April 2026 Archives by thread

Messages sorted by: [ subject ] [ author ] [ date ]
More info on this list...

Starting: Wed Apr 1 19:40:14 PDT 2026
Ending: Thu Apr 30 17:52:42 PDT 2026
Messages: 401

[PATCH v2 0/2] Add PWM support Amlogic S7 S7D S6 Xianwei Zhao via B4 Relay
- [PATCH v2 1/2] dt-bindings: pwm: amlogic: Add new bindings for S6 S7 S7D Xianwei Zhao via B4 Relay
- [PATCH v2 2/2] pwm: meson: Add support for Amlogic S7 Xianwei Zhao via B4 Relay
[DMARC error]Re: [PATCH 0/2] Add PWM support Amlogic S7 S7D S6 George Stark
[PATCH 0/8] Add VIM4 MCU/FAN support Ronald Claveau
- [PATCH 1/8] dt-bindings: mfd: khadas: Add new compatible for Khadas VIM4 MCU Ronald Claveau
- [PATCH 2/8] dt-bindings: i2c: amlogic: Add compatible for T7 SOC Ronald Claveau
- [PATCH 3/8] mfd: khadas-mcu: Add per-variant configuration infrastructure and VIM4 support Ronald Claveau
- [PATCH 4/8] mfd: khadas-mcu: Add support for VIM4 MCU variant Ronald Claveau
- [PATCH 5/8] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support Ronald Claveau
  - [PATCH 5/8] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support Neil Armstrong
    - [PATCH 5/8] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support Ronald Claveau
- [PATCH 6/8] arm64: dts: amlogic: t7: Add i2c pinctrl node Ronald Claveau
- [PATCH 7/8] arm64: dts: amlogic: t7: Add i2c controller node Ronald Claveau
- [PATCH 8/8] arm64: dts: amlogic: t7: khadas-vim4: Add i2c MCU fan node Ronald Claveau
[PATCH v2 0/8] Add VIM4 MCU/FAN support Ronald Claveau
- [PATCH v2 1/8] dt-bindings: mfd: khadas: Add new compatible for Khadas VIM4 MCU Ronald Claveau
  - [PATCH v2 1/8] dt-bindings: mfd: khadas: Add new compatible for Khadas VIM4 MCU Rob Herring
    - [PATCH v2 1/8] dt-bindings: mfd: khadas: Add new compatible for Khadas VIM4 MCU Ronald Claveau
    - [PATCH v2 1/8] dt-bindings: mfd: khadas: Add new compatible for Khadas VIM4 MCU Neil Armstrong
    - [PATCH v2 1/8] dt-bindings: mfd: khadas: Add new compatible for Khadas VIM4 MCU Ronald Claveau
- [PATCH v2 2/8] dt-bindings: i2c: amlogic: Add compatible for T7 SOC Ronald Claveau
  - [PATCH v2 2/8] dt-bindings: i2c: amlogic: Add compatible for T7 SOC Rob Herring (Arm)
- [PATCH v2 3/8] mfd: khadas-mcu: Add per-variant configuration infrastructure and VIM4 support Ronald Claveau
- [PATCH v2 4/8] mfd: khadas-mcu: Add support for VIM4 MCU variant Ronald Claveau
- [PATCH v2 5/8] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support Ronald Claveau
- [PATCH v2 6/8] arm64: dts: amlogic: t7: Add i2c pinctrl node Ronald Claveau
- [PATCH v2 7/8] arm64: dts: amlogic: t7: Add i2c controller node Ronald Claveau
- [PATCH v2 8/8] arm64: dts: amlogic: t7: khadas-vim4: Add i2c MCU fan node Ronald Claveau
(subset) [PATCH v3 0/3] Add the missing mpll3 clock and clock controller nodes Jerome Brunet
- (subset) [PATCH v3 0/3] Add the missing mpll3 clock and clock controller nodes Neil Armstrong
(subset) [PATCH 0/2] Fix Amlogic T7 null reset ops and DT required property Neil Armstrong
(subset) [PATCH v5 0/9] arm64: dts: amlogic: Add MMC/SD/SDIO support for Khadas VIM4 (Amlogic T7) Neil Armstrong
[PATCH] arm64: dts: meson-gxl-p230: fix ethernet PHY interrupt number Neil Armstrong
[PATCH 04/13] clk: amlogic: Add basic clock driver Chuan Liu
- [PATCH 04/13] clk: amlogic: Add basic clock driver Jerome Brunet
  - [PATCH 04/13] clk: amlogic: Add basic clock driver Chuan Liu
- [PATCH 04/13] clk: amlogic: Add basic clock driver Krzysztof Kozlowski
  - [PATCH 04/13] clk: amlogic: Add basic clock driver Chuan Liu
    - [PATCH 04/13] clk: amlogic: Add basic clock driver Krzysztof Kozlowski
[PATCH 01/13] dt-bindings: clock: Add Amlogic A9 standardized model clock control units Chuan Liu
[PATCH 06/13] clk: amlogic: Add noglitch clock driver Chuan Liu
[GIT PULL] amlogic ARM64 DT updates for v7.1 Neil Armstrong
- [GIT PULL] amlogic ARM64 DT updates for v7.1 Krzysztof Kozlowski
  - [GIT PULL] amlogic ARM64 DT updates for v7.1 Neil Armstrong
    - [GIT PULL] amlogic ARM64 DT updates for v7.1 Krzysztof Kozlowski
    - [GIT PULL] amlogic ARM64 DT updates for v7.1 Neil Armstrong
    - [GIT PULL] amlogic ARM64 DT updates for v7.1 Krzysztof Kozlowski
    - [GIT PULL] amlogic ARM64 DT updates for v7.1 Neil Armstrong
    - [GIT PULL] amlogic ARM64 DT updates for v7.1 Krzysztof Kozlowski
    - [GIT PULL] amlogic ARM64 DT updates for v7.1 Arnd Bergmann
    - [GIT PULL] amlogic ARM64 DT updates for v7.1 Neil Armstrong
    - [GIT PULL] amlogic ARM64 DT updates for v7.1 Arnd Bergmann
[PATCH 0/4] soc: amlogic: clk-measure: add A1 and T7 support Jian Hu
- [PATCH 1/4] dt-bindings: soc: amlogic: clk-measure: Add A1 and T7 compatible Jian Hu
- [PATCH 2/4] soc: amlogic: clk-measure: Add A1 and T7 support Jian Hu
  - [PATCH 2/4] soc: amlogic: clk-measure: Add A1 and T7 support Krzysztof Kozlowski
    - [PATCH 2/4] soc: amlogic: clk-measure: Add A1 and T7 support Jian Hu
    - [PATCH 2/4] soc: amlogic: clk-measure: Add A1 and T7 support Krzysztof Kozlowski
    - [PATCH 2/4] soc: amlogic: clk-measure: Add A1 and T7 support Neil Armstrong
    - [PATCH 2/4] soc: amlogic: clk-measure: Add A1 and T7 support Jian Hu
- [PATCH 3/4] arm64: dts: meson: a1: Add clk measure support Jian Hu
- [PATCH 4/4] arm64: dts: amlogic: t7: Add clk measure support Jian Hu
  - [PATCH 4/4] arm64: dts: amlogic: t7: Add clk measure support Ronald Claveau
[PATCH 0/8] arm64: amlogic: T7 thermal support Ronald Claveau
- [PATCH 6/8] arm64: dts: amlogic: t7: Add thermal sensor nodes Ronald Claveau
- [PATCH 8/8] arm64: dts: amlogic: t7: khadas-vim4: Add fan cooling to thermal zones Ronald Claveau
[PATCH 1/8] dt-bindings: thermal: amlogic: Add support for T7 Ronald Claveau
- [PATCH 1/8] dt-bindings: thermal: amlogic: Add support for T7 Krzysztof Kozlowski
  - [PATCH 1/8] dt-bindings: thermal: amlogic: Add support for T7 Ronald Claveau
[PATCH 2/8] firmware: meson: sm: Thermal calibration read via secure monitor Ronald Claveau
[PATCH 3/8] firmware: meson: sm: Add thermal calibration SMC call Ronald Claveau
- [PATCH 3/8] firmware: meson: sm: Add thermal calibration SMC call Krzysztof Kozlowski
  - [PATCH 3/8] firmware: meson: sm: Add thermal calibration SMC call Ronald Claveau
[PATCH 4/8] thermal: amlogic: Add support for secure monitor calibration readout Ronald Claveau
[PATCH 5/8] arm64: dts: amlogic: t7: Add cooling cells to all CPUs Ronald Claveau
[PATCH 7/8] arm64: dts: amlogic: t7: Add thermal zones Ronald Claveau
[PATCH RFC v2 00/11] Add support for AUDIN driver in Amlogic GXBB Valerio Setti
- [PATCH RFC v2 01/11] ASoC: meson: gx: add gx-formatter and gx-interface Valerio Setti
  - [PATCH RFC v2 01/11] ASoC: meson: gx: add gx-formatter and gx-interface Mark Brown
- [PATCH RFC v2 02/11] ASoC: meson: aiu-encoder-i2s: use gx_iface and gx_stream structures Valerio Setti
  - [PATCH RFC v2 02/11] ASoC: meson: aiu-encoder-i2s: use gx_iface and gx_stream structures Mark Brown
    - [PATCH RFC v2 02/11] ASoC: meson: aiu-encoder-i2s: use gx_iface and gx_stream structures Jerome Brunet
    - [PATCH RFC v2 02/11] ASoC: meson: aiu-encoder-i2s: use gx_iface and gx_stream structures Mark Brown
    - [PATCH RFC v2 02/11] ASoC: meson: aiu-encoder-i2s: use gx_iface and gx_stream structures Valerio Setti
- [PATCH RFC v2 03/11] ASoC: meson: aiu: introduce I2S output formatter Valerio Setti
- [PATCH RFC v2 04/11] ASoC: meson: aiu: use aiu-formatter-i2s to format I2S output data Valerio Setti
- [PATCH RFC v2 05/11] ASoC: dt-bindings: amlogic: add schema for audin-formatter and audin-toddr Valerio Setti
  - [PATCH RFC v2 05/11] ASoC: dt-bindings: amlogic: add schema for audin-formatter and audin-toddr Krzysztof Kozlowski
    - [PATCH RFC v2 05/11] ASoC: dt-bindings: amlogic: add schema for audin-formatter and audin-toddr Valerio Setti
    - [PATCH RFC v2 05/11] ASoC: dt-bindings: amlogic: add schema for audin-formatter and audin-toddr Krzysztof Kozlowski
    - [PATCH RFC v2 05/11] ASoC: dt-bindings: amlogic: add schema for audin-formatter and audin-toddr Jerome Brunet
    - [PATCH RFC v2 05/11] ASoC: dt-bindings: amlogic: add schema for audin-formatter and audin-toddr Krzysztof Kozlowski
    - [PATCH RFC v2 05/11] ASoC: dt-bindings: amlogic: add schema for audin-formatter and audin-toddr Valerio Setti
- [PATCH RFC v2 06/11] ASoC: meson: gx: add AUDIN I2S Decoder driver Valerio Setti
- [PATCH RFC v2 07/11] ASoC: meson: gx: add AUDIN FIFO driver Valerio Setti
- [PATCH RFC v2 08/11] ASoC: meson: aiu: add I2S Capture DAI Valerio Setti
- [PATCH RFC v2 09/11] ASoC: meson: gx-card: add support for AUDIN FIFO Valerio Setti
- [PATCH RFC v2 10/11] arm64: dts: amlogic: gx: add nodes for AUDIN decoder and FIFO Valerio Setti
- [PATCH RFC v2 11/11] arm64: dts: amlogic: odroid-c2: add support for I2S audio input Valerio Setti
- [PATCH RFC v2 00/11] Add support for AUDIN driver in Amlogic GXBB Jerome Brunet
  - [PATCH RFC v2 00/11] Add support for AUDIN driver in Amlogic GXBB Krzysztof Kozlowski
[PATCH v2 0/8] arm64: amlogic: T7 thermal support Ronald Claveau
- [PATCH v2 1/8] dt-bindings: thermal: amlogic: Add support for T7 Ronald Claveau
  - [PATCH v2 1/8] dt-bindings: thermal: amlogic: Add support for T7 Conor Dooley
    - [PATCH v2 1/8] dt-bindings: thermal: amlogic: Add support for T7 Ronald Claveau
- [PATCH v2 3/8] firmware: meson: sm: Add thermal calibration SMC call Ronald Claveau
- [PATCH v2 4/8] thermal: amlogic: Add support for secure monitor calibration readout Ronald Claveau
- [PATCH v2 5/8] arm64: dts: amlogic: t7: Add cooling cells to all CPUs Ronald Claveau
- [PATCH v2 6/8] arm64: dts: amlogic: t7: Add thermal sensor nodes Ronald Claveau
- [PATCH v2 7/8] arm64: dts: amlogic: t7: Add thermal zones Ronald Claveau
- [PATCH v2 8/8] arm64: dts: amlogic: t7: khadas-vim4: Add fan cooling to thermal zones Ronald Claveau
[PATCH v2 2/8] firmware: meson: sm: Thermal calibration read via secure monitor Ronald Claveau
[PATCH v2 0/4] soc: amlogic: clk-measure: add A1 and T7 support Jian Hu via B4 Relay
- [PATCH v2 2/4] soc: amlogic: clk-measure: Add A1 and T7 support Jian Hu via B4 Relay
  - [PATCH v2 2/4] soc: amlogic: clk-measure: Add A1 and T7 support Neil Armstrong
- [PATCH v2 4/4] arm64: dts: amlogic: t7: Add clk measure support Jian Hu via B4 Relay
  - [PATCH v2 4/4] arm64: dts: amlogic: t7: Add clk measure support Ronald Claveau
    - [PATCH v2 4/4] arm64: dts: amlogic: t7: Add clk measure support Jian Hu
    - [PATCH v2 4/4] arm64: dts: amlogic: t7: Add clk measure support Neil Armstrong
    - [PATCH v2 4/4] arm64: dts: amlogic: t7: Add clk measure support Jian Hu
    - [PATCH v2 4/4] arm64: dts: amlogic: t7: Add clk measure support Ronald Claveau
[PATCH v2 1/4] dt-bindings: soc: amlogic: clk-measure: Add A1 and T7 compatible Jian Hu via B4 Relay
- [PATCH v2 1/4] dt-bindings: soc: amlogic: clk-measure: Add A1 and T7 compatible Conor Dooley
[PATCH v2 3/4] arm64: dts: meson: a1: Add clk measure support Jian Hu via B4 Relay
- [PATCH v2 3/4] arm64: dts: meson: a1: Add clk measure support Neil Armstrong
[PATCH 0/3] arm64: dts: amlogic: t7: Add UART support and enable Bluetooth on VIM4 Ronald Claveau
- [PATCH 3/3] arm64: dts: amlogic: t7: khadas-vim4: Enable Bluetooth Ronald Claveau
[PATCH 1/3] arm64: dts: amlogic: t7: Add uart_c pinctrl pins group Ronald Claveau
- [PATCH 1/3] arm64: dts: amlogic: t7: Add uart_c pinctrl pins group Xianwei Zhao
  - [PATCH 1/3] arm64: dts: amlogic: t7: Add uart_c pinctrl pins group Ronald Claveau
[PATCH 2/3] arm64: dts: amlogic: t7: Add UART controllers nodes Ronald Claveau
- [PATCH 2/3] arm64: dts: amlogic: t7: Add UART controllers nodes Xianwei Zhao
  - [PATCH 2/3] arm64: dts: amlogic: t7: Add UART controllers nodes Ronald Claveau
[PATCH 0/6] drm: handle IRQ_HPD events correctly Dmitry Baryshkov
- [PATCH 1/6] drm/connector: report IRQ_HPD events to drm_connector_oob_hotplug_event() Dmitry Baryshkov
  - [PATCH 1/6] drm/connector: report IRQ_HPD events to drm_connector_oob_hotplug_event() Tomi Valkeinen
    - [PATCH 1/6] drm/connector: report IRQ_HPD events to drm_connector_oob_hotplug_event() Dmitry Baryshkov
    - [PATCH 1/6] drm/connector: report IRQ_HPD events to drm_connector_oob_hotplug_event() Tomi Valkeinen
    - [PATCH 1/6] drm/connector: report IRQ_HPD events to drm_connector_oob_hotplug_event() Dmitry Baryshkov
    - [PATCH 1/6] drm/connector: report IRQ_HPD events to drm_connector_oob_hotplug_event() Tomi Valkeinen
    - [PATCH 1/6] drm/connector: report IRQ_HPD events to drm_connector_oob_hotplug_event() Dmitry Baryshkov
    - [PATCH 1/6] drm/connector: report IRQ_HPD events to drm_connector_oob_hotplug_event() Tomi Valkeinen
    - [PATCH 1/6] drm/connector: report IRQ_HPD events to drm_connector_oob_hotplug_event() Dmitry Baryshkov
- [PATCH 2/6] drm/bridge: pass down IRQ_HPD to the drivers Dmitry Baryshkov
- [PATCH 3/6] drm/bridge: aux-hpd: let drivers pass IRQ_HPD events Dmitry Baryshkov
- [PATCH 4/6] drm/msm: dp: handle the IRQ_HPD events reported by USB-C Dmitry Baryshkov
- [PATCH 5/6] soc: qcom: pmic-glink-altmode: pass down HPD_IRQ events Dmitry Baryshkov
- [PATCH 6/6] usb: typec: ucsi: huawei-gaokun: pass down HPD_IRQ events Dmitry Baryshkov
  - [PATCH 6/6] usb: typec: ucsi: huawei-gaokun: pass down HPD_IRQ events Heikki Krogerus
  - [PATCH 6/6] usb: typec: ucsi: huawei-gaokun: pass down HPD_IRQ events Pengyu Luo
[PATCH v2 0/3] arm64: dts: amlogic: t7: Add UART support and enable Bluetooth on VIM4 Ronald Claveau
[PATCH v2 1/3] arm64: dts: amlogic: t7: Add uart_c pinctrl pins group Ronald Claveau
- [PATCH v2 1/3] arm64: dts: amlogic: t7: Add uart_c pinctrl pins group Neil Armstrong
[PATCH v2 2/3] arm64: dts: amlogic: t7: Add UART controllers nodes Ronald Claveau
- [PATCH v2 2/3] arm64: dts: amlogic: t7: Add UART controllers nodes Neil Armstrong
[PATCH v2 3/3] arm64: dts: amlogic: t7: khadas-vim4: Enable Bluetooth Ronald Claveau
- [PATCH v2 3/3] arm64: dts: amlogic: t7: khadas-vim4: Enable Bluetooth Neil Armstrong
  - [PATCH v2 3/3] arm64: dts: amlogic: t7: khadas-vim4: Enable Bluetooth Ronald Claveau
[PATCH v3 0/8] Add VIM4 MCU/FAN support Ronald Claveau
- [PATCH v3 2/8] dt-bindings: i2c: amlogic: Add compatible for T7 SOC Ronald Claveau
- [PATCH v3 3/8] mfd: khadas-mcu: Add per-variant configuration infrastructure and VIM4 support Ronald Claveau
- [PATCH v3 4/8] mfd: khadas-mcu: Add support for VIM4 MCU variant Ronald Claveau
- [PATCH v3 5/8] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support Ronald Claveau
- [PATCH v3 6/8] arm64: dts: amlogic: t7: Add i2c pinctrl node Ronald Claveau
- [PATCH v3 7/8] arm64: dts: amlogic: t7: Add i2c controller node Ronald Claveau
- [PATCH v3 8/8] arm64: dts: amlogic: t7: khadas-vim4: Add i2c MCU fan node Ronald Claveau
[PATCH v3 1/8] dt-bindings: mfd: khadas: Add new compatible for Khadas VIM4 MCU Ronald Claveau
- [PATCH v3 1/8] dt-bindings: mfd: khadas: Add new compatible for Khadas VIM4 MCU Conor Dooley
  - [PATCH v3 1/8] dt-bindings: mfd: khadas: Add new compatible for Khadas VIM4 MCU Ronald Claveau
[PATCH] arm64: dts: amlogic: add support for Amedia X98Q christian.koever-draxl at student.uibk.ac.at
- [PATCH] arm64: dts: amlogic: add support for Amedia X98Q Ferass El Hafidi
  - [PATCH] arm64: dts: amlogic: add support for Amedia X98Q Christian Stefan Köver-Draxl
- [PATCH] arm64: dts: amlogic: add support for Amedia X98Q Ferass El Hafidi
[PATCH v1 10/14] thermal/of: Rename the devm_thermal_of_cooling_device_register() function Daniel Lezcano
[PATCH v2 0/2] Add support for Amediatech X98Q (Amlogic S905W2) christian.koever-draxl at student.uibk.ac.at
- [PATCH v2 1/2] dt-bindings: arm: amlogic: add X98Q compatible christian.koever-draxl at student.uibk.ac.at
  - [PATCH v2 1/2] dt-bindings: arm: amlogic: add X98Q compatible Conor Dooley
- [PATCH v2 2/2] arm64: dts: amlogic: add support for X98Q christian.koever-draxl at student.uibk.ac.at
  - [PATCH v2 2/2] arm64: dts: amlogic: add support for X98Q Ferass El Hafidi
  - [PATCH v2 2/2] arm64: dts: amlogic: add support for X98Q Krzysztof Kozlowski
- [PATCH v2 0/2] Add support for Amediatech X98Q (Amlogic S905W2) Ferass El Hafidi
[PATCH v3 0/4] arm64: dts: amlogic: t7: Add UART support and enable Bluetooth on VIM4 Ronald Claveau
- [PATCH v3 3/4] arm64: dts: amlogic: t7: khadas-vim4: Remove redundant clocks from UART A Ronald Claveau
  - [PATCH v3 3/4] arm64: dts: amlogic: t7: khadas-vim4: Remove redundant clocks from UART A Neil Armstrong
- [PATCH v3 4/4] arm64: dts: amlogic: t7: khadas-vim4: Enable Bluetooth Ronald Claveau
[PATCH v3 1/4] arm64: dts: amlogic: t7: Add uart_c pinctrl pins group Ronald Claveau
[PATCH v3 2/4] arm64: dts: amlogic: t7: Add UART controllers nodes Ronald Claveau
- [PATCH v3 2/4] arm64: dts: amlogic: t7: Add UART controllers nodes Neil Armstrong
[PATCH v4 0/4] arm64: dts: amlogic: t7: Add UART support and enable Bluetooth on VIM4 Ronald Claveau
- [PATCH v4 4/4] arm64: dts: amlogic: t7: khadas-vim4: Enable Bluetooth Ronald Claveau
  - [PATCH v4 4/4] arm64: dts: amlogic: t7: khadas-vim4: Enable Bluetooth Neil Armstrong
[PATCH v4 1/4] arm64: dts: amlogic: t7: Add uart_c pinctrl pins group Ronald Claveau
[PATCH v4 2/4] arm64: dts: amlogic: t7: Add UART controllers nodes Ronald Claveau
[PATCH v4 3/4] arm64: dts: amlogic: t7: khadas-vim4: Remove redundant clocks from UART A Ronald Claveau
[PATCH v2 0/6] drm: handle IRQ_HPD events correctly Dmitry Baryshkov
- [PATCH v2 1/6] drm/connector: report IRQ_HPD events to drm_connector_oob_hotplug_event() Dmitry Baryshkov
- [PATCH v2 2/6] drm/bridge: pass down IRQ_HPD to the drivers Dmitry Baryshkov
- [PATCH v2 3/6] drm/bridge: aux-hpd: let drivers pass IRQ_HPD events Dmitry Baryshkov
- [PATCH v2 4/6] drm/msm: dp: handle the IRQ_HPD events reported by USB-C Dmitry Baryshkov
- [PATCH v2 5/6] soc: qcom: pmic-glink-altmode: pass down HPD_IRQ events Dmitry Baryshkov
- [PATCH v2 6/6] usb: typec: ucsi: huawei-gaokun: pass down HPD_IRQ events Dmitry Baryshkov
[PATCH v3 0/6] drm: handle IRQ_HPD events correctly Dmitry Baryshkov
- [PATCH v3 1/6] drm/connector: report IRQ_HPD events to drm_connector_oob_hotplug_event() Dmitry Baryshkov
- [PATCH v3 2/6] drm/bridge: pass down IRQ_HPD to the drivers Dmitry Baryshkov
