September 2012 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Sat Sep 1 04:47:28 EDT 2012
Ending: Sun Sep 30 12:00:06 EDT 2012
Messages: 1041

• [for master PATCH 1/2] miidev: add phy_addr detection support   Jean-Christophe PLAGNIOL-VILLARD
• [for master PATCH 1/2] miidev: add phy_addr detection support   Sascha Hauer
• [for master PATCH 1/2] miidev: add phy_addr detection support   Jean-Christophe PLAGNIOL-VILLARD
• [for master PATCH 1/2] miidev: add phy_addr detection support   Sascha Hauer
• [for master PATCH 1/2] miidev: add phy_addr detection support   Jean-Christophe PLAGNIOL-VILLARD
• [for master PATCH 2/2] calao: at91 qil/tny/usb auto detect the phy addr   Jean-Christophe PLAGNIOL-VILLARD
• [For next PATCH 1/1] defaultenv: fix typo in dhco bootp oftree   Jean-Christophe PLAGNIOL-VILLARD
• [For next PATCH 1/1] defaultenv: fix typo in dhco bootp oftree   Sascha Hauer
• [for next PATCH 1/1] macb: fix typos in the phy_interface   Jean-Christophe PLAGNIOL-VILLARD
• [for next PATCH 1/1] macb: fix typos in the phy_interface   Sascha Hauer
• [PATCH 0/1 v5] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/1 v6] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/1 v7] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/1 v7] net: introduce phylib   Sascha Hauer
• [PATCH 0/1 v7] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/1 v7] net: introduce phylib   Jan Lübbe
• [PATCH 0/1 v7] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/1 v7] net: introduce phylib   Sascha Hauer
• [PATCH 0/1 v7] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/1 v7] net: introduce phylib   Sascha Hauer
• [PATCH 0/1 v7] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] P2020RDB eTSEC2   Renaud Barbier
• [PATCH 0/2] P2020RDB eTSEC2   Sascha Hauer
• [PATCH 0/3] AMBA Bus support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/3] final bus cleanup   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/3] final bus cleanup   Sascha Hauer
• [PATCH 0/3 v2] AMBA Bus support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/3 v2] AMBA Bus support   Sascha Hauer
• [PATCH 0/3 v3] net: check error and introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/3 v4] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/4 v2] fs/mount: add autodetection support   Sascha Hauer
• [PATCH 0/5] at91 framebuffer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/5] gianfar: mdio bus support   Renaud Barbier
• [PATCH 0/5 v2] at91 framebuffer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/5 v2] sandbox fix + bus   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/6] gui: factorise code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/6] gui: factorise code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/6 v3] sandbox fix + bus   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/6 v3] sandbox fix + bus   Sascha Hauer
• [PATCH 0/7] [RFC][PATCH] archosg9: add support for tablet   vj
• [PATCH 0/7] [RFC][PATCH] archosg9: add support for tablet   Antony Pavlov
• [PATCH 0/7] [RFC][PATCH] archosg9: add support for tablet   Sascha Hauer
• [PATCH 0/7] [RFC][PATCH] archosg9: add support for tablet   Sascha Hauer
• [PATCH 0/7] [RFC][PATCH] archosg9: add support for tablet   vj
• [PATCH 0/7] dhcp: update to globalvar   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/7 v2] defaultenv-2: add boot sequence   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/7 v2] dhcp: update to globalvar   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/7 v2] dhcp: update to globalvar   Sascha Hauer
• [PATCH 0/7 v3] smsc911x: runtime configuration improvement   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/7 v3] smsc911x: runtime configuration improvement   Sascha Hauer
• [PATCH 0/7 v4] defaultenv-2: add boot sequence   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/9] archosg9: add support for tablet, second round   vj
• [PATCH 00/11 v2] add PNG support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/11 v2] defaultenv-2: add bootp support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/11 v3] add PNG support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/11 v4] add PNG support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/12] add PNG support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/12] add PNG support   Eric Bénard
• [PATCH 00/12] add PNG support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/12] add PNG support   Eric Bénard
• [PATCH 00/12] add PNG support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/12] add PNG support   Eric Bénard
• [PATCH 00/12] add PNG support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/12] add PNG support   Eric Bénard
• [PATCH 00/12] add PNG support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/12] add PNG support   Eric Bénard
• [PATCH 00/12] add PNG support   Sascha Hauer
• [PATCH 00/12] add PNG support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/12] add PNG support   Sascha Hauer
• [PATCH 00/12] add PNG support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/18 v2] fs: add symlink and readlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/18 v2] fs: add symlink and readlink support   Sascha Hauer
• [PATCH 00/18 v2] fs: add symlink and readlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/18 v3] fs: add symlink and readlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/18 v3] fs: add symlink and readlink support   Sascha Hauer
• [PATCH 00/18 v3] fs: add symlink and readlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/18 v3] fs: add symlink and readlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/18 v3] fs: add symlink and readlink support   Sascha Hauer
• [PATCH 00/18 v5] fs: add symlink and readlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/10] add gpiolib support   Sascha Hauer
• [PATCH 01/10] add gpiolib support   Sascha Hauer
• [PATCH 01/10] drivers/nor/m25p80: add JEDEC ID for Micron/Numonyx SPI NOR flash   Jan Luebbe
• [PATCH 01/11] bmp: rename it to splash   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/11] bmp: rename it to splash   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/11] bmp: rename it to splash   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/11] defaultenv: enable glovalvar support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/12] add barebox logo   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/12] add barebox logo   Jan Lübbe
• [PATCH 01/12] add barebox logo   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/12] add barebox logo   Eric Bénard
• [PATCH 01/12] add barebox logo   Sascha Hauer
• [PATCH 01/14] ARM i.MX31: give register base addresses a proper MX31_ prefix   Sascha Hauer
• [PATCH 01/15] driver: add dev_get_drvdata function   Sascha Hauer
• [PATCH 01/18] fs: add readlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/18] fs: add readlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/18] fs: add readlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/18 v4] fs: add readlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/19] fs: add readlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/23] err.h: introduce IS_ERR_OR_NULL   Sascha Hauer
• [PATCH 02/10] drivers/nor/m25p80: add MEMGETINFO ioctl   Jan Luebbe
• [PATCH 02/10] drivers/nor/m25p80: add MEMGETINFO ioctl   Sascha Hauer
• [PATCH 02/11] bmp: split bmp rending in lib/bmp.c   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/11] bmp: split bmp rending in lib/bmp.c   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/11] bmp: split bmp rending in lib/bmp.c   Sascha Hauer
• [PATCH 02/11] bmp: split bmp rending in lib/bmp.c   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/11] bmp: split bmp rending in lib/bmp.c   Sascha Hauer
• [PATCH 02/11] bmp: split bmp rending in lib/bmp.c   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/11] bmp: split bmp rending in lib/bmp.c   Sascha Hauer
• [PATCH 02/11] defaultenv: switch hostname to global.hostname   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/12] bmp: rename it to splash   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/14] ARM i.MX35: give register base addresses a proper MX35_ prefix   Sascha Hauer
• [PATCH 02/15] of: add devicetree probing support   Sascha Hauer
• [PATCH 02/15] of: add devicetree probing support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/18] fs: rename stat to lstat as we implement lstat   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/18] fs: rename stat to lstat as we implement lstat   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/19] fs: fix rmdir with symlink   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/23] clk clkdev: Add clkdev matching based on physbase   Sascha Hauer
• [PATCH 02/23] clk clkdev: Add clkdev matching based on physbase   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/23] clk clkdev: Add clkdev matching based on physbase   Sascha Hauer
• [PATCH 02/23] clk clkdev: Add clkdev matching based on physbase   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/23] clk clkdev: Add clkdev matching based on physbase   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/23] clk clkdev: Add clkdev matching based on physbase   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/23] clk clkdev: Add clkdev matching based on physbase   Sascha Hauer
• [PATCH 03/10] ARM i.MX5: add imx-gpio devices   Sascha Hauer
• [PATCH 03/10] Makefile: add target to produce a SPL compatible uimage   Jan Luebbe
• [PATCH 03/10] Makefile: add target to produce a SPL compatible uimage   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/11] dhcp: switch to global var support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/11] Introduce graphic utils   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/11] introduce image_renderer framework   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/11] introduce image_renderer framework   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/12] bmp: split bmp rending in lib/bmp.c   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/14] ARM i.MX21: give register base addresses a proper MX21_ prefix   Sascha Hauer
