[PATCH v3 0/4] soc: amlogic: clk-measure: add A1 and T7 support

[Jian Hu via B4 Relay]

This series adds Amlogic clock measurement support for A1 and T7 SoCs,
including binding updates, driver additions, and device tree enablement.

Signed-off-by: Jian Hu <jian.hu at amlogic.com>
---
Changes in v3:
- Place the clock-measure node after pwm_ao_gh node for t7.
- Link to v2: https://lore.kernel.org/r/20260415-clkmsr_a1_t7-v2-0-02b6314427e6@amlogic.com

Changes in v2:
- Add const for a1 and t7 clock measure table.
- Use b4 to send this series.
- Link to v1: https://lore.kernel.org/all/20260410100329.3167482-1-jian.hu@amlogic.com

---
Jian Hu (4):
      dt-bindings: soc: amlogic: clk-measure: Add A1 and T7 compatible
      soc: amlogic: clk-measure: Add A1 and T7 support
      arm64: dts: meson: a1: Add clk measure support
      arm64: dts: amlogic: t7: Add clk measure support

 .../soc/amlogic/amlogic,meson-gx-clk-measure.yaml  |   2 +
 arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi        |   5 +
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi          |   5 +
 drivers/soc/amlogic/meson-clk-measure.c            | 272 +++++++++++++++++++++
 4 files changed, 284 insertions(+)
---
base-commit: 401e5c73eedde8225e87bd11c794b8409248ff41
change-id: 20260415-clkmsr_a1_t7-9820984d0af1

Best regards,
-- 
Jian Hu <jian.hu at amlogic.com>