[PATCH 0/7] [RFC][PATCH] archosg9: add support for tablet

[Sascha Hauer]

On Wed, Sep 26, 2012 at 12:59:47AM +0200, vj wrote:
> Hello,
> A this is my first contribution, so I'm basically requesting for comments.
> 
> The attached patch adds support for Archos G9 tablet wich uses an OMAP4460 cpu.

Nice :)
I should have bought that one instead of a Acer.


> 
> A question I have is what does omap_vector_init do?
> It breaks usb-booting.

I digged around a bit. The funny thing is that this was introduced with
OMAP4 support and is only done on OMAP4. U-Boot instead has the following:

> #if !defined(CONFIG_TEGRA2)
> /*
>  * Setup vector:
>  * (OMAP4 spl TEXT_BASE is not 32 byte aligned.
>  * Continue to use ROM code vector only in OMAP4 spl)
>  */
> #if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD))
> 	/* Set V=0 in CP15 SCTRL register - for VBAR to point to vector
>  * */
> 	mrc	p15, 0, r0, c1, c0, 0	@ Read CP15 SCTRL Register
> 	bic	r0, #CR_V		@ V = 0
> 	mcr	p15, 0, r0, c1, c0, 0	@ Write CP15 SCTRL Register
> 
> 	/* Set vector address in CP15 VBAR register */
> 	ldr	r0, =_start
> 	mcr	p15, 0, r0, c12, c0, 0	@Set VBAR
> #endif
> #endif	/* !Tegra2 */

So in U-Boot it's done for every ARMv7 *except* OMAP4 (and Tegra)

ARM has this information about it:

http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0434b/CIHHDAIH.html

> Purpose
> 
>     Provides the exception base address for exceptions that are not
>     handled in monitor mode.
> 
> Usage constraints
> 
>     The VBAR is:
> 
>         * only accessible in privileged modes
>         * only accessible in Secure state.

I think this is necessary to move the exception vector from ROM to our
own code. Does it work to read the VBAR register using the following
instruction:

	MRC p15, 0, <Rd>, c12, c0, 0 ; Read VBAR Register

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |