[PATCH 13/23] ARM i.MX35: Switch to common clk
Sascha Hauer
s.hauer at pengutronix.de
Mon Sep 24 07:04:42 EDT 2012
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
arch/arm/mach-imx/Makefile | 2 +-
arch/arm/mach-imx/clk-imx35.c | 186 +++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-imx/imx35.c | 3 +-
3 files changed, 189 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/mach-imx/clk-imx35.c
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index a06ddf5..f7a5ba4 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -5,7 +5,7 @@ obj-$(CONFIG_ARCH_IMX25) += speed-imx25.o imx25.o iomux-v3.o clk-imx25.o
obj-$(CONFIG_ARCH_IMX21) += speed-imx21.o imx21.o iomux-v1.o clk-imx21.o
obj-$(CONFIG_ARCH_IMX27) += speed-imx27.o imx27.o iomux-v1.o clk-imx27.o
obj-$(CONFIG_ARCH_IMX31) += speed-imx31.o imx31.o iomux-v2.o clk-imx31.o
-obj-$(CONFIG_ARCH_IMX35) += speed-imx35.o imx35.o iomux-v3.o
+obj-$(CONFIG_ARCH_IMX35) += speed-imx35.o imx35.o iomux-v3.o clk-imx35.o
obj-$(CONFIG_ARCH_IMX51) += speed-imx51.o imx51.o iomux-v3.o imx5.o clk-imx5.o
obj-$(CONFIG_ARCH_IMX53) += speed-imx53.o imx53.o iomux-v3.o imx5.o clk-imx5.o
obj-$(CONFIG_ARCH_IMX6) += speed-imx6.o imx6.o iomux-v3.o usb-imx6.o clk-imx6.o
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
new file mode 100644
index 0000000..d9f88c2
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -0,0 +1,186 @@
+/*
+ * Copyright (C) 2012 Sascha Hauer, Pengutronix <s.hauer at pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <common.h>
+#include <init.h>
+#include <driver.h>
+#include <linux/clk.h>
+#include <io.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <mach/imx35-regs.h>
+
+#include "clk.h"
+
+#define CCM_CCMR 0x00
+#define CCM_PDR0 0x04
+#define CCM_PDR1 0x08
+#define CCM_PDR2 0x0C
+#define CCM_PDR3 0x10
+#define CCM_PDR4 0x14
+#define CCM_RCSR 0x18
+#define CCM_MPCTL 0x1C
+#define CCM_PPCTL 0x20
+#define CCM_ACMR 0x24
+#define CCM_COSR 0x28
+#define CCM_CGR0 0x2C
+#define CCM_CGR1 0x30
+#define CCM_CGR2 0x34
+#define CCM_CGR3 0x38
+
+struct arm_ahb_div {
+ unsigned char arm, ahb, sel;
+};
+
+static struct arm_ahb_div clk_consumer[] = {
+ { .arm = 1, .ahb = 4, .sel = 0},
+ { .arm = 1, .ahb = 3, .sel = 1},
+ { .arm = 2, .ahb = 2, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 4, .ahb = 1, .sel = 0},
+ { .arm = 1, .ahb = 5, .sel = 0},
+ { .arm = 1, .ahb = 8, .sel = 0},
+ { .arm = 1, .ahb = 6, .sel = 1},
+ { .arm = 2, .ahb = 4, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 4, .ahb = 2, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+};
+
+static char hsp_div_532[] = { 4, 8, 3, 0 };
+static char hsp_div_400[] = { 3, 6, 3, 0 };
+
+enum mx35_clks {
+ ckih, mpll, ppll, mpll_075, arm, hsp, hsp_div, hsp_sel, ahb, ipg,
+ arm_per_div, ahb_per_div, ipg_per, uart_sel, uart_div, esdhc_sel,