• [PATCH 03/15] oftree command: Add devicetree probe support   Sascha Hauer
• [PATCH 03/18] fs: add symlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/18] fs: add symlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/18] fs: add symlink support   Sascha Hauer
• [PATCH 03/18] fs: add symlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/18] fs: add symlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/19] fs: rename stat to lstat as we implement lstat   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/23] clk: initial common clk support   Sascha Hauer
• [PATCH 04/10] scripts: add tool to create image for SPI boot on AM35xx   Jan Luebbe
• [PATCH 04/10] scripts: add tool to create image for SPI boot on AM35xx   Sascha Hauer
• [PATCH 04/11] dhcp: add copy_only_if_valid support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/11] filetype: add BMP support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/11] filetype: add BMP support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/11] introduce image_renderer framework   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/12] introduce image_renderer framework   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/12] introduce image_renderer framework   Jan Lübbe
• [PATCH 04/14] ARM i.MX1: give register base addresses a proper MX1_ prefix   Sascha Hauer
• [PATCH 04/15] of: Add devicetree partition parsing   Sascha Hauer
• [PATCH 04/18] fs: implement stat   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/18] fs: implement stat   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/18] fs: implement stat   Sascha Hauer
• [PATCH 04/18] fs: implement stat   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/19] fs: add symlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/23] commands: Add clk commands   Sascha Hauer
• [PATCH 05/10] common: split out meminfo output and make it optional   Jan Luebbe
• [PATCH 05/11] dhcp: add retries limit support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/11] filetype: add BMP support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/11] filetype: add BMP support   Sascha Hauer
• [PATCH 05/11] splash/bmp: switch to image_renderer   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/11] splash/bmp: switch to image_renderer   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/12] filetype: add BMP support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] ARM i.MX27: give register base addresses a proper MX27_ prefix   Sascha Hauer
• [PATCH 05/15] spi: add oftree support   Sascha Hauer
• [PATCH 05/18] fs: open: add symlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/18] fs: open: add symlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/19] fs: implement stat   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/23] ARM i.MX: initial clk support   Sascha Hauer
• [PATCH 06/10] omap: add SPI as a boot mode for xload   Jan Luebbe
• [PATCH 06/10] omap: add SPI as a boot mode for xload   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/10] omap: add SPI as a boot mode for xload   Jan Weitzel
• [PATCH 06/11] defaultenv-2: eth0 add default global.dhcp.vendor_id   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/11] splash/bmp: switch to image_renderer   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/11] splash: add support to set a background color   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/11] splash: add support to set a background color   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/11] splash: add support to set a background color   Sascha Hauer
• [PATCH 06/12] splash/bmp: switch to image_renderer   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/14] ARM i.MX25: give register base addresses a proper MX25_ prefix   Sascha Hauer
• [PATCH 06/15] ARM i.MX: Use platform_device_id for gpio driver   Sascha Hauer
• [PATCH 06/18] fs: introduce get_mounted_path to get the path where a file is mounted   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/18] fs: introduce get_mounted_path to get the path where a file is mounted   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/18] fs: introduce get_mounted_path to get the path where a file is mounted   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/19] fs: open: add symlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/23] ARM i.MX27: implement clk support   Sascha Hauer
• [PATCH 07/10] drivers/net/ksz8864rmn: add driver for Micrel KSZ8864RMN Ethernet Switch   Jan Luebbe
• [PATCH 07/11] defaultenv-2/ip: add dhcp-barebox support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/11] defaultenv-2/ip: add dhcp-barebox support   Sascha Hauer
• [PATCH 07/11] defaultenv-2/ip: add dhcp-barebox support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/11] Introduce graphic utils   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/11] Introduce graphic utils   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/11] Introduce graphic utils   Sascha Hauer
• [PATCH 07/11] splash: add support to set a background color   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/12] splash: add support to set a background color   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/14] ARM i.MX/MXS: Allow to include imx*-regs.h directly   Sascha Hauer
• [PATCH 07/15] ARM i.MX: implement clocksource as driver   Sascha Hauer
• [PATCH 07/15] ARM i.MX: implement clocksource as driver   Sascha Hauer
• [PATCH 07/18] ramfs: add symlink and readlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/18] ramfs: add symlink and readlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/19] fs: introduce get_mounted_path to get the path where a file is mounted   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/23] ARM i.MX25: Switch to common clk support   Sascha Hauer
• [PATCH 08/10] drivers/net: add driver for the EMAC device found in some TI SoCs   Jan Luebbe
• [PATCH 08/10] drivers/net: add driver for the EMAC device found in some TI SoCs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/10] drivers/net: add driver for the EMAC device found in some TI SoCs   Sascha Hauer
• [PATCH 08/11] defaultenv-2: add ifdown support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/11] graphic_utils: add rgba support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/11] graphic_utils: add rgba support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/11] graphic_utils: add rgba support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/12] Introduce graphic utils   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/14] ARM i.MX51: Use defines rather than hardcoded addresses   Sascha Hauer
• [PATCH 08/15] serial i.MX: oftree support   Sascha Hauer
• [PATCH 08/18] nfs: add readlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/18] nfs: add readlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/19] ramfs: add symlink and readlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/23] ARM i.MX5: Switch to common clk support   Sascha Hauer
• [PATCH 08/23] ARM i.MX5: Switch to common clk support   Sascha Hauer
• [PATCH 09/10] omap3: allow enabling clocks for UART3, MMC1 and SPI   Jan Luebbe
• [PATCH 09/10] omap3: allow enabling clocks for UART3, MMC1 and SPI   Sascha Hauer
• [PATCH 09/10] omap3: allow enabling clocks for UART3, MMC1 and SPI   Jan Lübbe
• [PATCH 09/11] defaultenv-2: boot/net add bootp support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/11] defaultenv-2: boot/net add bootp support   Sascha Hauer
• [PATCH 09/11] defaultenv-2: boot/net add bootp support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/11] defaultenv-2: boot/net add bootp support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/11] defaultenv-2: boot/net add bootp support   Sascha Hauer
• [PATCH 09/11] defaultenv-2: boot/net add bootp support   Sascha Hauer
• [PATCH 09/11] defaultenv-2: boot/net add bootp support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/11] defaultenv-2: boot/net add bootp support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/11] defaultenv-2: boot/net add bootp support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/11] defaultenv-2: boot/net add bootp support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/11] defaultenv-2: boot/net add bootp support   Sascha Hauer
• [PATCH 09/11] defaultenv-2: boot/net add bootp support   Sascha Hauer
• [PATCH 09/11] defaultenv-2: boot/net add bootp support   Sascha Hauer
• [PATCH 09/11] defaultenv-2: boot/net add bootp support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/11] defaultenv-2: boot/net add bootp support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/11] defaultenv-2: boot/net add bootp support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/11] defaultenv-2: boot/net add bootp support   Sascha Hauer
• [PATCH 09/11] defaultenv-2: boot/net add bootp support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/11] defaultenv-2: boot/net add bootp support   Sascha Hauer
• [PATCH 09/11] defaultenv-2: boot/net add bootp support   Sascha Hauer
• [PATCH 09/11] filetype: add PNG support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/11] filetype: add PNG support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/11] filetype: add PNG support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/11] filetype: add PNG support   Sascha Hauer
• [PATCH 09/12] graphic_utils: add rgba support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/14] ARM i.MX: Add header file for WEIM cs setup   Sascha Hauer
• [PATCH 09/15] net fec_imx: oftree support   Sascha Hauer
• [PATCH 09/18] test: add -L support to test if it's a symbolic link   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/18] test: add -L support to test if it's a symbolic link   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/19] nfs: add readlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/23] ARM i.MX1: Switch to common clk support   Sascha Hauer
