April 2013 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Apr 1 14:04:38 EDT 2013
Ending: Tue Apr 30 03:46:33 EDT 2013
Messages: 410

• [PATCH] Implement ALTERNATE memory layout.   Sascha Hauer
  • [PATCH] Implement ALTERNATE memory layout.   Sascha Hauer
• No subject   Lucas Stach
  • [PATCH v3 02/10] tegra: define TEGRA20 arch type   Lucas Stach
    • [PATCH v3 02/10] tegra: define TEGRA20 arch type   Antony Pavlov
    • [PATCH v3 02/10] tegra: define TEGRA20 arch type   antonynpavlov at gmail.com
  • [PATCH v3 03/10] tegra: switch to DT only   Lucas Stach
    • [PATCH v3 03/10] tegra: switch to DT only   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH v3 03/10] tegra: switch to DT only   antonynpavlov at gmail.com
  • [PATCH v3 04/10] tegra: add driver for the clock and reset module   Lucas Stach
  • [PATCH v3 05/10] tegra: add T20 timer driver   Lucas Stach
  • [PATCH v3 06/10] tegra: add T20 power management controller driver   Lucas Stach
  • [PATCH v3 07/10] tegra: add common lowlevel startup   Lucas Stach
  • [PATCH v3 08/10] tegra: add generic debug UART support   Lucas Stach
    • [PATCH v3 08/10] tegra: add generic debug UART support   antonynpavlov at gmail.com
      • [PATCH v3 08/10] tegra: add generic debug UART support   Lucas Stach
      • [PATCH v3 08/10] tegra: add generic debug UART support   antonynpavlov at gmail.com
      • [PATCH v3 08/10] tegra: add generic debug UART support   Lucas Stach
      • [PATCH v3 08/10] tegra: add generic debug UART support   antonynpavlov at gmail.com
      • [PATCH v3 08/10] tegra: add generic debug UART support   Lucas Stach
      • [PATCH v3 08/10] tegra: add generic debug UART support   Lucas Stach
      • [PATCH v3 08/10] tegra: add generic debug UART support   antonynpavlov at gmail.com
  • [PATCH v3 09/10] tegra: add generic meminit   Lucas Stach
  • [PATCH v3 10/10] tegra: add GPIO controller driver   Lucas Stach
    • [PATCH v3 10/10] tegra: add GPIO controller driver   antonynpavlov at gmail.com
• [PATCH v3 01/10] tegra: pull in iomap.h from the Linux kernel   Lucas Stach
• [PATCH] dtc: add .gitignore for generated files   Lucas Stach
  • [PATCH] dtc: add .gitignore for generated files   Sascha Hauer
• [PATCH RESEND] parameter: fix build warning when !CONFIG_PARAMETER   Sascha Hauer
• [PATCH] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform.   Sascha Hauer
  • [PATCH] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform.   Krzysztof Halasa
    • [PATCH] ARM: Support for IXP4xx CPU.   Krzysztof Halasa
      • [PATCH] ARM: Support for IXP4xx CPU.   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH] ARM: Support for IXP4xx CPU.   Krzysztof Halasa
      • [PATCH] ARM: Support for IXP4xx CPU.   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH] ARM: Support for IXP4xx hardware Queue Manager.   Krzysztof Halasa
      • [PATCH] ARM: Support for IXP4xx hardware Queue Manager.   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH] ARM: Support for IXP4xx Network Processor Engines (NPEs).   Krzysztof Halasa
      • [PATCH] ARM: Support for IXP4xx Network Processor Engines (NPEs).   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH] ARM: Support for IXP4xx built-in Ethernet interfaces.   Krzysztof Halasa
      • [PATCH] ARM: Support for IXP4xx built-in Ethernet interfaces.   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform.   Sascha Hauer
• [PATCH] fb: calculate resource end   Sascha Hauer
• Problems with the Load a new kernel image   "Breixo López García"
  • Problems with the Load a new kernel image   Jan Lübbe
• [PATCH v2] commands/tftp: use debug() for debug output   Hubert Feurstein
  • [PATCH v2] commands/tftp: use debug() for debug output   Sascha Hauer
• [RFCv2 PATCH 1/2] OMAP: Move bootsource functions   Teresa Gámez
  • [RFCv2 PATCH 1/2] OMAP: Move bootsource functions   Sascha Hauer
• [RFCv2 PATCH 2/2] OMAP: Add option to use environment from MMC   Teresa Gámez
• [PATCH 1/2] mci-core: use dev_* for messages   Hubert Feurstein
