[PATCH v2 0/2] Add support for Amediatech X98Q (Amlogic S905W2)

[Ferass El Hafidi]

Hi,

On Mon, 20 Apr 2026 06:18, christian.koever-draxl at student.uibk.ac.at wrote:
>From: Christian Stefan Kövér-Draxl <christian.koever-draxl at student.uibk.ac.at>
>
>Supported features:
>- 1GB/2GB RAM (via U-Boot memory fixup)
>- 10/100 Ethernet (Internal PHY)
>- eMMC and SD card storage
>- PWM-based CPU voltage regulation
>- UART (Serial console)
>
>Changes in v2:
>- Split dt-bindings and dts changes into separate patches.
>- Updated model string to match documented vendor prefix.
>- Put vddio_sd states array in a single line.
>- Added a clarifying comment for the unsupported Amlogic W150S1 Wi-Fi module.
>
>Notes:
>- The console uses uart_b at 921600 baud.
>- Verified memory via /proc/device-tree; U-Boot patches the node to around 2GB.
>- Tested on the 2GB RAM plus 16GB eMMC variant.
>

Sorry I was not clear, but the patches need to have a description.

checkpatch.pl should complain about this. Please use it to check that
your patches are in the correct format.

See the kernel docs about sending patches here:
https://docs.kernel.org/process/submitting-patches.html#describe-your-changes

>Christian Stefan Kövér-Draxl (2):
>  dt-bindings: arm: amlogic: add X98Q compatible
>  arm64: dts: amlogic: add support for X98Q
>
> .../devicetree/bindings/arm/amlogic.yaml      |   7 +
> arch/arm64/boot/dts/amlogic/Makefile          |   1 +
> .../boot/dts/amlogic/meson-s4-s905w2-x98q.dts | 250 ++++++++++++++++++
> 3 files changed, 258 insertions(+)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-s4-s905w2-x98q.dts
>
>-- 
>2.53.0

--
Best regards,
Ferass