• [PATCH 1/1] add barebox logo   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] add barebox logo   Sascha Hauer
• [PATCH 1/1] arm: armlinux: get the architecture before shutdown barebox   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] arm: armlinux: get the architecture before shutdown barebox   Sascha Hauer
• [PATCH 1/1] defaultenv-2: execute init/* before timeout   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] defaultenv-2: execute init/* before timeout   Sascha Hauer
• [PATCH 1/1] defaultenv-2: execute init/* before timeout   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] defaultenv-2: execute init/* before timeout   Sascha Hauer
• [PATCH 1/1] defaultenv-2: move settings in a submenu   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] defconfig: substitute '-' to '_' in defconfig name so MAKEALL can work   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] defconfig: substitute '-' to '_' in defconfig name so MAKEALL can work   Sascha Hauer
• [PATCH 1/1] defconfig: substitute '-' to '_' in defconfig name so MAKEALL can work   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] defconfig: substitute '-' to '_' in defconfig name so MAKEALL can work   Sascha Hauer
• [PATCH 1/1] fb: add it's own bus for fb devices   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] fb: add it's own bus for fb devices   Sascha Hauer
• [PATCH 1/1] fs/nfs: fix read when size < 1024   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] fs/nfs: fix read when size < 1024   Sascha Hauer
• [PATCH 1/1] genenv: fix files copy   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] genenv: fix files copy   Sascha Hauer
• [PATCH 1/1] mci_spi: fix missing switch to spi_register_driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] mci_spi: fix missing switch to spi_register_driver   Sascha Hauer
• [PATCH 1/1] net/eth: fix link handling   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] net/eth: fix link handling   Sascha Hauer
• [PATCH 1/1] net/eth: fix link handling   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] net: add multiple nameserver support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] net: add multiple nameserver support   Christoph Fritz
• [PATCH 1/1] net: add multiple nameserver support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] net: introduce phylib   Sascha Hauer
• [PATCH 1/1] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] net: introduce phylib   Sascha Hauer
• [PATCH 1/1] net: introduce phylib   Sascha Hauer
• [PATCH 1/1] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] net: introduce phylib   Sascha Hauer
• [PATCH 1/1] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] net: introduce phylib   Sascha Hauer
• [PATCH 1/1] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] nhk8815: fix nand IO_DATA end resource   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] nhk8815: fix nand IO_DATA end resource   Sascha Hauer
• [PATCH 1/1] sandbox: add sdl video support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] sandbox: add sdl video support   Sascha Hauer
• [PATCH 1/1] sandbox: check only image option in the second getopt   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] smc911x: fix typo pn check if the device is ready before using it   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] smc911x: fix typo pn check if the device is ready before using it   Sascha Hauer
• [PATCH 1/1] tap: fix missing parent setting on eth_device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] tap: fix missing parent setting on eth_device   Sascha Hauer
• [PATCH 1/1] uncompress: drop wrong BUG(uncompress_size)   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] uncompress: drop wrong BUG(uncompress_size)   Sascha Hauer
• [PATCH 1/1 for master] MAKEALL: accept defconfig with '-' in it   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1 for master] MAKEALL: accept defconfig with '-' in it   Sascha Hauer
• [PATCH 1/1 v2] genenv: Allow to also specify files for the environment instead of only directories   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1 v2] genenv: Allow to also specify files for the environment instead of only directories   Sascha Hauer
• [PATCH 1/1 v2] net/eth: fix link handling   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1 v3] bootm: add global bootm.{image/initrd}.loadaddr support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1 v3] bootm: add global bootm.{image/initrd}.loadaddr support   Sascha Hauer
• [PATCH 1/1 v3] bootm: add global bootm.{image/initrd}.loadaddr support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] [v2] filetype: Improve FAT detection   Franck Jullien
• [PATCH 1/2] [v2] filetype: Improve FAT detection   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] [v2] filetype: Improve FAT detection   Franck Jullien
• [PATCH 1/2] [v2] filetype: Improve FAT detection   Sascha Hauer
• [PATCH 1/2][v2] net: add nameserver IPs to kernel-parameter ip=   Christoph Fritz
• [PATCH 1/2][v2] net: add nameserver IPs to kernel-parameter ip=   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] [v3] filetype: Improve FAT detection   Franck Jullien
• [PATCH 1/2] [v3] filetype: Improve FAT detection   Sascha Hauer
• [PATCH 1/2] [v3] filetype: Improve FAT detection   Franck Jullien
• [PATCH 1/2] [v3] filetype: Improve FAT detection   Sascha Hauer
• [PATCH 1/2] [v4] filetype: Improve FAT detection   Franck Jullien
• [PATCH 1/2] [v4] filetype: Improve FAT detection   Sascha Hauer
• [PATCH 1/2] Add bcm2835/Raspberry-Pi support   Carlo Caione
• [PATCH 1/2] Add bcm2835/Raspberry-Pi support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] Add bcm2835/Raspberry-Pi support   Juergen Beisert
• [PATCH 1/2] Add bcm2835/Raspberry-Pi support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] Add bcm2835/Raspberry-Pi support   Juergen Beisert
• [PATCH 1/2] Add bcm2835/Raspberry-Pi support   Jan Lübbe
• [PATCH 1/2] Add bcm2835/Raspberry-Pi support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] Add bcm2835/Raspberry-Pi support   Carlo Caione
• [PATCH 1/2] Add bcm2835/Raspberry-Pi support   Jan Lübbe
• [PATCH 1/2] Add bcm2835/Raspberry-Pi support   Carlo Caione
• [PATCH 1/2] Add bcm2835/Raspberry-Pi support   Marc Kleine-Budde
• [PATCH 1/2] Add bcm2835/Raspberry-Pi support   Carlo Caione
• [PATCH 1/2] Add bcm2835/Raspberry-Pi support   Marc Kleine-Budde
• [PATCH 1/2] Add bcm2835/Raspberry-Pi support   Thomas Petazzoni
• [PATCH 1/2] Add bcm2835/Raspberry-Pi support   Jan Lübbe
• [PATCH 1/2] Add bcm2835/Raspberry-Pi support   Carlo Caione
• [PATCH 1/2] ARM i.MX6: add usb function prototypes   Steffen Trumtrar
• [PATCH 1/2] ARM i.MX6: add usb function prototypes   Sascha Hauer
• [PATCH 1/2] ARM i.MX: Add Ka-Ro TX53 board support   Sascha Hauer
• [PATCH 1/2] calao: at91 qil/tny/usb auto detect the phy addr   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] Calao boards: enable the pbl   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] Calao boards: enable the pbl   Sascha Hauer
• [PATCH 1/2] driver: register bus   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] drivers/nor/m25p80: add MTD support   Jan Luebbe
• [PATCH 1/2] drivers/nor/m25p80: add MTD support   Sascha Hauer
• [PATCH 1/2] drivers gpio: Check for negativ gpio values   Teresa Gámez
• [PATCH 1/2] drivers gpio: Check for negativ gpio values   Jan Lübbe
• [PATCH 1/2] drivers gpio: Check for negativ gpio values   Teresa Gamez
• [PATCH 1/2] drivers gpio: Check for negativ gpio values   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] filetype: Improve FAT detection   Franck Jullien
• [PATCH 1/2] filetype: Improve FAT detection   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] gianfar: region request returns NULL on already mapped region   Renaud Barbier
• [PATCH 1/2] kbuild: keep the barebox binary accessible   Jan Luebbe
• [PATCH 1/2] kbuild: keep the barebox binary accessible   Sascha Hauer
• [PATCH 1/2] libbb: remove vi tabwidth setting   Alexander Aring
• [PATCH 1/2] libbb: remove vi tabwidth setting   Sascha Hauer
• [PATCH 1/2] mtd: fix compiler warnings   Alexander Aring
• [PATCH 1/2] mtd: fix compiler warnings   Sascha Hauer
• [PATCH 1/2] mtd: fix compiler warnings   Jan Lübbe
• [PATCH 1/2] mtd: fix compiler warnings   Alexander Aring
• [PATCH 1/2] net: add nameserver IPs to kernel-parameter ip=   Christoph Fritz
• [PATCH 1/2] net: add nameserver IPs to kernel-parameter ip=   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] xload: make internal functions static   Jan Luebbe
• [PATCH 1/2] xload: make internal functions static   Sascha Hauer
• [PATCH 1/3] [OpenRISC] Add __ashrdi3 and remove link to libgcc   Franck Jullien
• [PATCH 1/3] [OpenRISC] Add __ashrdi3 and remove link to libgcc   Sascha Hauer
• [PATCH 1/3] Add barebox update infrastructure   Sascha Hauer
• [PATCH 1/3] Add barebox update infrastructure   Jan Weitzel
• [PATCH 1/3] Add barebox update infrastructure   Sascha Hauer
• [PATCH 1/3] Add support for creating barebox.img file.   Teresa Gámez
• [PATCH 1/3] Add support for creating barebox.img file.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] ARM lowlevel: Update function documentation   Sascha Hauer
• [PATCH 1/3] ARM lowlevel: Update function documentation   Sascha Hauer
• [PATCH 1/3] commands: add testing menu   Alexander Aring
• [PATCH 1/3] commands: add testing menu   Sascha Hauer
• [PATCH 1/3] davinci_emac: return 0 on successful transmit   Jan Luebbe
• [PATCH 1/3] fb: move add param to bus probe   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] fec: restart autoneg at open instead of init   Eric Bénard
• [PATCH 1/3] fec: restart autoneg at open instead of init   Eric Bénard
• [PATCH 1/3] fec: restart autoneg at open instead of init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] fec: restart autoneg at open instead of init   Sascha Hauer
• [PATCH 1/3] fec: restart autoneg at open instead of init   Eric Bénard
• [PATCH 1/3] fec: restart autoneg at open instead of init   Sascha Hauer