- [PATCH v3 3/6] drm/bridge: aux-hpd: let drivers pass IRQ_HPD events Dmitry Baryshkov
- [PATCH v3 4/6] drm/msm: dp: handle the IRQ_HPD events reported by USB-C Dmitry Baryshkov
- [PATCH v3 5/6] soc: qcom: pmic-glink-altmode: pass down HPD_IRQ events Dmitry Baryshkov
  - [PATCH v3 5/6] soc: qcom: pmic-glink-altmode: pass down HPD_IRQ events Konrad Dybcio
- [PATCH v3 6/6] usb: typec: ucsi: huawei-gaokun: pass down HPD_IRQ events Dmitry Baryshkov
[PATCH v3 0/8] arm64: amlogic: T7 thermal support Ronald Claveau
- [PATCH v3 5/8] arm64: dts: amlogic: t7: Add cooling cells to all CPUs Ronald Claveau
- [PATCH v3 6/8] arm64: dts: amlogic: t7: Add thermal sensor nodes Ronald Claveau
- [PATCH v3 7/8] arm64: dts: amlogic: t7: Add thermal zones Ronald Claveau
- [PATCH v3 8/8] arm64: dts: amlogic: t7: khadas-vim4: Add fan cooling to thermal zones Ronald Claveau
[PATCH v3 1/8] dt-bindings: thermal: amlogic: Add support for T7 Ronald Claveau
- [PATCH v3 1/8] dt-bindings: thermal: amlogic: Add support for T7 Conor Dooley
[PATCH v3 2/8] firmware: meson: sm: Thermal calibration read via secure monitor Ronald Claveau
[PATCH v3 3/8] firmware: meson: sm: Add thermal calibration SMC call Ronald Claveau
[PATCH v3 4/8] thermal: amlogic: Add support for secure monitor calibration readout Ronald Claveau
- [PATCH v3 4/8] thermal: amlogic: Add support for secure monitor calibration readout Daniel Lezcano
  - [PATCH v3 4/8] thermal: amlogic: Add support for secure monitor calibration readout Ronald Claveau
    - [PATCH v3 4/8] thermal: amlogic: Add support for secure monitor calibration readout Daniel Lezcano
    - [PATCH v3 4/8] thermal: amlogic: Add support for secure monitor calibration readout Ronald Claveau
[PATCH v3 0/4] soc: amlogic: clk-measure: add A1 and T7 support Jian Hu via B4 Relay
- [PATCH v3 2/4] soc: amlogic: clk-measure: Add A1 and T7 support Jian Hu via B4 Relay
[PATCH v3 1/4] dt-bindings: soc: amlogic: clk-measure: Add A1 and T7 compatible Jian Hu via B4 Relay
[PATCH v3 3/4] arm64: dts: meson: a1: Add clk measure support Jian Hu via B4 Relay
[PATCH v3 4/4] arm64: dts: amlogic: t7: Add clk measure support Jian Hu via B4 Relay
- [PATCH v3 4/4] arm64: dts: amlogic: t7: Add clk measure support Neil Armstrong
[PATCH v4 0/8] Add VIM4 MCU/FAN support Ronald Claveau via B4 Relay
- [PATCH v4 1/8] dt-bindings: mfd: khadas: Add new compatible for Khadas VIM4 MCU Ronald Claveau via B4 Relay
  - [PATCH v4 1/8] dt-bindings: mfd: khadas: Add new compatible for Khadas VIM4 MCU Conor Dooley
- [PATCH v4 2/8] dt-bindings: i2c: amlogic: Add compatible for T7 SOC Ronald Claveau via B4 Relay
- [PATCH v4 3/8] mfd: khadas-mcu: Add per-variant configuration infrastructure and VIM4 support Ronald Claveau via B4 Relay
  - [PATCH v4 3/8] mfd: khadas-mcu: Add per-variant configuration infrastructure and VIM4 support Neil Armstrong
- [PATCH v4 4/8] mfd: khadas-mcu: Add support for VIM4 MCU variant Ronald Claveau via B4 Relay
  - [PATCH v4 4/8] mfd: khadas-mcu: Add support for VIM4 MCU variant Neil Armstrong
- [PATCH v4 5/8] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support Ronald Claveau via B4 Relay
  - [PATCH v4 5/8] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support Neil Armstrong
    - [PATCH v4 5/8] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support linux-kernel-dev at aliel.fr
- [PATCH v4 6/8] arm64: dts: amlogic: t7: Add i2c pinctrl node Ronald Claveau via B4 Relay
  - [PATCH v4 6/8] arm64: dts: amlogic: t7: Add i2c pinctrl node Neil Armstrong
- [PATCH v4 7/8] arm64: dts: amlogic: t7: Add i2c controller node Ronald Claveau via B4 Relay
  - [PATCH v4 7/8] arm64: dts: amlogic: t7: Add i2c controller node Neil Armstrong
- [PATCH v4 8/8] arm64: dts: amlogic: t7: khadas-vim4: Add i2c MCU fan node Ronald Claveau via B4 Relay
  - [PATCH v4 8/8] arm64: dts: amlogic: t7: khadas-vim4: Add i2c MCU fan node Neil Armstrong
[GIT PULL] amlogic ARM64 DT fixes for v7.1-rc Neil Armstrong
[PATCH v3 0/2] Add support for Amediatech X98Q (Amlogic S905W2) christian.koever-draxl at student.uibk.ac.at
- [PATCH v3 1/2] dt-bindings: arm: amlogic: add support for Amediatech X98Q christian.koever-draxl at student.uibk.ac.at
  - [PATCH v3 1/2] dt-bindings: arm: amlogic: add support for Amediatech X98Q Conor Dooley
- [PATCH v3 2/2] arm64: dts: amlogic: add support for X98Q christian.koever-draxl at student.uibk.ac.at
  - [PATCH v3 2/2] arm64: dts: amlogic: add support for X98Q Ferass El Hafidi
- [PATCH v3 0/2] Add support for Amediatech X98Q (Amlogic S905W2) Ferass El Hafidi
[PATCH v4 0/2] Add support for Amediatech X98Q (Amlogic S905W2) christian.koever-draxl at student.uibk.ac.at
- [PATCH v4 2/2] arm64: dts: amlogic: add support for Amediatech X98Q christian.koever-draxl at student.uibk.ac.at
  - [PATCH v4 2/2] arm64: dts: amlogic: add support for Amediatech X98Q Ferass El Hafidi
  - [PATCH v4 2/2] arm64: dts: amlogic: add support for Amediatech X98Q Christian Hewitt
[PATCH v4 1/2] dt-bindings: arm: amlogic: add support for Amediatech X98Q christian.koever-draxl at student.uibk.ac.at
[PATCH] pinctrl: meson: amlogic-a4: fix deadlock issue Xianwei Zhao via B4 Relay
- [PATCH] pinctrl: meson: amlogic-a4: fix deadlock issue Neil Armstrong
- [PATCH] pinctrl: meson: amlogic-a4: fix deadlock issue Linus Walleij
[PATCH v2 08/12] thermal/of: Rename the devm_thermal_of_cooling_device_register() function Daniel Lezcano
[PATCH v2 00/41] drm/display: bridge-connector: attach encoder to the connector Luca Ceresoli
- [PATCH v2 01/41] drm/display: bridge-connector: attach the encoder to the created connector Luca Ceresoli
- [PATCH v2 02/41] drm: adp: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 03/41] drm/bridge: adv7511: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 04/41] drm/bridge: ite-it6263: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
  - [PATCH v2 04/41] drm/bridge: ite-it6263: remove now-redundant call to drm_connector_attach_encoder() Liu Ying
- [PATCH v2 05/41] drm/bridge: ti-sn65dsi86: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 06/41] drm/imx/dcss: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
  - [PATCH v2 06/41] drm/imx/dcss: remove now-redundant call to drm_connector_attach_encoder() Laurentiu Palcu
- [PATCH v2 07/41] drm/imx: ldb: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 08/41] drm/imx: parallel-display: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 09/41] drm/imx/lcdc: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 10/41] drm/ingenic: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
  - [PATCH v2 10/41] drm/ingenic: remove now-redundant call to drm_connector_attach_encoder() Paul Cercueil
- [PATCH v2 11/41] drm/kmb/dsi: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 12/41] drm/mediatek: mtk_dpi: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 13/41] drm/mediatek: mtk_dsi: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 14/41] drm/meson: encoder_cvbs: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 15/41] drm/meson: encoder_hdmi: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 16/41] drm/msm/dp: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 17/41] drm/msm/hdmi: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 18/41] drm/omapdrm: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 19/41] rm/rockchip: cdn-dp: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
  - [PATCH v2 19/41] rm/rockchip: cdn-dp: remove now-redundant call to drm_connector_attach_encoder() Dmitry Baryshkov
- [PATCH v2 20/41] drm/rockchip: rk3066_hdmi: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 21/41] drm/tegra: hdmi: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 22/41] drm/tegra: rgb: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 23/41] drm/tests: bridge: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 24/41] drm: verisilicon: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
  - [PATCH v2 24/41] drm: verisilicon: remove now-redundant call to drm_connector_attach_encoder() Icenowy Zheng
  - [PATCH v2 24/41] drm: verisilicon: remove now-redundant call to drm_connector_attach_encoder() Icenowy Zheng
- [PATCH v2 25/41] drm/exynos: exynos_dp: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 26/41] drm: rcar-du: encoder: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 27/41] drm: renesas: rz-du: rzg2l_du_encoder: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
  - [PATCH v2 27/41] drm: renesas: rz-du: rzg2l_du_encoder: remove now-redundant call to drm_connector_attach_encoder() Biju Das
- [PATCH v2 28/41] drm/rockchip: analogix_dp: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 29/41] drm/rockchip: dw_dp: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 30/41] drm/rockchip: dw_hdmi_qp: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 31/41] drm/rockchip: inno-hdmi: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 32/41] drm/msm/mdp4: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 33/41] drm/msm/dsi: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 34/41] drm/mxsfb/lcdif: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
  - [PATCH v2 34/41] drm/mxsfb/lcdif: remove now-redundant call to drm_connector_attach_encoder() Liu Ying
- [PATCH 35/41] drm/rockchip: lvds: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
  - [PATCH 35/41] drm/rockchip: lvds: remove now-redundant call to drm_connector_attach_encoder() Dmitry Baryshkov
    - [PATCH 35/41] drm/rockchip: lvds: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 35/41] drm/rockchip: lvds: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 36/41] drm/tidss: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 37/41] drm/tilcdc: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 38/41] drm: zynqmp_kms: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 39/41] drm/imx: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
  - [PATCH v2 39/41] drm/imx: remove now-redundant call to drm_connector_attach_encoder() Liu Ying
- [PATCH v2 40/41] drm/rockchip: rgb: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
- [PATCH v2 41/41] drm: renesas: shmobile: remove now-redundant call to drm_connector_attach_encoder() Luca Ceresoli
  - [PATCH v2 41/41] drm: renesas: shmobile: remove now-redundant call to drm_connector_attach_encoder() Dmitry Baryshkov
  - [PATCH v2 41/41] drm: renesas: shmobile: remove now-redundant call to drm_connector_attach_encoder() Geert Uytterhoeven
- [PATCH v2 00/41] drm/display: bridge-connector: attach encoder to the connector Dmitry Baryshkov
  - [PATCH v2 00/41] drm/display: bridge-connector: attach encoder to the connector Luca Ceresoli
- [PATCH v2 00/41] drm/display: bridge-connector: attach encoder to the connector Icenowy Zheng
  - [PATCH v2 00/41] drm/display: bridge-connector: attach encoder to the connector Luca Ceresoli
    - [PATCH v2 00/41] drm/display: bridge-connector: attach encoder to the connector Icenowy Zheng
- [PATCH v2 00/41] drm/display: bridge-connector: attach encoder to the connector Luca Ceresoli
[PATCH v4 0/2] basic devicetree support for Amlogic A9 Xianwei Zhao via B4 Relay
- [PATCH v4 2/2] arm64: dts: add support for A9 based Amlogic BY401 Xianwei Zhao via B4 Relay
[PATCH v4 1/2] dt-bindings: arm: amlogic: add A311Y3 support Xianwei Zhao via B4 Relay
[PATCH v4 0/8] arm64: amlogic: T7 thermal support Ronald Claveau via B4 Relay
- [PATCH v4 2/8] firmware: meson: sm: Thermal calibration read via secure monitor Ronald Claveau via B4 Relay
  - [PATCH v4 2/8] firmware: meson: sm: Thermal calibration read via secure monitor Neil Armstrong
- [PATCH v4 3/8] firmware: meson: sm: Add thermal calibration SMC call Ronald Claveau via B4 Relay
  - [PATCH v4 3/8] firmware: meson: sm: Add thermal calibration SMC call Neil Armstrong
- [PATCH v4 4/8] thermal: amlogic: Add support for secure monitor calibration readout Ronald Claveau via B4 Relay
  - [PATCH v4 4/8] thermal: amlogic: Add support for secure monitor calibration readout Neil Armstrong
    - [PATCH v4 4/8] thermal: amlogic: Add support for secure monitor calibration readout Ronald Claveau
- [PATCH v4 5/8] arm64: dts: amlogic: t7: Add cooling cells to all CPUs Ronald Claveau via B4 Relay
  - [PATCH v4 5/8] arm64: dts: amlogic: t7: Add cooling cells to all CPUs Neil Armstrong
- [PATCH v4 6/8] arm64: dts: amlogic: t7: Add thermal sensor nodes Ronald Claveau via B4 Relay
  - [PATCH v4 6/8] arm64: dts: amlogic: t7: Add thermal sensor nodes Neil Armstrong
- [PATCH v4 7/8] arm64: dts: amlogic: t7: Add thermal zones Ronald Claveau via B4 Relay
  - [PATCH v4 7/8] arm64: dts: amlogic: t7: Add thermal zones Neil Armstrong
- [PATCH v4 8/8] arm64: dts: amlogic: t7: khadas-vim4: Add fan cooling to thermal zones Ronald Claveau via B4 Relay
  - [PATCH v4 8/8] arm64: dts: amlogic: t7: khadas-vim4: Add fan cooling to thermal zones Neil Armstrong
[PATCH v4 1/8] dt-bindings: thermal: amlogic: Add support for T7 Ronald Claveau via B4 Relay
[PATCH v5 0/2] Add support for Amediatech X98Q (Amlogic S905W2) christian.koever-draxl at student.uibk.ac.at
- [PATCH v5 1/2] dt-bindings: arm: amlogic: add support for Amediatech X98Q christian.koever-draxl at student.uibk.ac.at
- [PATCH v5 2/2] arm64: dts: amlogic: add support for Amediatech X98Q christian.koever-draxl at student.uibk.ac.at
[PATCH v5 0/8] Add VIM4 MCU/FAN support Ronald Claveau via B4 Relay
- [PATCH v5 1/8] dt-bindings: mfd: khadas: Add new compatible for Khadas VIM4 MCU Ronald Claveau via B4 Relay
- [PATCH v5 2/8] dt-bindings: i2c: amlogic: Add compatible for T7 SOC Ronald Claveau via B4 Relay
