[PATCH V5 0/9] MPC85xx support

Sascha Hauer s.hauer at pengutronix.de
Mon May 21 03:03:41 EDT 2012

Hi Renaud,

On Thu, May 17, 2012 at 05:49:42PM +0100, Renaud Barbier wrote:
> This patchset splits the bigger patch [V4 2/4] to make it easier to read.
> It includes the base MPC85xx infrastructure required for a minimal
> boot target in 32 bit addressing mode using an e500v2 core.
> Also support is added for a minimal Freescale P2020RDB platform with
> driver support currently limited to NOR and serial port only.

There are still many cleanups possible, for example parts of traps.c
look suspiciously similar between mpc85xx and mpc52xx. With several
things in the early init code it's questionable whether this has to
be run that early or if we could do it later in regular initcalls.
However, I don't know much about powerpc and the mpc5200 support still
compiles, so I merged this series.


Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

More information about the barebox mailing list