• [PATCH 1/3] fec: restart autoneg at open instead of init   Eric Bénard
• [PATCH 1/3] fec: restart autoneg at open instead of init   Sascha Hauer
• [PATCH 1/3] fec: restart autoneg at open instead of init   Eric Bénard
• [PATCH 1/3] Introduce ARM AMBA bus   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] Introduce ARM AMBA bus   Sascha Hauer
• [PATCH 1/3] Introduce ARM AMBA bus   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] net: Add tftp command which uses the new tftp code   Sascha Hauer
• [PATCH 1/3] net: Add tftp command which uses the new tftp code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] net: Add tftp command which uses the new tftp code   Sascha Hauer
• [PATCH 1/3] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] net: introduce phylib   Sascha Hauer
• [PATCH 1/3] net: introduce phylib   Sascha Hauer
• [PATCH 1/3] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] net: introduce phylib   Sascha Hauer
• [PATCH 1/3] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] net: introduce phylib   Sascha Hauer
• [PATCH 1/3] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] sandbox-unaligned: better usement of ifdef   Alexander Aring
• [PATCH 1/3] sandbox-unaligned: better usement of ifdef   Sascha Hauer
• [PATCH 1/3] sandbox: add asm-generic/io.h   Alexander Aring
• [PATCH 1/3] sandbox: add asm-generic/io.h   Sascha Hauer
• [PATCH 1/3] scripts/bareboxenv: Only print information if -v is given   Sascha Hauer
• [PATCH 1/3 v2] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3 v2] net: introduce phylib   Sascha Hauer
• [PATCH 1/3 v2] net: introduce phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3 v2] net: introduce phylib   Sascha Hauer
• [PATCH 1/4] ARM OMAP: remove SRAM stack   Jan Luebbe
• [PATCH 1/5] globalvar: add it's own bus   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] mfd mc13xxx: Separate I2C and SPI probe   Sascha Hauer
• [PATCH 1/5] phylib: bus reset function   Renaud Barbier
• [PATCH 1/5] phylib: bus reset function   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] phylib: bus reset function   Sascha Hauer
• [PATCH 1/5] phylib: bus reset function   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] phylib: bus reset function   Sascha Hauer
• [PATCH 1/5] phylib: bus reset function   Renaud Barbier
• [PATCH 1/5] phylib: bus reset function   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] sandbox: check only image option in the second getopt   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] video: add atmel lcdc frambuffer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] video: add atmel lcdc frambuffer support   Sascha Hauer
• [PATCH 1/5] video: add atmel lcdc frambuffer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] video: add atmel lcdc frambuffer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] video: add atmel lcdc frambuffer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] video: add atmel lcdc frambuffer support   Sascha Hauer
• [PATCH 1/5] video: add atmel lcdc frambuffer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/6] image_renderer: fix size type   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/6] sandbox: check only image option in the second getopt   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] dhcp: add global var support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] globalbar: add inline when not enabled   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] globalbar: add inline when not enabled   Sascha Hauer
• [PATCH 1/7] globalbar: add inline when not enabled   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] globalbar: add inline when not enabled   Sascha Hauer
• [PATCH 1/7] globalbar: add inline when not enabled   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] globalbar: add inline when not enabled   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] globalbar: add inline when not enabled   Sascha Hauer
• [PATCH 1/7] globalbar: add inline when not enabled   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] globalvar: add inline when not enabled   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] globalvar: add inline when not enabled   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] Improved an error message and solved a minor bug   vj
• [PATCH 1/7] Improved an error message and solved a minor bug   Sascha Hauer
• [PATCH 1/7] smc911x: move register define to smc911x.h   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/8] drivers/nor/m25p80: add JEDEC ID for Micron/Numonyx SPI NOR flash   Jan Luebbe
• [PATCH 1/9] ARM: set rev instead of returning it   vj
• [PATCH 10/10] drivers/spi: add driver for the Multichannel SPI controller found in TI SoCs   Jan Luebbe
• [PATCH 10/10] drivers/spi: add driver for the Multichannel SPI controller found in TI SoCs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/10] drivers/spi: add driver for the Multichannel SPI controller found in TI SoCs   Sascha Hauer
• [PATCH 10/10] drivers/spi: add driver for the Multichannel SPI controller found in TI SoCs   Jan Lübbe
• [PATCH 10/11] add PNG support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/11] add PNG support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/11] add PNG support   Sascha Hauer
• [PATCH 10/11] add PNG support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/11] defaultenv-2: add net boot support with kernel and oftree via nfs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/12] filetype: add PNG support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/14] ARM i.MX1: Add function to setup chipselect   Sascha Hauer
• [PATCH 10/15] spi imx: dt support   Sascha Hauer
• [PATCH 10/18] command: add readlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/18] command: add readlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/19] test: add -L support to test if it's a symbolic link   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/23] ARM i.MX31: Switch to common clk   Sascha Hauer
• [PATCH 11/11] defaultenv-2: add symbolic link support to boot/nfs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/11] defaultenv-2: add symbolic link support to boot/nfs   Sascha Hauer
• [PATCH 11/11] defaultenv-2: add symbolic link support to boot/nfs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/11] defaultenv-2: add symbolic link support to boot/nfs   Sascha Hauer
• [PATCH 11/11] png: add picoPNG lib support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/11] png: add picoPNG lib support   Vikram Narayanan
• [PATCH 11/11] png: add picoPNG lib support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/11] png: add picoPNG lib support   Sascha Hauer
• [PATCH 11/11] png: add picoPNG lib support   Peter Korsgaard
• [PATCH 11/11] png: add picoPNG lib support   Sascha Hauer
• [PATCH 11/11] png: add picoPNG lib support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/12] add PNG support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/14] ARM i.MX21: Add function to setup chipselect   Sascha Hauer
• [PATCH 11/15] mfd mc13xxx: Add devicetree support   Sascha Hauer
• [PATCH 11/18] command: add ln support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/18] command: add ln support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/19] command: add readlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/23] ARM i.MX6: Switch to common clk   Sascha Hauer
• [PATCH 12/12] png: add picoPNG lib support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 12/12] png: add picoPNG lib support   Antony Pavlov
• [PATCH 12/14] ARM i.MX31: Add function to setup chipselect   Sascha Hauer
• [PATCH 12/15] cfi-flash: Add devicetree probe support   Sascha Hauer
• [PATCH 12/18] ls: add symlink support to -l   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 12/18] ls: add symlink support to -l   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 12/19] command: add ln support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 12/23] ARM i.MX21: Switch to common clk   Sascha Hauer
• [PATCH 13/14] ARM i.MX35: Add function to setup chipselect   Sascha Hauer
• [PATCH 13/15] mci i.MX esdhc: Add oftree support   Sascha Hauer
• [PATCH 13/18] dirname: add -V option to return only path related to the mountpoint   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 13/18] dirname: add -V option to return only path related to the mountpoint   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 13/19] ls: add symlink support to -l   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 13/23] ARM i.MX35: Switch to common clk   Sascha Hauer
• [PATCH 14/14] ARM i.MX25: Add function to setup chipselect   Sascha Hauer
• [PATCH 14/14] ARM i.MX25: Add function to setup chipselect   Roberto Nibali
• [PATCH 14/15] ARM i.MX: add devicetree support for gpio driver   Sascha Hauer
• [PATCH 14/18] recursive_action: add ACTION_FOLLOWLINKS support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 14/18] recursive_action: add ACTION_FOLLOWLINKS support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 14/19] dirname: add -V option to return only path related to the mountpoint   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 14/23] net fec: Switch to clk support   Sascha Hauer
• [PATCH 14/23] net fec: Switch to clk support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 15/15] ARM i.MX: Add devicetree support for clocksource driver   Sascha Hauer
• [PATCH 15/18] envfs: introduce version major and minor   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 15/18] envfs: introduce version major and minor   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 15/19] recursive_action: add ACTION_FOLLOWLINKS support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 15/23] serial i.MX: Switch to clk support   Sascha Hauer