  • [PATCH 2/2] mci-core: fix coding style   Hubert Feurstein
  • [PATCH 1/2] mci-core: use dev_* for messages   Sascha Hauer
• [PATCH] bootsource   Sascha Hauer
  • [PATCH 1/5] ARM: i.MX: rename barebox_loc to bootsource   Sascha Hauer
  • [PATCH 2/5] bootsource: create arch independent bootsource framework   Sascha Hauer
  • [PATCH 3/5] bootsource: use initcall to export bootsource location to environment   Sascha Hauer
  • [PATCH 4/5] bootsource: add support for bootsource instance information   Sascha Hauer
    • [PATCH 4/5] bootsource: add support for bootsource instance information   Marc Kleine-Budde
  • [PATCH 5/5] ARM: i.MX53: Add bootsource instance information   Sascha Hauer
• [PATCH] ARM: tqma53: change uart to second uart   Sascha Hauer
• [PATCH] i.MX53 lowlevel work   Sascha Hauer
  • [PATCH 1/4] ARM: i.MX53: Fix pll216 setup   Sascha Hauer
  • [PATCH 2/4] ARM: i.MX53: split lowlevel function into early/nonearly version   Sascha Hauer
  • [PATCH 3/4] ARM: tx53: use early lowlevel function   Sascha Hauer
  • [PATCH 4/4] ARM: tqma53: call SoC lowlevel function early   Sascha Hauer
    • [PATCH 4/4] ARM: tqma53: call SoC lowlevel function early   Eric Bénard
• [PATCH] ARM: zynq: fix zynq_clks enum   Steffen Trumtrar
• [PATCH 0/3] ARM: zynq: add support for ethernet   Steffen Trumtrar
  • [PATCH 1/3] net: macb: turn off endian_swp_pkt_en   Steffen Trumtrar
  • [PATCH 2/3] ARM: zynq: add support for ethernet   Steffen Trumtrar
  • [PATCH 3/3] ARM: zedboard: add ethernet device   Steffen Trumtrar
• [PATCH v2] bootsource   Marc Kleine-Budde
  • [PATCH v2 1/7] ARM: i.MX: rename barebox_loc to bootsource   Marc Kleine-Budde
  • [PATCH v2 2/7] bootsource: create arch independent bootsource framework   Marc Kleine-Budde
  • [PATCH v2 3/7] bootsource: use initcall to export bootsource location to environment   Marc Kleine-Budde
  • [PATCH v2 4/7] bootsource: add support for bootsource instance information   Marc Kleine-Budde
  • [PATCH v2 5/7] bootsource: add definition for i2c-eeprom, spi-nor, spi-eeprom and usb   Marc Kleine-Budde
  • [PATCH v2 6/7] ARM: i.MX53: Add bootsource instance information   Marc Kleine-Budde
  • [PATCH v2 7/7] ARM: mxs: add bootsource detection   Marc Kleine-Budde
• [PATCH] [RFC] ARM OMAP4: enable DSS by default   Christoph Fritz
  • Re[2]: [PATCH] [RFC] ARM OMAP4: enable DSS by default   Alexander Shiyan
• [PATCH] ARM omap: add omap4_get_sysclk()   Christoph Fritz
• [PATCH] omap4-fb: add driver   Christoph Fritz
  • [PATCH] omap4-fb: add driver   Sascha Hauer
    • [PATCH v2] omap4-fb: add driver   Christoph Fritz
      • [PATCH v2] omap4-fb: add driver   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH v2] omap4-fb: add driver   Sascha Hauer
      • [PATCH v2] omap4-fb: add driver   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH v2] omap4-fb: add driver   Christoph Fritz
• v2013.04.0   Sascha Hauer
• [PATCH 1/1] lib: import kstrtox from the kernel 3.8   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] lib: import kstrtox from the kernel 3.8   Sascha Hauer
• [PATCH 1/2] Makefile: Create empty <config.h> if this header file is not needed by board   Sascha Hauer
  • Re[2]: [PATCH 1/2] Makefile: Create empty <config.h> if this header file is not needed by board   Alexander Shiyan
    • [PATCH 1/2] Makefile: Create empty <config.h> if this header file is not needed by board   Sascha Hauer
      • Re[2]: [PATCH 1/2] Makefile: Create empty <config.h> if this header file is not needed by board   Alexander Shiyan
      • [PATCH 1/2] Makefile: Create empty <config.h> if this header file is not needed by board   Sascha Hauer
      • Re[2]: [PATCH 1/2] Makefile: Create empty <config.h> if this header file is not needed by board   Alexander Shiyan
• [PATCH] ARM/MXS: add more ROM code related documentation   Juergen Beisert
  • [PATCH] ARM/MXS: add more ROM code related documentation   Sascha Hauer
• [PATCH v2 1/2] Makefile: Create empty <config.h> if this header file is not needed by board   Alexander Shiyan
