[PATCH v2 3/3] arm64: dts: amlogic: t7: khadas-vim4: Enable Bluetooth

[Ronald Claveau]

On 4/20/26 10:47 AM, Neil Armstrong wrote:
>> Enable UART C on the Khadas VIM4 board and attach the BCM43438
>>   compatible Bluetooth controller to it. The node configures the RTS/CTS
>> hardware flow control, the associated pinmux, the power supplies
>> (vddao_3v3
>> and vddao_1v8), the 32 kHz LPO clock shared with the wifi32k fixed
>> clock, and the GPIO lines used for host wakeup, device wakeup and
>> shutdown.
>>
>> Remove clocks and clock-names for UART A, as they are defined in DTSI.
> 
> This should be a separate patch.

Thanks for your feedback.
I will then add the remove redundant clocks before that one.

-- 
Best regards,
Ronald