[PATCH v3 08/10] tegra: add generic debug UART support

[antonynpavlov at gmail.com]

On Mon, 08 Apr 2013 12:57:26 +0200
Lucas Stach <dev at lynxeye.de> wrote:

> Hi Antony,
> 
> Am Freitag, den 05.04.2013, 00:32 +0400 schrieb antonynpavlov at gmail.com:
> > On Tue,  2 Apr 2013 08:19:10 +0200
> > Lucas Stach <dev at lynxeye.de> wrote:
> > 
> > > ODMdata tells us which UART to use for debugging purposes. This is
> > > agreed upon in both the upstream Linux kernel and U-Boot, so do it the
> > > same way in barebox.
> > 
> > This patch disables serial console on my Toshiba AC100.
> > 
> Hm that's unfortunate, but I already suspected that your ODMdata might
> be wrong.
> What happens if you don't remove the serial init in your board? Do you
> get a duplicate serial, or just your board defined one? If it still
> works for you this way, we might take this as a compromise for now.

IMHO, the right way is to get of_serial.c from linux and put some records 
like this 
 uarta: serial at 70006000 {
                compatible = "nvidia,tegra20-uart";
                reg = <0x70006000 0x40>;
                reg-shift = <2>;
                interrupts = <0 36 0x04>;
                nvidia,dma-request-selector = <&apbdma 8>;
                clocks = <&tegra_car 6>;
                status = "disabled";
  };

to arch/arm/dts/tegra20.dtsi.

-- 
-- 
Best regards,
  Antony Pavlov