• [PATCH 15/23] serial i.MX: Switch to clk support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 16/18] envfs: add support of variable inode size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 16/18] envfs: add support of variable inode size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 16/19] envfs: introduce version major and minor   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 16/23] spi i.MX: Switch to clk support   Sascha Hauer
• [PATCH 17/18] envfs: add support of symlink   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 17/18] envfs: add support of symlink   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 17/19] envfs: add support of variable inode size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 17/23] ARM i.MX: Switch clocksource to clk_get   Sascha Hauer
• [PATCH 18/18] defautenv: add support of symlink   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 18/18] defautenv: add support of symlink   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 18/19] envfs: add support of symlink   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 18/23] mci i.MX ESDHC: Switch to clock support   Sascha Hauer
• [PATCH 19/19] defautenv: add support of symlink   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 19/23] mci i.MX: Switch to clock support   Sascha Hauer
• [PATCH 2/2] [v2] fs/fat: Handle MBR on the first sector   Franck Jullien
• [PATCH 2/2] [v2] fs/fat: Handle MBR on the first sector   Franck Jullien
• [PATCH 2/2] Add Raspberry-Pi defconfig   Carlo Caione
• [PATCH 2/2] Add Raspberry-Pi defconfig   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] Add Raspberry-Pi defconfig   Carlo Caione
• [PATCH 2/2] Add Raspberry-Pi defconfig   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] ARM i.MX6: fix usb_ehci warnings for sabrelite   Steffen Trumtrar
• [PATCH 2/2] ARM i.MX TX53: Add defconfig   Sascha Hauer
• [PATCH 2/2] ARM OMAP: switch to gpiolib support   Teresa Gámez
• [PATCH 2/2] ARM OMAP: switch to gpiolib support   Sascha Hauer
• [PATCH 2/2] Atmel sam9x boards: enable the pbl   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] complete: abstract path complete   Alexander Aring
• [PATCH 2/2] complete: abstract path complete   Sascha Hauer
• [PATCH 2/2] complete: abstract path complete   Alexander Aring
• [PATCH 2/2] complete: abstract path complete   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] defaultenv-2: add nameserver IPs to kernel-parameter ip=   Christoph Fritz
• [PATCH 2/2] defaultenv-2: add nameserver IPs to kernel-parameter ip=   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] defaultenv-2: add nameserver IPs to kernel-parameter ip=   Christoph Fritz
• [PATCH 2/2] driver: search device and driver based on the bus instead of all   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] driver: search device and driver based on the bus instead of all   Sascha Hauer
• [PATCH 2/2] drivers/nor/cfi_flash: use IS_ENABLED instead of an ifdef   Jan Luebbe
• [PATCH 2/2] fs/fat: Handle MBR on the first sector   Franck Jullien
• [PATCH 2/2] fs/fat: Handle MBR on the first sector   Franck Jullien
• [PATCH 2/2] gpio: add driver for stmpe io-expander   Sascha Hauer
• [PATCH 2/2] Makefile: add target to produce a SPL compatible uImage   Jan Luebbe
• [PATCH 2/2] Makefile: add target to produce a SPL compatible uImage   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] mtd: add private data to mtddev-hook   Alexander Aring
• [PATCH 2/2] net/eth: fix missing check on eth active   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] P2020rdb: eTSEC2 support   Renaud Barbier
• [PATCH 2/2] xload: add SPI as a boot mode   Jan Luebbe
• [PATCH 2/3] Add OpenRISC Image type   Franck Jullien
• [PATCH 2/3] amba-pl011: switch to amba bus   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] amba-pl011: switch to amba bus   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] ARM: Add assembler function to get runtime offset   Sascha Hauer
• [PATCH 2/3] ARM: Add assembler function to get runtime offset   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] ARM: Add assembler function to get runtime offset   Sascha Hauer
• [PATCH 2/3] ARM: Add assembler function to get runtime offset   Sascha Hauer
• [PATCH 2/3] ARM: Add dummy update handler   Sascha Hauer
• [PATCH 2/3] ARM: Add dummy update handler   Jan Weitzel
• [PATCH 2/3] ARM OMAP AM33XX: create new ARCH for AM33xx   Teresa Gámez
• [PATCH 2/3] ARM OMAP AM33XX: create new ARCH for AM33xx   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] ARM OMAP AM33XX: create new ARCH for AM33xx   Jan Luebbe
• [PATCH 2/3] commands: move nandtest to testing   Alexander Aring
• [PATCH 2/3] commands: move nandtest to testing   Jan Weitzel
• [PATCH 2/3] davinci_emac: adjust to new phylib framework   Jan Luebbe
• [PATCH 2/3] davinci_emac: adjust to new phylib framework   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] defconfig: Switch all defconfig to new tftp command   Sascha Hauer
• [PATCH 2/3] environment generation: remove unused CLEAN_FILES   Sascha Hauer
• [PATCH 2/3] i.MX51: unbreak FEC iomux   Eric Bénard
• [PATCH 2/3] i.MX51: unbreak FEC iomux   Sascha Hauer
• [PATCH 2/3] net: catch error on eth_send   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] net: catch error on eth_send   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] net: catch error on eth_send   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] sandbox: fix posix_types   Alexander Aring
• [PATCH 2/3] sandbox: fix whitespaces in board file   Alexander Aring
• [PATCH 2/3] switch all platform_bus device/driver registering to platform_driver/device_register   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] ARM OMAP3: rename arch_init_lowlevel to board_init_lowlevel   Jan Luebbe
• [PATCH 2/5] at91sam9263: add atmel lcdc frambuffer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] at91sam9263: add atmel lcdc frambuffer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] FSL mdio bus support   Renaud Barbier
• [PATCH 2/5] FSL mdio bus support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] globalvar: allow to register multiple device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] sandbox: do not register device before base is started   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] sandbox: do not register device before base is started   Sascha Hauer
• [PATCH 2/5] sandbox: do not register device before base is started   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] SPI: Put SPI devices on their own bus bus   Sascha Hauer
• [PATCH 2/5] SPI: Put SPI devices on their own bus bus   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] SPI: Put SPI devices on their own bus bus   Sascha Hauer
• [PATCH 2/6] gui: move gui file to include/gui and lib/gui   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/6] memory: fix regions calculation   Sascha Hauer
• [PATCH 2/6] sandbox: do not register device before barebox is started   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] added debug info for twl6030   vj
• [PATCH 2/7] defaultenv: enable glovalvar support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] defaultenv: enable glovalvar support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] echo: always allow to pass -e option   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] globalvar: add support to set a value to of all globalvars beginning with 'match'   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] globalvar: add support to set a value to of all globalvars beginning with 'match'   Sascha Hauer
• [PATCH 2/7] globalvar: add support to set a value to of all globalvars beginning with 'match'   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] smc911x: introduce read/write ops   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/8] Makefile: add target to produce a SPL compatible uimage   Jan Luebbe
• [PATCH 2/8] Makefile: add target to produce a SPL compatible uimage   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/8] Makefile: add target to produce a SPL compatible uimage   Jan Luebbe
• [PATCH 2/8] Makefile: add target to produce a SPL compatible uimage   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/9] mmc_omap: improve error message   vj
• [PATCH 20/23] i2c i.MX: Switch to clock support   Sascha Hauer
• [PATCH 20/23] i2c i.MX: Switch to clock support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 21/23] video i.MX: Switch to clock support   Sascha Hauer
• [PATCH 22/23] video i.MX IPU: Switch to clock support   Sascha Hauer
• [PATCH 23/23] ARM i.MX: Remove old clock support   Sascha Hauer
• [PATCH 3/3] [MCI_SPI] Fix endianness error on be target   Franck Jullien
• [PATCH 3/3] amba-pl011: add st specific init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] amba-pl011: add st specific init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] ARM lowlevel: Use get_runtime_offset   Sascha Hauer
• [PATCH 3/3] ARM lowlevel: Use get_runtime_offset   Sascha Hauer
• [PATCH 3/3] ARM pcm038: register nor update handler   Sascha Hauer
• [PATCH 3/3] commands: move memtest to testing   Alexander Aring
• [PATCH 3/3] davinci_emac: get rid of mdio wrapper functions   Jan Luebbe
• [PATCH 3/3] devinfo: display device bus name   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] environment generation: Fix dependencies   Sascha Hauer
• [PATCH 3/3] environment generation: Fix dependencies   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] miidev: fix 1G wrong detection   Eric Bénard
• [PATCH 3/3] miidev: fix 1G wrong detection   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] miidev: fix 1G wrong detection   Sascha Hauer
• [PATCH 3/3] miidev: fix 1G wrong detection   Eric Bénard
• [PATCH 3/3] miidev: fix 1G wrong detection   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] miidev: fix 1G wrong detection   Sascha Hauer
• [PATCH 3/3] miidev: fix 1G wrong detection   Johannes Stezenbach
• [PATCH 3/3] miidev: fix 1G wrong detection   Eric Bénard
• [PATCH 3/3] miidev: fix 1G wrong detection   Johannes Stezenbach
• [PATCH 3/3] miidev: fix 1G wrong detection   Eric Bénard
• [PATCH 3/3] miidev: fix 1G wrong detection   Sascha Hauer