+ esdhc1_div, esdhc2_div, esdhc3_div, spdif_sel, spdif_div_pre,
+ spdif_div_post, ssi_sel, ssi1_div_pre, ssi1_div_post, ssi2_div_pre,
+ ssi2_div_post, usb_sel, usb_div, nfc_div, asrc_gate, pata_gate,
+ audmux_gate, can1_gate, can2_gate, cspi1_gate, cspi2_gate, ect_gate,
+ edio_gate, emi_gate, epit1_gate, epit2_gate, esai_gate, esdhc1_gate,
+ esdhc2_gate, esdhc3_gate, fec_gate, gpio1_gate, gpio2_gate, gpio3_gate,
+ gpt_gate, i2c1_gate, i2c2_gate, i2c3_gate, iomuxc_gate, ipu_gate,
+ kpp_gate, mlb_gate, mshc_gate, owire_gate, pwm_gate, rngc_gate,
+ rtc_gate, rtic_gate, scc_gate, sdma_gate, spba_gate, spdif_gate,
+ ssi1_gate, ssi2_gate, uart1_gate, uart2_gate, uart3_gate, usbotg_gate,
+ wdog_gate, max_gate, admux_gate, csi_gate, iim_gate, gpu2d_gate,
+ clk_max
+};
+
+static struct clk *clks[clk_max];
+
+static const char *std_sel[] = {
+ "ppll",
+ "arm",
+};
+
+static const char *ipg_per_sel[] = {
+ "ahb_per_div",
+ "arm_per_div",
+};
+
+static int imx35_ccm_probe(struct device_d *dev)
+{
+ u32 pdr0, consumer_sel, hsp_sel;
+ struct arm_ahb_div *aad;
+ unsigned char *hsp_div;
+ void __iomem *base;
+
+ base = dev_request_mem_region(dev, 0);
+
+ writel(0xffffffff, base + CCM_CGR0);
+ writel(0xffffffff, base + CCM_CGR1);
+ writel(0xffffffff, base + CCM_CGR2);
+ writel(0xffffffff, base + CCM_CGR3);
+
+ pdr0 = __raw_readl(base + CCM_PDR0);
+ consumer_sel = (pdr0 >> 16) & 0xf;
+ aad = &clk_consumer[consumer_sel];
+ if (!aad->arm) {
+ pr_err("i.MX35 clk: illegal consumer mux selection 0x%x\n", consumer_sel);
+ /*
+ * We are basically stuck. Continue with a default entry and hope we
+ * get far enough to actually show the above message
+ */
+ aad = &clk_consumer[0];
+ }
+
+ clks[ckih] = clk_fixed("ckih", 24000000);
+ clks[mpll] = imx_clk_pllv1("mpll", "ckih", base + CCM_MPCTL);
+ clks[ppll] = imx_clk_pllv1("ppll", "ckih", base + CCM_PPCTL);
+
+ clks[mpll_075] = imx_clk_fixed_factor("mpll_075", "mpll", 3, 4);
+
+ if (aad->sel)
+ clks[arm] = imx_clk_fixed_factor("arm", "mpll_075", 1, aad->arm);
+ else
+ clks[arm] = imx_clk_fixed_factor("arm", "mpll", 1, aad->arm);
+
+ if (clk_get_rate(clks[arm]) > 400000000)
+ hsp_div = hsp_div_532;
+ else
+ hsp_div = hsp_div_400;
+
+ hsp_sel = (pdr0 >> 20) & 0x3;
+ if (!hsp_div[hsp_sel]) {
+ pr_err("i.MX35 clk: illegal hsp clk selection 0x%x\n", hsp_sel);
+ hsp_sel = 0;
+ }
+
+ clks[hsp] = imx_clk_fixed_factor("hsp", "arm", 1, hsp_div[hsp_sel]);
+
+ clks[ahb] = imx_clk_fixed_factor("ahb", "arm", 1, aad->ahb);
+ clks[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
+
+ clks[arm_per_div] = imx_clk_divider("arm_per_div", "arm", base + CCM_PDR4, 16, 6);
+ clks[ahb_per_div] = imx_clk_divider("ahb_per_div", "ahb", base + CCM_PDR0, 12, 3);
+ clks[ipg_per] = imx_clk_mux("ipg_per", base + CCM_PDR0, 26, 1, ipg_per_sel, ARRAY_SIZE(ipg_per_sel));
