[PATCH v2 4/4] arm64: dts: amlogic: t7: Add clk measure support

[Jian Hu]

Hi Ronald,


Thanks for your review.

On 4/17/2026 5:48 PM, Ronald Claveau wrote:
> [ EXTERNAL EMAIL ]
>
> Hello Jian,
>
> On 4/15/26 10:33 AM, Jian Hu via B4 Relay wrote:
>> From: Jian Hu <jian.hu at amlogic.com>
>>
>> Add the clock measure device to the T7 SoC family.
>>
>> Signed-off-by: Jian Hu <jian.hu at amlogic.com>
>> ---
>>   arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 5 +++++
>>   1 file changed, 5 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
>> index 7fe72c94ed62..cec2ea74850d 100644
>> --- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
>> @@ -701,6 +701,11 @@ pwm_ao_cd: pwm at 60000 {
>>                                status = "disabled";
>>                        };
>>
>> +                     clock-measurer at 48000 {
>> +                             compatible = "amlogic,t7-clk-measure";
>> +                             reg = <0x0 0x48000 0x0 0x1c>;
>> +                     };
>> +
> Can you please order by reg, it should be between pwm_ao_gh and pwm_ab.
> Thank you.


According to the "Order of Nodes" chapter in 
Documentation/devicetree/bindings/dts-coding-style.rst,

nodes of the same type should be grouped together, and this takes higher 
priority.

So I have placed the clock-measure node after all PWM nodes to avoid 
splitting the PWM group.


Best regards,

Jian