• [PATCH 3/3] net/eth: fix link handling   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] net/eth: fix link handling   Sascha Hauer
• [PATCH 3/3] net/eth: fix link handling   Jan Lübbe
• [PATCH 3/3] net/eth: fix link handling   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] net/eth: fix link handling   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] net/eth: fix link handling   Sascha Hauer
• [PATCH 3/3] net/eth: fix link handling   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] net: move the eth_dev status detection at driver level   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] net: move the eth_dev status detection at driver level   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] net: move the eth_dev status detection at driver level   Sascha Hauer
• [PATCH 3/3] net: remove old tftp support   Sascha Hauer
• [PATCH 3/3] pcm051: Add inital support   Teresa Gámez
• [PATCH 3/3] pcm051: Add inital support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] pcm051: Add inital support   Sascha Hauer
• [PATCH 3/3] pcm051: Add inital support   Teresa Gamez
• [PATCH 3/3] sandbox: add missed case statement   Alexander Aring
• [PATCH 3/3] sandbox: fix malloc argument   Alexander Aring
• [PATCH 3/4] ARM: remove ARCH_HAS_LOWLEVEL_INIT   Jan Luebbe
• [PATCH 3/4] ARM pbl: enable MMU during decompression   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] at91sam9261: add atmel lcdc frambuffer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] at91sam9261: add atmel lcdc frambuffer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] gianfar update   Renaud Barbier
• [PATCH 3/5] gianfar update   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] I2C: Put I2C devices on their own bus   Sascha Hauer
• [PATCH 3/5] I2C: Put I2C devices on their own bus   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] I2C: Put I2C devices on their own bus   Sascha Hauer
• [PATCH 3/5] I2C: Put I2C devices on their own bus   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] I2C: Put I2C devices on their own bus   Sascha Hauer
• [PATCH 3/5] I2C: Put I2C devices on their own bus   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] I2C: Put I2C devices on their own bus   Sascha Hauer
• [PATCH 3/5] net/tap: use xzalloc to allocate data   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] net: switch to global device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/6] graphic_utils: pass image so we can draw only the visible part of the image   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/6] net/tap: use xzalloc to allocate data   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] defaultenv-2/ansi-colors: export color only if enable   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] defaultenv-2: boot use global.linux.bootargs.dyn for dynamic globalvar   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] defaultenv-2: boot use global.linux.bootargs.dyn for dynamic globarvar   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] defaultenv-2: boot use global.linux.bootargs.dyn for dynamic globarvar   Sascha Hauer
• [PATCH 3/7] defaultenv-2: boot use global.linux.bootargs.dyn for dynamic globarvar   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] defaultenv: switch hostname to global.hostname   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] defaultenv: switch hostname to global.hostname   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] defaultenv: switch hostname to global.hostname   Sascha Hauer
• [PATCH 3/7] defaultenv: switch hostname to global.hostname   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] defaultenv: switch hostname to global.hostname   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] OMAP specific changes   vj
• [PATCH 3/7] OMAP specific changes   Sascha Hauer
• [PATCH 3/7] smc911x: add 16bit bus width support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7 v2] defaultenv: switch hostname to global.hostname   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/8] scripts: add tool to create image for SPI boot on AM35xx   Jan Luebbe
• [PATCH 3/9] omap4: add/rename definitions to match datasheet   vj
• [PATCH 4/4] ARM: give boards control of the reset entry point   Jan Luebbe
• [PATCH 4/4] ARM: give boards control of the reset entry point   Sascha Hauer
• [PATCH 4/5] at91sam9g45: add atmel lcdc frambuffer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5] at91sam9g45: add atmel lcdc frambuffer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5] dhcp: switch globalvar to it's own device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5] driver: register bus   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5] driver: rewrite dev_printf as a function   Sascha Hauer
• [PATCH 4/5] FSL mdio: configuration and build file   Renaud Barbier
• [PATCH 4/6] driver: register bus   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/6] gui: introduce screen and surface to factorize and simplify code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] Add USB booting capabilities to OMAP   vj
• [PATCH 4/7] Add USB booting capabilities to OMAP   Sascha Hauer
• [PATCH 4/7] Add USB booting capabilities to OMAP   vj
• [PATCH 4/7] Add USB booting capabilities to OMAP   Sascha Hauer
• [PATCH 4/7] defaultenv-2: boot reset linux.bootargs.dyn. and bootm. globalvar   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] defaultenv-2: boot reset linux.bootargs.dyn. and bootm. globarvar   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] dhcp: switch to global var support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] dhcp: switch to global var support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] globalvar: add support to set a value to of all globalvars beginning with 'match'   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] smc911x: add support to pass the shift via platform data   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/8] common: split out meminfo output and make it optional   Jan Luebbe
• [PATCH 4/9] twl6030: add debug info   vj
• [PATCH 4/9] twl6030: add debug info   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] at91sam9m10g45ek: add lcdc support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] at91sam9m10g45ek: add lcdc support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] at91sam9m10g45ek: add lcdc support   Sascha Hauer
• [PATCH 5/5] at91sam9m10g45ek: add lcdc support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] at91sam9m10g45ek: add lcdc support   Sascha Hauer
• [PATCH 5/5] bootm: switch globalvar to it's own device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] defaultenv-2: add boot sequence   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] driver: Add platform_device_id mechanism   Sascha Hauer
• [PATCH 5/5] driver: search device and driver based on the bus instead of all   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] P2020rdb: eTSEC2 support   Renaud Barbier
• [PATCH 5/6] driver: search device and driver based on the bus instead of all   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6] graphic_utils: introduce common fb_open/close   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] add console support over the same USB used for booting   vj
• [PATCH 5/7] defaultenv-2: boot use global.linux.bootargs.dyn for dynamic globalvar   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] dhcp: add copy_only_if_valid support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] dhcp: add copy_only_if_valid support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] echo: always allow to pass -e option   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] echo: always allow to pass -e option   Sascha Hauer
• [PATCH 5/7] echo: always allow to pass -e option   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] smc911x: improve detection handle   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/8] drivers/net/ksz8864rmn: add driver for Micrel KSZ8864RMN Ethernet Switch   Jan Luebbe
• [PATCH 5/9] add gitignore file   vj
• [PATCH 6/6] gui: blit the surface on demand   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/6] switch all platform_bus device/driver registering to platform_driver/device_register   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] add filesystem support over the same USB used for booting   vj
• [PATCH 6/7] defaultenv-2/ansi-colors: export color only if enable   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] defaultenv-2/ansi-colors: export color only if enable   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] defaultenv-2: boot reset linux.bootargs.dyn. and bootm. globalvar   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] dhcp: add retries limit support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] dhcp: add retries limit support   Sascha Hauer
• [PATCH 6/7] dhcp: add retries limit support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] dhcp: add retries limit support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] dhcp: add retries limit support   Sascha Hauer
• [PATCH 6/7] dhcp: add retries limit support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] dhcp: add retries limit support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] smc911x: update chip detection   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/8] drivers/net: add driver for the EMAC device found in some TI SoCs   Jan Luebbe
• [PATCH 6/8] drivers/net: add driver for the EMAC device found in some TI SoCs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/8] drivers/net: add driver for the EMAC device found in some TI SoCs   Sascha Hauer
• [PATCH 6/8] drivers/net: add driver for the EMAC device found in some TI SoCs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/9] omap4: add usb boot support   vj
• [PATCH 6/9] omap4: add usb boot support   Antony Pavlov
• [PATCH 6/9] omap4: add usb boot support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/9] omap4: add usb boot support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/9] omap4: add usb boot support   vj
