[PATCH] mtdraw: fix oob read and write

[Sascha Hauer]

On Thu, Apr 11, 2013 at 02:04:51PM +0200, Eric Bénard wrote:
> actually ops.ooboffs is not defaulted so when its value gets
> added to chip->oob_poi in nand_fill_oob or nand_transfer_oob
> the respective memcpy is using a wrong address.
> 
> With this patch, both md -s /dev/nandraw0 and cp xyz /dev/nandraw0.sb
> are working fine on an i.MX28 target (instead of crashing the board).
> 
> Signed-off-by: Eric Bénard <eric at eukrea.com>

Applied, thanks

Sascha

> ---
>  drivers/mtd/mtdraw.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/mtd/mtdraw.c b/drivers/mtd/mtdraw.c
> index 384104e..c289e8d 100644
> --- a/drivers/mtd/mtdraw.c
> +++ b/drivers/mtd/mtdraw.c
> @@ -98,6 +98,7 @@ static ssize_t mtdraw_read_unaligned(struct mtd_info *mtd, void *dst,
>  	if (!tmp)
>  		return -ENOMEM;
>  	ops.mode = MTD_OOB_RAW;
> +	ops.ooboffs = 0;
>  	ops.datbuf = tmp;
>  	ops.len = mtd->writesize;
>  	ops.oobbuf = tmp + mtd->writesize;
> @@ -152,6 +153,7 @@ static ssize_t mtdraw_blkwrite(struct mtd_info *mtd, const void *buf,
>  	int ret;
>  
>  	ops.mode = MTD_OOB_RAW;
> +	ops.ooboffs = 0;
>  	ops.datbuf = (void *)buf;
>  	ops.len = mtd->writesize;
>  	ops.oobbuf = (void *)buf + mtd->writesize;
> -- 
> 1.7.11.7
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |