[PATCH 3/4] ARM: tx53: use early lowlevel function

[Sascha Hauer]

The tx53 calls imx53_init_lowlevel from early code, so use
imx53_init_lowlevel_early instead.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 arch/arm/boards/karo-tx53/lowlevel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boards/karo-tx53/lowlevel.c b/arch/arm/boards/karo-tx53/lowlevel.c
index 32d2c8f..f47f260 100644
--- a/arch/arm/boards/karo-tx53/lowlevel.c
+++ b/arch/arm/boards/karo-tx53/lowlevel.c
@@ -14,7 +14,7 @@ void __naked barebox_arm_reset_vector(void)
 	 * so do the PLL setup here.
 	 */
 	if (IS_ENABLED(CONFIG_TX53_REV_XX30))
-		imx53_init_lowlevel(800);
+		imx53_init_lowlevel_early(800);
 
 	imx53_barebox_entry(0);
 }
-- 
1.8.2.rc2