• [PATCH 6/9] omap4: add usb boot support   vj
• [PATCH 6/9] omap4: add usb boot support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/9] omap4: add usb boot support   vj
• [PATCH 6/9] omap4: add usb boot support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/9] omap4: add usb boot support   vj
• [PATCH 7/7] Add support for Archos G9 tablet   vj
• [PATCH 7/7] defaultenv-2: add boot sequence   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] defaultenv-2: add boot sequence   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] defaultenv-2: add boot sequence   Sascha Hauer
• [PATCH 7/7] defaultenv-2: add boot sequence   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] defaultenv-2: add boot sequence   Sascha Hauer
• [PATCH 7/7] defaultenv-2: add boot sequence   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] defaultenv-2: add boot sequence   Sascha Hauer
• [PATCH 7/7] defaultenv-2: add boot sequence   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] defaultenv-2: add boot sequence   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] defaultenv-2: add boot sequence   Sascha Hauer
• [PATCH 7/7] defaultenv-2: add boot sequence   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] defaultenv-2: add boot sequence   Sascha Hauer
• [PATCH 7/7] defaultenv-2: add boot sequence   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] defaultenv-2: add symbolic link support to boot/nfs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] defaultenv-2: eth0 add default global.dhcp.vendor_id   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] defaultenv-2: eth0 add default global.dhcp.vendor_id   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] smc911x: check if the device is ready before using it   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/8] omap3: remove unused coded for clock configuration   Jan Luebbe
• [PATCH 7/9] omap4: add serial communications over usb boot   vj
• [PATCH 8/8] drivers/spi: add driver for the Multichannel SPI controller found in TI SoCs   Jan Luebbe
• [PATCH 8/8] drivers/spi: add driver for the Multichannel SPI controller found in TI SoCs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/9] omap4: add filesystem support over usb boot   vj
• [PATCH 8/9] omap4: add filesystem support over usb boot   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 9/9] Add support for Archos G9 tablet   vj
• [PATCH 9/9] Add support for Archos G9 tablet   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 9/9] Add support for Archos G9 tablet   Antony Pavlov
• [PATCH] [OpenRISC] Add __ashrdi3 and remove link to libgcc   Franck Jullien
• [PATCH] [OpenRISC] Add __ashrdi3 and remove link to libgcc   Sascha Hauer
• [PATCH] [OpenRISC] Add __ashrdi3 and remove link to libgcc   Franck Jullien
• [PATCH] [RFC] fec: fix calculation of mii bus speed on mxs   Uwe Kleine-König
• [PATCH] [RFC] fec: fix calculation of mii bus speed on mxs   Sascha Hauer
• [PATCH] [RFC] i2c-imx: send a soft bus reset during probe   Uwe Kleine-König
• [PATCH] [RFC] i2c-imx: send a soft bus reset during probe   Sascha Hauer
• [PATCH] [RFC] i2c-imx: send a soft bus reset during probe   Johannes Stezenbach
• [PATCH] [RFC] i2c-imx: send a soft bus reset during probe   Wolfram Sang
• [PATCH] [RFC] i2c-imx: send a soft bus reset during probe   Uwe Kleine-König
• [PATCH] [RFC] i2c-imx: send a soft bus reset during probe   Uwe Kleine-König
• [PATCH] arm: cfa10036: Add proper resource length   Maxime Ripard
• [PATCH] arm: cfa10036: Add proper resource length   Sascha Hauer
• [PATCH] arm: cfa10036: Add proper resource length   Maxime Ripard
• [PATCH] arm: cfa10036: Add proper resource length   Sascha Hauer
• [PATCH] arm: cfa10036: Add the OCOTP device   Maxime Ripard
• [PATCH] arm: cfa10036: Add the OCOTP device   Sascha Hauer
• [PATCH] ARM: enable MMU in pbl   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: enable MMU in pbl   Sascha Hauer
• [PATCH] ARM: enable MMU in pbl   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: enable MMU in pbl   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: enable MMU in pbl   Sascha Hauer
• [PATCH] ARM: enable MMU in pbl   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arm: mxs: add proper resource length   Wolfram Sang
• [PATCH] arm: mxs: add proper resource length   Uwe Kleine-König
• [PATCH] arm: mxs: add proper resource length   Sascha Hauer
• [PATCH] arm: mxs: bcb: fix usage of second bootstream   Sascha Hauer
• [PATCH] ARM i.MX51 babbage: Add delay after phy reset   Sascha Hauer
• [PATCH] ARM i.MX6: query silicon revision   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM i.MX6: query silicon revision   Steffen Trumtrar
• [PATCH] ARM i.MX: add debug for iomux-v3   Sascha Hauer
• [PATCH] ARM i.MX clocksource: fix timer source selection   Sascha Hauer
• [PATCH] ARM Makefile: switch to kbuild command definition for mkublheader   Jan Luebbe
• [PATCH] ARM Makefile: switch to kbuild command definition for mkublheader   Sascha Hauer
• [PATCH] ARM mmu: use xmemalign   Sascha Hauer
• [PATCH] Barebox logo   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] commands/mount: fix typo and wording in help message   Jan Luebbe
• [PATCH] common clk support   Sascha Hauer
• [PATCH] defenv2: fix verbose booting, typo   Sascha Hauer
• [PATCH] device/driver work   Sascha Hauer
• [PATCH] devicetree probe support   Sascha Hauer
• [PATCH] devicetree probe support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] drivers/net: add driver for the EMAC device found in some TI SoCs   Jan Luebbe
• [PATCH] drivers/net: add driver for the EMAC device found in some TI SoCs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] drivers/net: add driver for the EMAC device found in some TI SoCs   Sascha Hauer
• [PATCH] Fix environment generation dependencies   Sascha Hauer
• [PATCH] fs: fs.c fix cast   Alexander Aring
• [PATCH] fs: fs.c fix cast   Sascha Hauer
• [PATCH] fsl TSEC: register map boundary   Renaud Barbier
• [PATCH] fsl TSEC: register map boundary   Sascha Hauer
• [PATCH] gpio: reduce verbosity while probing   Jan Luebbe
• [PATCH] gpio: reduce verbosity while probing   Sascha Hauer
• [PATCH] i.mx35pdk add nand identification   Alex Gershgorin
• [PATCH] i.mx35pdk add nand identification   Eric Bénard
• [PATCH] i.mx35pdk add nand identification   Alex Gershgorin
• [PATCH] i.mx35pdk add nand identification   Sascha Hauer
• [PATCH] i.mx35pdk add nand identification   Alex Gershgorin
• [PATCH] i.mx35pdk add nand identification   Eric Bénard
• [PATCH] i.mx35pdk add nand identification   Alex Gershgorin
• [PATCH] i.mx35pdk add nand identification   Alex Gershgorin
• [PATCH] i.mx35pdk add nand identification   Eric Bénard
• [PATCH] i.MX register cleanups   Sascha Hauer
• [PATCH] Karo TX53 support   Sascha Hauer
• [PATCH] Make: Fix if_changed when command contains backslashes   Sascha Hauer
• [PATCH] Makefile: add target to produce a SPL compatible uImage   Jan Luebbe
• [PATCH] Makefile: add target to produce a SPL compatible uImage   Jan Luebbe
• [PATCH] Makefile: add target to produce a SPL compatible uImage   Teresa Gamez
• [PATCH] Makefile: add target to produce a SPL compatible uImage   Jan Lübbe
• [PATCH] Makefile: add target to produce a SPL compatible uImage   Jan Lübbe
• [PATCH] Makefile: add target to produce a SPL compatible uImage   Teresa Gamez
• [PATCH] Makefile: add target to produce a SPL compatible uImage   Jan Lübbe
• [PATCH] mci imx-esdhc: increase write timeout   Sascha Hauer
• [PATCH] mips: remove undefined local_irq_save/local_irq_restore   Sascha Hauer
• [PATCH] mtd/mtdraw: fix format specifier for ssize_t   Jan Luebbe
• [PATCH] mtd: nand: Add K9LBG08U0D chip to flash ids   Alex Gershgorin
• [PATCH] mtd: nand: Add K9LBG08U0D chip to flash ids   Sascha Hauer
• [PATCH] mtd: nand: extend NAND flash detection to new MLC chips   Marcus Folkesson
• [PATCH] mtd: nand: extend NAND flash detection to new MLC chips   Sascha Hauer
• [PATCH] mtd: nand: extend NAND flash detection to new MLC chips   Marcus Folkesson
• [PATCH] mtd: use correct format specifier   Jan Luebbe
• [PATCH] mtd: use correct format specifier   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] mtd mtdraw: Fix partial page read   Sascha Hauer
• [PATCH] mtd mtdraw: Fix partial page read   Robert Jarzmik
• [PATCH] mtd mtdraw: Fix partial page read   Sascha Hauer
• [PATCH] mtd mtdraw: Fix partial page read   Robert Jarzmik
• [PATCH] net: add multiple nameserver support   Christoph Fritz
• [PATCH] net: add multiple nameserver support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] net: add multiple nameserver support   Christoph Fritz
• [PATCH] net: miidev: really wait for auto negotiation   Sascha Hauer
• [PATCH] net: tftp: timeout only after a proper amount of time   Wolfram Sang
• [PATCH] nios2: Fix DMA functions when CPU has no dcache   Franck Jullien
• [PATCH] nios2: Fix DMA functions when CPU has no dcache   Sascha Hauer
• [PATCH] omap3_spi: fix bus numbers according to omap3_add_spi[1-4]   Jan Luebbe
• [PATCH] omap: add SPI as a boot mode for xload   Jan Luebbe
• [PATCH] omap: add SPI as a boot mode for xload   Jan Lübbe
• [PATCH] omap: add SPI as a boot mode for xload   Baruch Siach
• [PATCH] PCM049: nand_bootstrap add shebang   Jan Weitzel
• [PATCH] PCM049: nand_bootstrap add shebang   Sascha Hauer
• [PATCH] pcm049 phycard l + xl2: update partion sizes   Jan Weitzel
• [PATCH] pcm049 phycard l + xl2: update partion sizes   Sascha Hauer
• [PATCH] scripts: add tool to create image for SPI boot on AM35xx   Jan Luebbe
• [PATCH] scripts: add tool to create image for SPI boot on AM35xx   Sascha Hauer
• [PATCH] smsc911x: Check platformdata pointer   Jan Weitzel
• [PATCH] smsc911x: Check platformdata pointer   Sascha Hauer
• [PATCH] spi: switch from printf back to debug   Jan Luebbe
• [PATCH] Treewide: remove address of the Free Software Foundation   Sascha Hauer
• [PATCH] use fs based tftp support   Sascha Hauer