+
+ clks[uart_sel] = imx_clk_mux("uart_sel", base + CCM_PDR3, 14, 1, std_sel, ARRAY_SIZE(std_sel));
+ clks[uart_div] = imx_clk_divider("uart_div", "uart_sel", base + CCM_PDR4, 10, 6);
+
+ clks[esdhc_sel] = imx_clk_mux("esdhc_sel", base + CCM_PDR4, 9, 1, std_sel, ARRAY_SIZE(std_sel));
+ clks[esdhc1_div] = imx_clk_divider("esdhc1_div", "esdhc_sel", base + CCM_PDR3, 0, 6);
+ clks[esdhc2_div] = imx_clk_divider("esdhc2_div", "esdhc_sel", base + CCM_PDR3, 8, 6);
+ clks[esdhc3_div] = imx_clk_divider("esdhc3_div", "esdhc_sel", base + CCM_PDR3, 16, 6);
+
+ clks[usb_sel] = imx_clk_mux("usb_sel", base + CCM_PDR4, 9, 1, std_sel, ARRAY_SIZE(std_sel));
+ clks[usb_div] = imx_clk_divider("usb_div", "usb_sel", base + CCM_PDR4, 22, 6);
+
+ clkdev_add_physbase(clks[uart_div], MX35_UART1_BASE_ADDR, NULL);
+ clkdev_add_physbase(clks[uart_div], MX35_UART2_BASE_ADDR, NULL);
+ clkdev_add_physbase(clks[uart_div], MX35_UART3_BASE_ADDR, NULL);
+ clkdev_add_physbase(clks[ipg_per], MX35_I2C1_BASE_ADDR, NULL);
+ clkdev_add_physbase(clks[ipg_per], MX35_I2C2_BASE_ADDR, NULL);
+ clkdev_add_physbase(clks[ipg_per], MX35_I2C3_BASE_ADDR, NULL);
+ clkdev_add_physbase(clks[ipg], MX35_CSPI1_BASE_ADDR, NULL);
+ clkdev_add_physbase(clks[ipg], MX35_CSPI2_BASE_ADDR, NULL);
+ clkdev_add_physbase(clks[ipg], MX35_FEC_BASE_ADDR, NULL);
+ clkdev_add_physbase(clks[ipg], MX35_GPT1_BASE_ADDR, NULL);
+ clkdev_add_physbase(clks[esdhc1_div], MX35_ESDHC1_BASE_ADDR, NULL);
+ clkdev_add_physbase(clks[esdhc2_div], MX35_ESDHC2_BASE_ADDR, NULL);
+ clkdev_add_physbase(clks[esdhc3_div], MX35_ESDHC3_BASE_ADDR, NULL);
+ clkdev_add_physbase(clks[hsp], MX35_IPU_CTRL_BASE_ADDR, NULL);
+
+ return 0;
+}
+
+static struct driver_d imx35_ccm_driver = {
+ .probe = imx35_ccm_probe,
+ .name = "imx35-ccm",
+};
+
+static int imx35_ccm_init(void)
+{
+ return register_driver(&imx35_ccm_driver);
+}
+postcore_initcall(imx35_ccm_init);
diff --git a/arch/arm/mach-imx/imx35.c b/arch/arm/mach-imx/imx35.c
index 2a9f576..722dd4c 100644
--- a/arch/arm/mach-imx/imx35.c
+++ b/arch/arm/mach-imx/imx35.c
@@ -61,6 +61,7 @@ static int imx35_init(void)
add_generic_device("imx_iim", 0, NULL, MX35_IIM_BASE_ADDR, SZ_4K,
IORESOURCE_MEM, NULL);
+ add_generic_device("imx35-ccm", 0, NULL, MX35_CCM_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
add_generic_device("imx31-gpt", 0, NULL, MX35_GPT1_BASE_ADDR, 0x100, IORESOURCE_MEM, NULL);
add_generic_device("imx-gpio", 0, NULL, MX35_GPIO1_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
add_generic_device("imx-gpio", 1, NULL, MX35_GPIO2_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
@@ -68,4 +69,4 @@ static int imx35_init(void)
return 0;
}
-coredevice_initcall(imx35_init);
+postcore_initcall(imx35_init);
--
1.7.10.4
More information about the barebox
mailing list