(CONFIG_S3C_LOWLEVEL_INIT) += $(obj-lowlevel-y)
diff --git a/arch/arm/mach-samsung/include/mach/s3c-generic.h b/arch/arm/mach-samsung/include/mach/s3c-generic.h
index 62d2c93..578aae1 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-generic.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-generic.h
@@ -38,3 +38,7 @@ uint32_t s3c_get_memory_size(void);
 #ifdef CONFIG_ARCH_S3C24xx
 void s3c24xx_disable_second_sdram_bank(void);
 #endif
+
+#ifdef CONFIG_ARCH_S5PCxx
+void s5p_init_pll(void);
+#endif
diff --git a/arch/arm/mach-samsung/lowlevel-s5pcxx.c b/arch/arm/mach-samsung/lowlevel-s5pcxx.c
new file mode 100644
index 0000000..15afa47
--- /dev/null
+++ b/arch/arm/mach-samsung/lowlevel-s5pcxx.c
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2012 Alexey Galakhov
+ *
+ * Based on code from u-boot found somewhere on the web
+ * that seems to originate from Samsung
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <io.h>
+#include <init.h>
+#include <mach/s3c-iomap.h>
+#include <mach/s3c-clocks.h>
+#include <mach/s3c-generic.h>
+
+#ifdef CONFIG_S3C_PLL_INIT
+void  __bare_init s5p_init_pll(void)
+{
+    uint32_t reg;
+    int i;
+
+    /* Set Mux to FIN */
+    writel(0, S5P_CLK_SRC0);
+
+    writel(BOARD_APLL_LOCKTIME, S5P_xPLL_LOCK + S5P_APLL);
+
+    /* Disable PLL */
+    writel(0, S5P_xPLL_CON + S5P_APLL);
+    writel(0, S5P_xPLL_CON + S5P_MPLL);
+
+    /* Set up dividers */
+    reg = readl(S5P_CLK_DIV0);
+    reg &= ~(BOARD_CLK_DIV0_MASK);
+    reg |= (BOARD_CLK_DIV0_VAL);
+    writel(reg, S5P_CLK_DIV0);
+
+    /* Set up PLLs */
+    writel(BOARD_APLL_VAL, S5P_xPLL_CON + S5P_APLL);
+    writel(BOARD_MPLL_VAL, S5P_xPLL_CON + S5P_MPLL);
+    writel(BOARD_EPLL_VAL, S5P_xPLL_CON + S5P_EPLL);
+    writel(BOARD_VPLL_VAL, S5P_xPLL_CON + S5P_VPLL);
+
+    /* Wait for sync */
+    for (i = 0; i < 0x10000; ++i)
+        barrier();
+
+    reg = readl(S5P_CLK_SRC0);
+    reg |= 0x1111; /* switch MUX to PLL outputs */
+    writel(reg, S5P_CLK_SRC0);
+}
+#endif /* CONFIG_S3C_PLL_INIT */
-- 
1.7.10




More information about the barebox mailing list