• [PATCH] video imx-ipu-fb: add clear screen   Alex Gershgorin
• [PATCH] video imx-ipu-fb: add clear screen   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] video imx-ipu-fb: add clear screen   Sascha Hauer
• [PATCH] video imx-ipu-fb: add clear screen   Alex Gershgorin
• [PATCH] video imx-ipu-fb: add clear screen   Sascha Hauer
• [PATCH] video imx-ipu-fb: add clear screen   Alex Gershgorin
• [PATCH] WIP beaglebone: add first-stage supprort for AM335x and board   Jan Luebbe
• [PATCHv2 0/2] Add ARCH for AM33xx and phyCORE-AM335x support   Teresa Gámez
• [PATCH v2 0/2] Add stmpe mfd   Steffen Trumtrar
• [PATCH V2 0/6 ] IMX i2c driver update for the PPC 85xx   Sascha Hauer
• [PATCH v2 00/11] ARM i.MX: add gpiolib support   Steffen Trumtrar
• [PATCH v2 01/11] add gpiolib support   Steffen Trumtrar
• [PATCH v2 02/11] ARM i.MX: switch to gpiolib support   Steffen Trumtrar
• [PATCH v2 03/11] ARM i.MX1: add imx-gpio devices   Steffen Trumtrar
• [PATCH v2 04/11] ARM i.MX21: add imx-gpio devices   Steffen Trumtrar
• [PATCH v2 05/11] ARM i.MX25: add imx-gpio devices   Steffen Trumtrar
• [PATCH v2 06/11] ARM i.MX27: add imx-gpio devices   Steffen Trumtrar
• [PATCH v2 07/11] ARM i.MX31: add imx-gpio devices   Steffen Trumtrar
• [PATCH v2 08/11] ARM i.MX35: add imx-gpio devices   Steffen Trumtrar
• [PATCH v2 09/11] ARM i.MX51: add imx-gpio devices   Steffen Trumtrar
• [PATCH v2 1/1] boards: Add support for imx233-olinuxino board   Fadil Berisha
• [PATCH v2 1/1] boards: Add support for imx233-olinuxino board   Sascha Hauer
• [PATCHv2 1/2] ARM OMAP AM33XX: create new ARCH for AM33xx   Teresa Gámez
• [PATCHv2 1/2] ARM OMAP AM33XX: create new ARCH for AM33xx   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 1/2] mfd: add stmpe-i2c driver   Steffen Trumtrar
• [PATCH v2 1/2] mfd: add stmpe-i2c driver   Sascha Hauer
• [PATCH v2 1/2] mfd: add stmpe-i2c driver   Marc Kleine-Budde
• [PATCH v2 1/3] davinci_emac: return 0 on successful transmit   Jan Luebbe
• [PATCH v2 10/11] ARM i.MX53: add imx-gpio devices   Steffen Trumtrar
• [PATCH v2 11/11] ARM i.MX6: add imx-gpio devices   Steffen Trumtrar
• [PATCH v2 2/2] gpio: add driver for stmpe io-expander   Steffen Trumtrar
• [PATCH v2 2/2] gpio: add driver for stmpe io-expander   Sascha Hauer
• [PATCH v2 2/2] gpio: add driver for stmpe io-expander   Marc Kleine-Budde
• [PATCHv2 2/2] pcm051: Add inital support   Teresa Gámez
• [PATCHv2 2/2] pcm051: Add inital support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 2/3] davinci_emac: adjust to new phylib framework   Jan Luebbe
• [PATCH v2 2/3] davinci_emac: adjust to new phylib framework   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 3/3] davinci_emac: get rid of mdio wrapper functions   Jan Luebbe
• [PATCH v2] ARM i.MX6: query silicon revision   Steffen Trumtrar
• [PATCH v2] ARM lowlevel   Sascha Hauer
• [PATCH v2] environment generation: Fix dependencies   Sascha Hauer
• [PATCH v2] environment generation: Fix dependencies   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 0/2] Add stmpe mfd   Steffen Trumtrar
• [PATCH v3 1/2] mfd: add stmpe-i2c driver   Steffen Trumtrar
• [PATCH v3 1/2] mfd: add stmpe-i2c driver   Marc Kleine-Budde
• [PATCH v3 1/2] mfd: add stmpe-i2c driver   Sascha Hauer
• [PATCH v3 1/3] davinci_emac: return 0 on successful transmit   Jan Luebbe
• [PATCH v3 2/2] gpio: add driver for stmpe io-expander   Steffen Trumtrar
• [PATCH v3 2/3] davinci_emac: adjust to new phylib framework   Jan Luebbe
• [PATCH v3 3/3] davinci_emac: get rid of mdio wrapper functions   Jan Luebbe
• [PATCH v3] davinci_emac: follow phylib changes   Jan Luebbe
• [PATCH v3] davinci_emac: follow phylib changes   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3] davinci_emac: follow phylib changes   Sascha Hauer
• [PATCH v3] xload: get barebox size from barebox_arm_head   Jan Weitzel
• [PATCH v3] xload: get barebox size from barebox_arm_head   Sascha Hauer
• [PATCH v3] xload: get barebox size from barebox_arm_head   Jan Weitzel
• [PATCH v3] xload: get barebox size from barebox_arm_head   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 0/2] Add stmpe mfd   Steffen Trumtrar
• [PATCH v4 0/2] Add stmpe mfd   Sascha Hauer
• [PATCH v4 1/2] mfd: add stmpe-i2c driver   Steffen Trumtrar
• [PATCH v4 2/2] gpio: add driver for stmpe io-expander   Steffen Trumtrar
• [PATCH v4] bootm: add global bootm.{image/initrd}.loadaddr support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4] xload: get barebox size from barebox_arm_head   Jan Weitzel
• [PATCH v4] xload: get barebox size from barebox_arm_head   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v5] xload: get barebox size from barebox_arm_head   Jan Weitzel
• [PATCH v5] xload: get barebox size from barebox_arm_head   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v5] xload: get barebox size from barebox_arm_head   Sascha Hauer
• [PATCH v5] xload: get barebox size from barebox_arm_head   Sascha Hauer
• [Resend PATCH 0/7 v3] defaultenv-2: add boot sequence   Jean-Christophe PLAGNIOL-VILLARD
• [RFC, PATCH] barebox-update command support   Sascha Hauer
• [RFC, PATCH] barebox-update command support   Jan Weitzel
• [RFC, PATCH] barebox-update command support   Sascha Hauer
• [RFC][FAT] Handle MBR on the first sector   Franck Jullien
• [RFC][FAT] Handle MBR on the first sector   Sascha Hauer
• [RFC][FAT] Handle MBR on the first sector   Franck Jullien
• [RFC][FAT] Handle MBR on the first sector   Sascha Hauer
• [RFC][FAT] Handle MBR on the first sector   Jean-Christophe PLAGNIOL-VILLARD
• [RFC][FAT] Handle MBR on the first sector   Franck Jullien
• [RFC][FAT] Handle MBR on the first sector   Jean-Christophe PLAGNIOL-VILLARD
• [RFC][FAT] Handle MBR on the first sector   Franck Jullien
• [RFC][FAT] Handle MBR on the first sector   Jean-Christophe PLAGNIOL-VILLARD
• [RFC][FAT] Handle MBR on the first sector   Franck Jullien
• [RFC][PATCH] archosg9: add support for tablet   vj
• [RFC][PATCH] archosg9: add support for tablet   Jean-Christophe PLAGNIOL-VILLARD
• [RFC] Dedicated command to make a target bootable with Barebox   Juergen Beisert
• [RFC] Dedicated command to make a target bootable with Barebox   Jean-Christophe PLAGNIOL-VILLARD
• [RFC] Dedicated command to make a target bootable with Barebox   Sascha Hauer
• [RFC] Dedicated command to make a target bootable with Barebox   Juergen Beisert
• [RFC] Dedicated command to make a target bootable with Barebox   Jean-Christophe PLAGNIOL-VILLARD
• [RFC] spi: add demo bitbang driver based on code from linux   Antony Pavlov
• [RFC] spi: add demo bitbang driver based on code from linux   Jean-Christophe PLAGNIOL-VILLARD
• [RFC] spi: add demo bitbang driver based on code from linux   Antony Pavlov
• [RFC PATCH 0/5] switch globalvar to it's own bus   Jean-Christophe PLAGNIOL-VILLARD
• barebox ascii art   Antony Pavlov
• barebox on imx23-olinuxino   Fadil Berisha
• barebox on imx23-olinuxino   Sascha Hauer
• barebox on imx23-olinuxino   Fadil Berisha
• davinci_emac: follow phylib changes   Jan Luebbe
• iMX27 board : Barebox & linux 2.6.24.6 => reboot the board randomly ...   Aurelien Bouin
• Info about cache test at uboot prompt.   naveen yadav
• Info about cache test at uboot prompt.   Jean-Christophe PLAGNIOL-VILLARD
• Info about cache test at uboot prompt.   naveen yadav
• issue patch in next net/eth: fix link handling   Jean-Christophe PLAGNIOL-VILLARD
• issue patch in next net/eth: fix link handling   Sascha Hauer
• issue patch in next net/eth: fix link handling   Jean-Christophe PLAGNIOL-VILLARD
• issue patch in next net/eth: fix link handling   Sascha Hauer
• issue patch in next net/eth: fix link handling   Jean-Christophe PLAGNIOL-VILLARD
• MLO doesn't work, rest is ok   Norbert Roos
• MLO doesn't work, rest is ok   Jan Weitzel
• MLO doesn't work, rest is ok   Norbert Roos
• MLO doesn't work, rest is ok   Jan Weitzel
• MLO doesn't work, rest is ok   Norbert Roos
• MLO doesn't work, rest is ok   Sascha Hauer
• MLO doesn't work, rest is ok   Norbert Roos
• MLO doesn't work, rest is ok   Sascha Hauer
• MLO doesn't work, rest is ok   Anand Gadiyar
• MLO doesn't work, rest is ok   Jan Weitzel
• MLO doesn't work, rest is ok   Jean-Christophe PLAGNIOL-VILLARD
• MLO doesn't work, rest is ok   Norbert Roos
• MLO doesn't work, rest is ok   Norbert Roos
• MLO doesn't work, rest is ok   Norbert Roos
• next-stable tag   Sascha Hauer
• next-stable tag   Jean-Christophe PLAGNIOL-VILLARD
• OMAP SPI adding inline functions   Teresa Gamez
• Patch a file in the next branch   Franck Jullien
• Patch a file in the next branch   Sascha Hauer
• Patch a file in the next branch   Jean-Christophe PLAGNIOL-VILLARD
• Patch a file in the next branch   Sascha Hauer
• Patch a file in the next branch   Jean-Christophe PLAGNIOL-VILLARD
• Prepare support for TI AM35xx   Jan Luebbe
• Prepare support for TI AM35xx   Jan Luebbe
• Problem with nand_mxs driver   Marcus Folkesson
• Problem with nand_mxs driver   Sascha Hauer
• regression: ARM: pca100: Use _text rather than TEXT_BASE   Christoph Fritz
• Suspected ##SPAM## -:Re: [PATCH v4] xload: get barebox size from barebox_arm_head   Jan Weitzel
• Suspected ##SPAM## -:Re: [PATCH v4] xload: get barebox size from barebox_arm_head   Jean-Christophe PLAGNIOL-VILLARD
• v2012.09.0   Sascha Hauer
• Write Protect Error re-flashing /dev/nor0.barebox   Jerry Kirk
• Write Protect Error re-flashing /dev/nor0.barebox   Jean-Christophe PLAGNIOL-VILLARD
• Write Protect Error re-flashing /dev/nor0.barebox   Jerry Kirk
• Write Protect Error re-flashing /dev/nor0.barebox   Sascha Hauer
• Write Protect Error re-flashing /dev/nor0.barebox   Jerry Kirk
• Writing to the OCOTP on mx28 boards   Maxime Ripard
• Writing to the OCOTP on mx28 boards   Maxime Ripard
• Writing to the OCOTP on mx28 boards   Sascha Hauer
• Writing to the OCOTP on mx28 boards   Maxime Ripard
• Доска бесплатных объявлений с Каталогом Организаций   trueboard.ru
• 钰鑫邬小姐与您共享了照片   钰鑫邬小姐

Last message date: Sun Sep 30 12:00:06 EDT 2012
Archived on: Sun Sep 30 12:00:12 EDT 2012

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...