  • [PATCH v2 2/2] Remove unused config.h   Alexander Shiyan
  • [PATCH v2 1/2] Makefile: Create empty <config.h> if this header file is not needed by board   Sascha Hauer
• [PATCH] ArchosG9: add keyboard input and new reset menu entries (v3)   Vicente Bergas
  • [PATCH] OMAP4: add command to select next boot device priority   Vicente Bergas
    • [PATCH] OMAP4: add command to select next boot device priority   Sascha Hauer
• [PATCH 1/1] highbank: switch to defaultenv-2   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] highbank: switch to defaultenv-2   Sascha Hauer
• [PATCH 1/2] ARM: i.MX: Update MX2x iomux definitions   Alexander Shiyan
  • [PATCH 2/2] ARM: i.MX: Update MX51 iomux definitions   Alexander Shiyan
    • [PATCH 2/2] ARM: i.MX: Update MX51 iomux definitions   Sascha Hauer
      • Re[2]: [PATCH 2/2] ARM: i.MX: Update MX51 iomux definitions   Alexander Shiyan
      • [PATCH 2/2] ARM: i.MX: Update MX51 iomux definitions   Sascha Hauer
      • Re[2]: [PATCH 2/2] ARM: i.MX: Update MX51 iomux definitions   Alexander Shiyan
      • [PATCH 2/2] ARM: i.MX: Update MX51 iomux definitions   Eric Bénard
      • Re[2]: [PATCH 2/2] ARM: i.MX: Update MX51 iomux definitions   Alexander Shiyan
      • Re[2]: [PATCH 2/2] ARM: i.MX: Update MX51 iomux definitions   Alexander Shiyan
      • Re[3]: [PATCH 2/2] ARM: i.MX: Update MX51 iomux definitions   Alexander Shiyan
      • [PATCH 2/2] ARM: i.MX: Update MX51 iomux definitions   Sascha Hauer
• can barebox running on mini6410 boot from nand?   Yi Qingliang
  • can barebox running on mini6410 boot from nand?   Juergen Beisert
• [PATCH] mci: Fix bug if probe parameter is omitted   Alexander Shiyan
  • [PATCH] mci: Fix bug if probe parameter is omitted   Sascha Hauer
• [PATCH] treewide: Fix typo seperate -> separate   Sascha Hauer
• [PATCH] Add device parameter convenience helpers   Sascha Hauer
  • [PATCH 01/21] param: Add dev member to struct param_d   Sascha Hauer
  • [PATCH 02/21] param: refactor __dev_add_param   Sascha Hauer
  • [PATCH 03/21] param: Add integer and boolean parameter helpers   Sascha Hauer
  • [PATCH 04/21] param: Add ip address convenience function   Sascha Hauer
  • [PATCH 05/21] net: ksz8864: Use dev_add_param_bool for enable parameter   Sascha Hauer
  • [PATCH 06/21] net: store ethernet device parameters in device   Sascha Hauer
  • [PATCH 07/21] netconsole: use dev_add_param_* helpers   Sascha Hauer
  • [PATCH 08/21] param: remove now unused dev_[gs]et_param_ip   Sascha Hauer
  • [PATCH 09/21] treewide: Use dev_add_param_int_ro where possible   Sascha Hauer
  • [PATCH 10/21] mci: Use dev_add_param_int for probe parameter   Sascha Hauer
  • [PATCH 11/21] ata: Use dev_add_param_bool for probe parameter   Sascha Hauer
  • [PATCH 12/21] fb: Use dev_add_param_bool for enable parameter   Sascha Hauer
  • [PATCH 13/21] fb: imxfb: Use dev_add_param_int for alpha parameter   Sascha Hauer
  • [PATCH 14/21] fb: imx-ipu-fb: Use dev_add_param_int for alpha parameter   Sascha Hauer
  • [PATCH 15/21] param: pass param to dev_remove_param   Sascha Hauer
  • [PATCH 16/21] pwm: Use dev_add_param_int for pwm parameters   Sascha Hauer
  • [PATCH 17/21] ARM: i.MX: iim: Use dev_add_param_bool for parameters   Sascha Hauer
  • [PATCH 18/21] console: Use dev_add_param_int for baudrate parameter   Sascha Hauer
  • [PATCH 19/21] mtd: Nand: Use dev_add_param_bool for erasebad parameter   Sascha Hauer
    • [PATCH 19/21] mtd: Nand: Use dev_add_param_bool for erasebad parameter   Alexander Aring
      • [PATCH 19/21] mtd: Nand: Use dev_add_param_bool for erasebad parameter   Sascha Hauer
      • [PATCH 19/21] mtd: Nand: Use dev_add_param_bool for erasebad parameter   Alexander Aring
  • [PATCH 20/21] USB gadget at91: Use dev_add_param_bool for vbus parameter   Sascha Hauer
  • [PATCH 21/21] ARM: MXS: ocotp: Use dev_add_param_bool for parameter   Sascha Hauer
• [PATCH] commands: i2c: change 0X to 0x   Jan Luebbe
  • [PATCH] commands: i2c: change 0X to 0x   Sascha Hauer
• [PATCH] ArchosG9: add keyboard input and new reset menu entries (v4)   Vicente Bergas
