[PATCH v5] xload: get barebox size from barebox_arm_head

[Jean-Christophe PLAGNIOL-VILLARD]

On 14:41 Thu 06 Sep     , Jan Weitzel wrote:
> Add functions to read the barebox_arm_head, check barebox magicword
> and read out the barebox image size.
> Create a inital partion of 1Mb to access the barebox image on nand.
> 
> Signed-off-by: Jan Weitzel <j.weitzel at phytec.de>
> ---
> v2: remove fall back if header read fail 
> v3: fix header check, rebase master 
> v4: factorize barebox detection
> v5: mv devines to include/filetype.h
> 
>  arch/arm/include/asm/barebox-arm-head.h |    9 +++++
>  arch/arm/mach-omap/include/mach/xload.h |    2 +-
>  arch/arm/mach-omap/xload.c              |   57 ++++++++++++++++++++++++++++--
>  common/filetype.c                       |    2 +-
>  include/filetype.h                      |   16 +++++++++
>  4 files changed, 71 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/mach-omap/include/mach/xload.h b/arch/arm/mach-omap/include/mach/xload.h
> index 844b57f..26f1b68 100644
> --- a/arch/arm/mach-omap/include/mach/xload.h
> +++ b/arch/arm/mach-omap/include/mach/xload.h
> @@ -1,7 +1,7 @@
>  #ifndef _MACH_XLOAD_H
>  #define _MACH_XLOAD_H
>  
> -void *omap_xload_boot_nand(int offset, int size);
> +void *omap_xload_boot_nand(int offset);
>  void *omap_xload_boot_mmc(void);
>  
>  enum omap_boot_src {
> diff --git a/arch/arm/mach-omap/xload.c b/arch/arm/mach-omap/xload.c
> index 13024ab..0afeea9 100644
> --- a/arch/arm/mach-omap/xload.c
> +++ b/arch/arm/mach-omap/xload.c
> @@ -7,16 +7,65 @@
>  #include <fcntl.h>
>  #include <mach/xload.h>
>  #include <sizes.h>
> +#include <filetype.h>
>  
> -void *omap_xload_boot_nand(int offset, int size)
> +void *read_image_head(const char *name)
>  {
> +	void *header = xmalloc(ARM_HEAD_SIZE);
> +	struct cdev *cdev;
>  	int ret;
> -	void *to = xmalloc(size);
> +
> +	cdev = cdev_open(name, O_RDONLY);
> +	if (!cdev) {
> +		printf("failed to open partition\n");
> +		return NULL;
> +	}
> +
> +	ret = cdev_read(cdev, header, ARM_HEAD_SIZE, 0, 0);
> +	cdev_close(cdev);
> +
> +	if (ret != ARM_HEAD_SIZE) {
> +		printf("failed to read from partition\n");
> +		return NULL;
> +	}
> +
> +	return header;
> +}
> +
> +unsigned int get_image_size(void *head)
> +{
> +	unsigned int ret = 0;
> +	unsigned int *psize = head + ARM_HEAD_SIZE_OFFSET;
> +
> +	if (is_barebox_arm_head(head))
> +		ret = *psize;
> +	debug("Detected barebox image size %u\n", ret);
> +
> +	return ret;
> +}
> +
> +void *omap_xload_boot_nand(int offset)
> +{
> +	int ret;
> +	int size;
> +	void *to, *header;
>  	struct cdev *cdev;
>  
> -	devfs_add_partition("nand0", offset, size, DEVFS_PARTITION_FIXED, "x");
> +	devfs_add_partition("nand0", offset, SZ_1M, DEVFS_PARTITION_FIXED, "x");
I'd map 8M so can boot a kernel directly too

Best Regards,
J.