- [PATCH v5 3/8] mfd: khadas-mcu: Add per-variant configuration infrastructure and VIM4 support Ronald Claveau via B4 Relay
- [PATCH v5 4/8] mfd: khadas-mcu: Add support for VIM4 MCU variant Ronald Claveau via B4 Relay
- [PATCH v5 5/8] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support Ronald Claveau via B4 Relay
  - [PATCH v5 5/8] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support Neil Armstrong
- [PATCH v5 6/8] arm64: dts: amlogic: t7: Add i2c pinctrl node Ronald Claveau via B4 Relay
- [PATCH v5 7/8] arm64: dts: amlogic: t7: Add i2c controller node Ronald Claveau via B4 Relay
- [PATCH v5 8/8] arm64: dts: amlogic: t7: khadas-vim4: Add i2c MCU fan node Ronald Claveau via B4 Relay
[PATCH v5 0/8] arm64: amlogic: T7 thermal support Ronald Claveau via B4 Relay
- [PATCH v5 1/8] dt-bindings: thermal: amlogic: Add support for T7 Ronald Claveau via B4 Relay
- [PATCH v5 2/8] firmware: meson: sm: Thermal calibration read via secure monitor Ronald Claveau via B4 Relay
- [PATCH v5 4/8] thermal: amlogic: Add support for secure monitor calibration readout Ronald Claveau via B4 Relay
- [PATCH v5 5/8] arm64: dts: amlogic: t7: Add cooling cells to all CPUs Ronald Claveau via B4 Relay
- [PATCH v5 6/8] arm64: dts: amlogic: t7: Add thermal sensor nodes Ronald Claveau via B4 Relay
- [PATCH v5 7/8] arm64: dts: amlogic: t7: Add thermal zones Ronald Claveau via B4 Relay
- [PATCH v5 8/8] arm64: dts: amlogic: t7: khadas-vim4: Add fan cooling to thermal zones Ronald Claveau via B4 Relay
[PATCH v5 3/8] firmware: meson: sm: Add thermal calibration SMC call Ronald Claveau via B4 Relay
[PATCH] iio: adc: meson-saradc: fix calibration buffer leak on error Felix Gu
- [PATCH] iio: adc: meson-saradc: fix calibration buffer leak on error David Lechner
  - [PATCH] iio: adc: meson-saradc: fix calibration buffer leak on error Jonathan Cameron
    - [PATCH] iio: adc: meson-saradc: fix calibration buffer leak on error David Lechner
    - [PATCH] iio: adc: meson-saradc: fix calibration buffer leak on error Felix Gu
    - [PATCH] iio: adc: meson-saradc: fix calibration buffer leak on error Jonathan Cameron
- [PATCH] iio: adc: meson-saradc: fix calibration buffer leak on error Rosen Penev
  - [PATCH] iio: adc: meson-saradc: fix calibration buffer leak on error Jonathan Cameron
    - [PATCH] iio: adc: meson-saradc: fix calibration buffer leak on error Felix Gu
    - [PATCH] iio: adc: meson-saradc: fix calibration buffer leak on error Jonathan Cameron
- [PATCH] iio: adc: meson-saradc: fix calibration buffer leak on error Andy Shevchenko
[PATCH v2] iio: adc: meson-saradc: fix calibration buffer leak on error Felix Gu
- [PATCH v2] iio: adc: meson-saradc: fix calibration buffer leak on error Jonathan Cameron
[PATCH] spi: amlogic-spisg: initialize completion before requesting IRQ Felix Gu
- [PATCH] spi: amlogic-spisg: initialize completion before requesting IRQ Mark Brown
[PATCH 0/2] pinctrl: add support amlogic a9 Xianwei Zhao via B4 Relay
[PATCH 1/2] dt-bindings: pinctl: amlogic,pinctrl-a4: Add compatible string for A9 Xianwei Zhao via B4 Relay
- [PATCH 1/2] dt-bindings: pinctl: amlogic,pinctrl-a4: Add compatible string for A9 Krzysztof Kozlowski
[PATCH 2/2] pinctrl: meson: support amlogic A9 SoC Xianwei Zhao via B4 Relay
[PATCH] staging: media: meson: fix typo in codec files Maha Maryam Javaid
- [PATCH] staging: media: meson: fix typo in codec files Maha Maryam Javaid
[PATCH v3 07/11] thermal/of: Rename the devm_thermal_of_cooling_device_register() function Daniel Lezcano
[PATCH 00/10] spi: Use FIELD_MODIFY() for bitfield operations Hans Zhang
[PATCH 01/10] spi: amlogic-spifc-a1: Use FIELD_MODIFY() Hans Zhang
[PATCH 02/10] spi: amlogic-spisg: Use FIELD_MODIFY() Hans Zhang
[PATCH 03/10] spi: cadence-xspi: Use FIELD_MODIFY() Hans Zhang
- [PATCH 03/10] spi: cadence-xspi: Use FIELD_MODIFY() Mark Brown
[PATCH 04/10] spi: meson-spicc: Use FIELD_MODIFY() Hans Zhang
[PATCH 05/10] spi: nxp-xspi: Use FIELD_MODIFY() Hans Zhang
[PATCH 06/10] spi: sn-f-ospi: Use FIELD_MODIFY() Hans Zhang
[PATCH 07/10] spi: stm32-ospi: Use FIELD_MODIFY() Hans Zhang
[PATCH 08/10] spi: stm32-qspi: Use FIELD_MODIFY() Hans Zhang
[PATCH 09/10] spi: sunplus-sp7021: Use FIELD_MODIFY() Hans Zhang
[PATCH 10/10] spi: uniphier: Use FIELD_MODIFY() Hans Zhang

Last message date: Thu Apr 30 17:52:42 PDT 2026
Archived on: Thu Apr 30 17:52:50 PDT 2026

Messages sorted by: [ subject ] [ author ] [ date ]
More info on this list...

This archive was generated by Pipermail 0.09 (Mailman edition).