  • [PATCH] OMAP4: add command to select next boot device priority   Vicente Bergas
    • [PATCH] OMAP4: add command to select next boot device priority   Sascha Hauer
• [PATCH v4 01/13] tegra: pull in iomap.h from the Linux kernel   Lucas Stach
  • [PATCH v4 06/13] tegra: switch to DT only   Lucas Stach
  • [PATCH v4 07/13] tegra: add driver for the clock and reset module   Lucas Stach
  • [PATCH v4 08/13] tegra: add T20 timer driver   Lucas Stach
  • [PATCH v4 09/13] tegra: add T20 power management controller driver   Lucas Stach
  • [PATCH v4 10/13] tegra: add common lowlevel startup   Lucas Stach
  • [PATCH v4 11/13] tegra: add generic debug UART support   Lucas Stach
    • [PATCH v4 11/13] tegra: add generic debug UART support   antonynpavlov at gmail.com
  • [PATCH v4 12/13] tegra: add generic meminit   Lucas Stach
  • [PATCH v4 13/13] tegra: add GPIO controller driver   Lucas Stach
    • [PATCH v4 13/13] tegra: add GPIO controller driver   antonynpavlov at gmail.com
• [PATCH v4 02/13] tegra: switch to proper CPU type   Lucas Stach
• [PATCH v4 03/13] tegra: unify spelling in Kconfig with Linux kernel   Lucas Stach
• [PATCH v4 04/13] tegra: introduce Tegra 20 SoC type   Lucas Stach
• [PATCH v4 05/13] tegra: move default textbase   Lucas Stach
• [PATCH] nand_base: detect more ONFI flash   Eric Bénard
  • [PATCH] nand_base: detect more ONFI flash   Eric Bénard
    • [PATCH v2] nand_base: detect more ONFI flash   Eric Bénard
      • [PATCH v2] nand_base: detect more ONFI flash   Sascha Hauer
• [PATCH 1/2] mx53-loco: provide the right header for serial downloader   Eric Bénard
  • [PATCH 2/2] i.MX53: add serial downloader bootsource   Eric Bénard
  • [PATCH 1/2] mx53-loco: provide the right header for serial downloader   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/2] mx53-loco: provide the right header for serial downloader   Sascha Hauer
    • [PATCH 1/2] mx53-loco: provide the right header for serial downloader   Eric Bénard
• [PATCH] mtd: update NAND manufacturer names from the kernel   Jan Luebbe
  • [PATCH] mtd: update NAND manufacturer names from the kernel   Sascha Hauer
• [RFC] omap4-fb: use uncached screen_base   Jan Weitzel
  • [RFC] omap4-fb: use uncached screen_base   Sascha Hauer
    • [RFC] omap4-fb: use uncached screen_base   Alexander Aring
  • [RFC] omap4-fb: use uncached screen_base   Alexander Aring
• [PATCH] mtdraw: fix oob read and write   Eric Bénard
  • [PATCH] mtdraw: fix oob read and write   Sascha Hauer
• [PATCH] dtc: remove autogenerated modules.order   Sascha Hauer
• [PATCH v5 01/13] tegra: pull in iomap.h from the Linux kernel   Lucas Stach
  • [PATCH v5 06/13] tegra: switch to DT only   Lucas Stach
  • [PATCH v5 07/13] tegra: add driver for the clock and reset module   Lucas Stach
  • [PATCH v5 08/13] tegra: add T20 timer driver   Lucas Stach
  • [PATCH v5 09/13] tegra: add T20 power management controller driver   Lucas Stach
  • [PATCH v5 10/13] tegra: add common lowlevel startup   Lucas Stach
  • [PATCH v5 11/13] tegra: add generic debug UART support   Lucas Stach
  • [PATCH v5 12/13] tegra: add generic meminit   Lucas Stach
  • [PATCH v5 13/13] tegra: add GPIO controller driver   Lucas Stach
  • [PATCH v5 01/13] tegra: pull in iomap.h from the Linux kernel   antonynpavlov at gmail.com
    • [PATCH v5 01/13] tegra: pull in iomap.h from the Linux kernel   Sascha Hauer
• [PATCH v5 02/13] tegra: switch to proper CPU type   Lucas Stach
• [PATCH v5 03/13] tegra: unify spelling in Kconfig with Linux kernel   Lucas Stach
• [PATCH v5 04/13] tegra: introduce Tegra 20 SoC type   Lucas Stach
• [PATCH v5 05/13] tegra: move default textbase   Lucas Stach
• [For-master critical fix PATCH 1/1] login: disable input console if password wrong   Jean-Christophe PLAGNIOL-VILLARD
  • [For-master critical fix PATCH 1/1] login: disable input console if password wrong   Sascha Hauer
