Re[2]: Boot from SD fail after 2013.02

[Alexander Shiyan]

> On Wed, Apr 17, 2013 at 03:40:29PM +0400, Alexander Shiyan wrote:
> > > On Wed, Apr 17, 2013 at 12:40:21PM +0400, Alexander Shiyan wrote:
> > > >  Hello.
> > > > 
> > > > I found strange problem with boot from SD after 2013.02 release.
> > > > Using a git-bisect I found problem start point, so:
> > > > 
> > > > 8e19ee94ab7aea50635845de31daef1b593e1205 is the first bad commit
> > > > commit 8e19ee94ab7aea50635845de31daef1b593e1205
> > > > Author: Sascha Hauer <s.hauer at pengutronix.de>
> > > > Date:   Fri Jan 25 23:39:20 2013 +0100
> > > > 
> > > >     ARM: Setup stack at end of SDRAM
> > > >     
> > > >     Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> > > > 
> > > > 
> > > > Exploring this commit does not helps me to have any idea how it
> > > > depends on SD-boot.
> > > > My target is ARM imx51 ConnectCore board.
> > > > Also I test it with freescale_mx51_babbage_defconfig since some
> > > > stuff is compatible with ConnectCore board.
> > > > Can anyone confirm this issue or have a solution?
> > > 
> > > Without this patch applied, can you post the output of the 'iomem'
> > > command and confirm that the SDRAM size is detected correctly?
> > 
> > Memory size is correct, 256M. At this time I cannot run "iomem" since
> > I am restore the faulty part as a result of my games.
> 
> Does barebox still work 2nd stage or is this a 1st stage only problem?

PBL is not used in my config now and I think this is a lowlevel stuff
because serial is not inited and I cannot see any message.
I any case I cannot test more now due broken hardware. I return to
test this after repair. Thanks!

---