    • [For-master critical fix PATCH 1/1] login: disable input console if password wrong   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] atmel_mci: add write protect detection support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] atmel_mci: add write protect detection support   Sascha Hauer
• [PATCH] omap: move to common bootsource framework   Jan Luebbe
  • [PATCH] omap: move to common bootsource framework   Sascha Hauer
• [PATCH 1/1] at91sam9m10g45ek: add spi dataflash supprt   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] at91sam9m10g45ek: add spi dataflash supprt   Sascha Hauer
• [PATCH 1/2] beaglebone: remove stray semicolon   Jan Luebbe
  • [PATCH 1/2] beaglebone: remove stray semicolon   Sascha Hauer
• [PATCH 2/2] console: fix console without CONFIG_PARAMETER   Jan Luebbe
• [PATCH] commands: the crc command is actually called crc32   Jan Luebbe
  • [PATCH] commands: the crc command is actually called crc32   Sascha Hauer
• [PATCH] Remove unimplemented usb_driver_unregister declaration   Alexander Shiyan
  • [PATCH] Remove unimplemented usb_driver_unregister declaration   Sascha Hauer
• [PATCH] omap4 regression: set correct boot source   Vicente Bergas
  • [PATCH] omap4 regression: set correct boot source   Jan Lübbe
  • [PATCH] omap4 regression: set correct boot source   Sascha Hauer
• Boot from SD fail after 2013.02   Sascha Hauer
  • Re[2]: Boot from SD fail after 2013.02   Alexander Shiyan
    • Boot from SD fail after 2013.02   Sascha Hauer
      • Re[2]: Boot from SD fail after 2013.02   Alexander Shiyan
      • Boot from SD fail after 2013.02   Sascha Hauer
      • Re[2]: Boot from SD fail after 2013.02   Alexander Shiyan
      • Boot from SD fail after 2013.02   Sascha Hauer
      • Re[2]: Boot from SD fail after 2013.02   Alexander Shiyan
      • Boot from SD fail after 2013.02   Sascha Hauer
      • Re[2]: Boot from SD fail after 2013.02   Alexander Shiyan
• [PATCH] memory commands   Sascha Hauer
  • [PATCH 1/7] memory commands: export common functions   Sascha Hauer
  • [PATCH 2/7] memory commands: move memory_display to separate file   Sascha Hauer
  • [PATCH 4/7] memory commands: cleanup initialization   Sascha Hauer
  • [PATCH 5/7] memory commands: make rw_buf global   Sascha Hauer
  • [PATCH 6/7] memory commands: separate into one file per command   Sascha Hauer
  • [PATCH 7/7] Add memory modify command (mm)   Sascha Hauer
• [PATCH 3/7] Use a common define for RW_BUF_SIZE   Sascha Hauer
• [PATCH 1/2] defaultenv-2: Fix verbose booting   Sascha Hauer
  • [PATCH 2/2] defaultenv-2: net: use oftree when existing   Sascha Hauer
• [PATCH] environment: support redundant environments   Jan Luebbe
  • [PATCH] environment: support redundant environments   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arm: omap: am33xx: store boot source info from ROM loader   Jan Luebbe
  • [PATCH] arm: omap: am33xx: store boot source info from ROM loader   Sascha Hauer
  • [PATCH] arm: omap: am33xx: store boot source info from ROM loader   Sascha Hauer
• [PATCH] am33xx-clock: configure PLLs based on oscillator frequency   Jan Luebbe
  • [PATCH] am33xx-clock: configure PLLs based on oscillator frequency   Sascha Hauer
• [PATCH] arm: write image checksums into the barebox header   Jan Luebbe
  • [PATCH] arm: write image checksums into the barebox header   Sascha Hauer
• [PATCH] am33xx: add defines for GPIOs   Jan Luebbe
  • [PATCH] am33xx: add defines for GPIOs   Sascha Hauer
• [PATCH] defaultenv-2: init: display prompt after running /env/init/*   Jan Luebbe
  • [PATCH] defaultenv-2: init: display prompt after running /env/init/*   Sascha Hauer
• [PATCH] mx6-sabrelite: Setup CCM_CCOSR register   Fabio Estevam
  • [PATCH] mx6-sabrelite: Setup CCM_CCOSR register   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 1/2] m33xx-clock: configure PLLs based on oscillator frequency   Jan Luebbe
  • [PATCH v2 2/2] m33xx-clock: remove unused code   Jan Luebbe
• [PATCH] Makefile: drop duplicate definition of cmd_objcopy   Jan Luebbe
• [PATCH] ARM i.MX28: make chip reset via reset pin work again   Marc Kleine-Budde
  • [PATCH] ARM i.MX28: make chip reset via reset pin work again   Juergen Beisert
    • [PATCH] ARM i.MX28: make chip reset via reset pin work again   Marc Kleine-Budde
• [PATCH] commands/digest: add verify support   Hubert Feurstein
  • [PATCH] commands/digest: add verify support   Sascha Hauer
    • [PATCHv2] commands/digest: add verify support   Hubert Feurstein
      • [PATCHv2] commands/digest: add verify support   Sascha Hauer
• [PATCH 1/2] common/filetype: move partition-table detection into own function   Hubert Feurstein
  • [PATCH 2/2] common/partition: check only for partition table types   Hubert Feurstein
  • [PATCH 1/2] common/filetype: move partition-table detection into own function   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/2] common/filetype: move partition-table detection into own function   Sascha Hauer
• [PATCH v2] ARM i.MX28: make chip reset via reset pin work again   Marc Kleine-Budde
  • [PATCH v2] ARM i.MX28: make chip reset via reset pin work again   Marc Kleine-Budde
    • [PATCH v2] ARM i.MX28: make chip reset via reset pin work again   Sascha Hauer
      • [PATCH v2] ARM i.MX28: make chip reset via reset pin work again   Marc Kleine-Budde
      • [PATCH v2] ARM i.MX28: make chip reset via reset pin work again   Sascha Hauer
      • [PATCH v2] ARM i.MX28: make chip reset via reset pin work again   Marc Kleine-Budde
• [PATCH 1/5] GPIO: Rename "drivers/gpio.c" to "drivers/gpiolib.c"   Alexander Shiyan
  • [PATCH 2/5] ARM: i.MX: Move GPIO driver to drivers/gpio   Alexander Shiyan
  • [PATCH 3/5] GPIO: i.MX: Rewrite driver for using generic GPIO code   Alexander Shiyan
    • [PATCH 3/5] GPIO: i.MX: Rewrite driver for using generic GPIO code   Sascha Hauer
      • Re[2]: [PATCH 3/5] GPIO: i.MX: Rewrite driver for using generic GPIO code   Alexander Shiyan
      • [PATCH 3/5] GPIO: i.MX: Rewrite driver for using generic GPIO code   Sascha Hauer
      • Re[2]: [PATCH 3/5] GPIO: i.MX: Rewrite driver for using generic GPIO code   Alexander Shiyan
  • [PATCH 4/5] GPIO: i.MX: Cleanup driver code   Alexander Shiyan
    • [PATCH 4/5] GPIO: i.MX: Cleanup driver code   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 4/5] GPIO: i.MX: Cleanup driver code   Sascha Hauer
  • [PATCH 5/5] Introduce coredevice_platform_driver() macro and use it for GPIO drivers   Alexander Shiyan
  • [PATCH 1/5] GPIO: Rename "drivers/gpio.c" to "drivers/gpiolib.c"   Sascha Hauer
• [PATCH] ubimkvol: Typo fix   Alexander Shiyan
• [PATCH] clocksource: Add pointer to clocksource structure in read function   Alexander Shiyan
  • [PATCH] clocksource: Add pointer to clocksource structure in read function   Jean-Christophe PLAGNIOL-VILLARD
    • Re[2]: [PATCH] clocksource: Add pointer to clocksource structure in read function   Alexander Shiyan
      • [PATCH] clocksource: Add pointer to clocksource structure in read function   Jean-Christophe PLAGNIOL-VILLARD
      • Re[2]: [PATCH] clocksource: Add pointer to clocksource structure in read function   Alexander Shiyan
      • [PATCH] clocksource: Add pointer to clocksource structure in read function   Jean-Christophe PLAGNIOL-VILLARD
      • Re[2]: [PATCH] clocksource: Add pointer to clocksource structure in read function   Alexander Shiyan
  • [PATCH] clocksource: Add pointer to clocksource structure in read function   Sascha Hauer
    • Re[2]: [PATCH] clocksource: Add pointer to clocksource structure in read function   Alexander Shiyan
• [PATCH] devicetree patches   Sascha Hauer
  • [PATCH 1/6] of: parse phandles before probing devices   Sascha Hauer
  • [PATCH 2/6] of: Add of_property_read_string_index()   Sascha Hauer
  • [PATCH 3/6] of: Allow multiple resources in 'reg' property   Sascha Hauer
  • [PATCH 4/6] of: read resource names from devicetree   Sascha Hauer
  • [PATCH 5/6] of: partitions: pass struct cdev as argument   Sascha Hauer
  • [PATCH 6/6] of: partitions: create bb device for nand flashes   Sascha Hauer
• [PATCH 1/3] cfi_flash: add shift option for some cfi memory chips   Oleksij Rempel
  • [PATCH 1/3] cfi_flash: add shift option for some cfi memory chips   Sascha Hauer
    • Re[2]: [PATCH 1/3] cfi_flash: add shift option for some cfi memory chips   Alexander Shiyan
• [PATCH 3/3] net: add new ar231x-eth driver   Oleksij Rempel
  • [PATCH 3/3] net: add new ar231x-eth driver   Sascha Hauer
• [PATCH 2/3][WiP] add atheros MIPS based ar2313 WiSoC chips   Oleksij Rempel
  • [PATCH 2/3][WiP] add atheros MIPS based ar2313 WiSoC chips   Oleksij Rempel
  • [PATCH 2/3][WiP] add atheros MIPS based ar2313 WiSoC chips   Sascha Hauer
  • [PATCH 2/3][WiP] add atheros MIPS based ar2313 WiSoC chips   antonynpavlov at gmail.com
• [PATCH] pinctrl support   Sascha Hauer
  • [PATCH 1/4] Add initial pinctrl support   Sascha Hauer
  • [PATCH 2/4] pinctrl: switch i.MX iomux-v3 support to pinctrl   Sascha Hauer
  • [PATCH 3/4] pinctrl: move imx-iomux-v2 to drivers/pinctrl/   Sascha Hauer
  • [PATCH 4/4] pinctrl: move imx-iomux-v1 to drivers/pinctrl/   Sascha Hauer
• Make Chumby work again with its SD card   Juergen Beisert
  • [PATCH 1/2] MXS/Chumby: fix MCI device registration   Juergen Beisert
  • [PATCH 2/2] MXS/MCI: simplify reset of the MCI device block   Juergen Beisert
  • Make Chumby work again with its SD card   Sascha Hauer
• [PATCH] ARM OMAP5: Basic support of Texas Instruments OMAP5 processors   Uladzimir Bely
  • [PATCH] ARM OMAP5: Basic support of Texas Instruments OMAP5 processors   Jan Lübbe
    • [PATCH] ARM OMAP5: Basic support of Texas Instruments OMAP5 processors   Jan Lübbe
      • [PATCH] ARM OMAP5: Basic support of Texas Instruments OMAP5 processors   Uladzimir Bely
  • [PATCH] ARM OMAP5: Basic support of Texas Instruments OMAP5 processors   Uladzimir Bely
• [PATCH] Added sd driver for bcm2835 (Raspberry PI)   wilhelm
  • [PATCH] Added sd driver for bcm2835 (Raspberry PI)   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH] Added sd driver for bcm2835 (Raspberry PI)   Sascha Hauer
    • [PATCH] Added sd driver for bcm2835 (Raspberry PI)   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH] Added sd driver for bcm2835 (Raspberry PI)   wilhelm
• [PATCH] mci: factor out common SDHCI register defines   Sascha Hauer
  • [PATCH 1/2] mci: imx-esdhc: remove cache snoop register access   Sascha Hauer
  • [PATCH 2/2] mci: imx-esdhc: factor out common sdhci registers   Sascha Hauer
• [PATCH 1/1] mci: add Secure Digital Host Controller Interface support   Jean-Christophe PLAGNIOL-VILLARD
  • Re: [PATCH 1/1] mci: add Secure Digital Host Controller Interface support   Alexander Shiyan
  • [PATCH 1/1] mci: add Secure Digital Host Controller Interface support   Sascha Hauer
    • [PATCH 1/1] mci: add Secure Digital Host Controller Interface support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: OMAP5 processors support   Uladzimir Bely
  • [PATCH] ARM: OMAP5 processors support   Uladzimir Bely
  • [PATCH] ARM: OMAP5 processors support   Sascha Hauer
    • [PATCH] ARM: OMAP5 processors support   Uladzimir Bely
      • [PATCH] ARM: OMAP5 processors support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH] ARM: OMAP5 processors support   Jan Lübbe
      • [PATCH] ARM: OMAP5 processors support   Uladzimir Bely
      • [PATCH] ARM: OMAP5 processors support   Sascha Hauer
      • [PATCH] ARM: OMAP5 processors support   Jan Lübbe
      • [PATCH] ARM: OMAP5 processors support   Jan Lübbe
      • [PATCH] ARM: OMAP5 processors support   Uladzimir Bely
      • [PATCH] ARM: OMAP5 processors support   Sascha Hauer
      • [PATCH] ARM: OMAP5 processors support   menon.nishanth at gmail.com
• [PATCH] of: fix how an initrd is passed to Linux   Uwe Kleine-König
  • [PATCH] of: fix how an initrd is passed to Linux   Uwe Kleine-König
    • [PATCH] of: fix how an initrd is passed to Linux   Sascha Hauer
• [PATCH] of: property: fix error message   Steffen Trumtrar
  • [PATCH] of: property: fix error message   Sascha Hauer
• [PATCH] of: fix typos   Antony Pavlov
  • [PATCH] of: fix typos   Sascha Hauer
• OTG Device mode on i.MX51   Alexander Shiyan
• [PATCH] ARM: ccxmx51: Fix OTG Host USB mode   Alexander Shiyan
  • [PATCH] ARM: ccxmx51: Fix OTG Host USB mode   Sascha Hauer
• Some fixes and improvements while working with the Chumby   Juergen Beisert
  • [PATCH 1/6] MXS/MCI: add forgotten header file   Juergen Beisert
  • [PATCH 2/6] MXS/MCI: don't touch variables in the host structure   Juergen Beisert
  • [PATCH 3/6] MCI/Core: increase the transmission frequency while card detection   Juergen Beisert
  • [PATCH 4/6] MCI/Core: honor transmission limits at the card's side   Juergen Beisert
  • [PATCH 5/6] MCI/MXS: report a better matching error code when the transfer fails   Juergen Beisert
  • [PATCH 6/6] MCI/Core: move an ugly ifdef to the header file   Juergen Beisert
    • [PATCH 6/6] MCI/Core: move an ugly ifdef to the header file   Sascha Hauer
  • Some fixes and improvements while working with the Chumby   Sascha Hauer
• [RFC only] ARM: i.MX: Fix SDRAM size detect   Alexander Shiyan
  • [RFC only] ARM: i.MX: Fix SDRAM size detect   Sascha Hauer
    • Re[2]: [RFC only] ARM: i.MX: Fix SDRAM size detect   Alexander Shiyan
      • [RFC only] ARM: i.MX: Fix SDRAM size detect   Sascha Hauer
      • Re[2]: [RFC only] ARM: i.MX: Fix SDRAM size detect   Alexander Shiyan
      • [PATCH] Fix ccxmx51 SDRAM size detection   Sascha Hauer
      • [PATCH 1/2] ARM: i.MX: Allow disabling SDRAM autodetection   Sascha Hauer
      • [PATCH 2/2] ARM: i.MX: ccxmx51: detect SDRAM size by board id   Sascha Hauer
      • Re: [PATCH] Fix ccxmx51 SDRAM size detection   Alexander Shiyan
• [PATCH] ARM: mmu: Use PAGE_ALIGN in dma_free_coherent   Jan Weitzel
  • [PATCH] ARM: mmu: Use PAGE_ALIGN in dma_free_coherent   Sascha Hauer
• [PATCH 1/9] console: Fix possible null pointer dereference   Alexander Shiyan
  • [PATCH 3/9] ARM: at91 smc: Fix possible uninitialized variable   Alexander Shiyan
    • [PATCH 3/9] ARM: at91 smc: Fix possible uninitialized variable   Jean-Christophe PLAGNIOL-VILLARD
      • Re[2]: [PATCH 3/9] ARM: at91 smc: Fix possible uninitialized variable   Alexander Shiyan
      • [PATCH 3/9] ARM: at91 smc: Fix possible uninitialized variable   Sascha Hauer
  • [PATCH 4/9] MCI: atmel: Fix possible null pointer dereference   Alexander Shiyan
  • [PATCH 5/9] MCI: imx-esdhc: Fix possible null pointer dereference   Alexander Shiyan
    • [PATCH 5/9] MCI: imx-esdhc: Fix possible null pointer dereference   Sascha Hauer
      • Re[2]: [PATCH 5/9] MCI: imx-esdhc: Fix possible null pointer dereference   Alexander Shiyan
  • [PATCH 6/9] MCI: imx: Fix possible null pointer dereference   Alexander Shiyan
  • [PATCH 7/9] NAND: imx: Fix memory leak   Alexander Shiyan
  • [PATCH 8/9] Serial: mpc5xxx: Fix setup mode at port initialization   Alexander Shiyan
    • [PATCH 8/9] Serial: mpc5xxx: Fix setup mode at port initialization   Sascha Hauer
      • Re[2]: [PATCH 8/9] Serial: mpc5xxx: Fix setup mode at port initialization   Alexander Shiyan
  • [PATCH 9/9] MCI: imx-esdhc: Remove now unneeded check   Alexander Shiyan
    • [PATCH 9/9] MCI: imx-esdhc: Remove now unneeded check   Sascha Hauer
• [PATCH 2/9] ARM: at91 gpio: Fix possible null pointer dereference   Alexander Shiyan
  • [PATCH 2/9] ARM: at91 gpio: Fix possible null pointer dereference   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 2/9] ARM: at91 gpio: Fix possible null pointer dereference   Sascha Hauer
• [PATCH 1/2] ARM: Make OMAP syslib.c functions available for other ARM targets   Alexander Shiyan
• [PATCH 2/2] ARM: Use syslib instead of using private functions   Alexander Shiyan
• [PATCH 1/4] ata: Remove wrong DISK_DRIVE symbol   Alexander Shiyan
  • [PATCH 2/4] ARM: omap: Remove wrong OMAP_CLOCK_ALL symbol   Alexander Shiyan
  • [PATCH 3/4] ARM: netx: Remove references for missing boards   Alexander Shiyan
  • [PATCH 4/4] ARM: imx: Fix incorrect Kconfig symbols for some boards   Alexander Shiyan
  • [PATCH 1/4] ata: Remove wrong DISK_DRIVE symbol   Sascha Hauer

Last message date: Tue Apr 30 03:46:33 EDT 2013
Archived on: Tue Apr 30 03:47:02 EDT 2013

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...