[PATCH 0/7] [RFC][PATCH] archosg9: add support for tablet
Antony Pavlov
antonynpavlov at gmail.com
Tue Sep 25 23:57:13 EDT 2012
Hi!
You have did a good job!
But please check your patch series with the scripts/checkpatch.pl
script before submiting it to the maillist.
On 26 September 2012 02:59, vj <vicencb at gmail.com> wrote:
> Hello,
> A this is my first contribution, so I'm basically requesting for comments.
>
> The attached patch adds support for Archos G9 tablet wich uses an OMAP4460 cpu.
> The tablet by default only boots from internal flash, so to test barebox on it a hardware tweak is required: change the sys_boot configuration.
> Once done the tablet can be booted with the following command:
> A sudo scripts/usbboot <first_stage> <rootfs>
>
> The patch contains
> A 1.- specific changes for OMAP4460
> A 2.- support for usb-booting
> A 3.- support for console on usb
> A 4.- support for file transfer through usb
> A 5.- some minor bug fixes
> A 6.- adds support for archosg9 board
>
> A question I have is what does omap_vector_init do?
> It breaks usb-booting.
> An improvement to be done would be to split the file "scripts/usbboot.c" into a header and two c files, but the Makefile framework seemed to me to do not allow that.
>
> In any case the patch should be tested with other boards to check it does not breaks something.
>
> vj (7):
> Improved an error message and solved a minor bug
> added debug info for twl6030
> OMAP specific changes
> Add USB booting capabilities to OMAP
> add console support over the same USB used for booting
> add filesystem support over the same USB used for booting
> Add support for Archos G9 tablet
>
> arch/arm/Makefile | 1 +
> arch/arm/boards/archosg9/Makefile | 1 +
> arch/arm/boards/archosg9/board.c | 58 ++
> arch/arm/boards/archosg9/env/bin/init | 18 +
> arch/arm/boards/archosg9/env/config | 2 +
> arch/arm/boards/archosg9/lowlevel.c | 126 ++++
> arch/arm/boards/archosg9/mux.c | 226 +++++++
> arch/arm/configs/archosg9_defconfig | 70 +++
> arch/arm/configs/archosg9_xload_defconfig | 25 +
> arch/arm/cpu/cpu.c | 1 +
> arch/arm/lib/armlinux.c | 2 +-
> arch/arm/lib/barebox.lds.S | 10 +
> arch/arm/mach-omap/Kconfig | 30 +
> arch/arm/mach-omap/Makefile | 1 +
> arch/arm/mach-omap/include/mach/omap4-mux.h | 80 ++-
> arch/arm/mach-omap/include/mach/omap4-silicon.h | 13 +
> arch/arm/mach-omap/include/mach/omap4_rom_usb.h | 146 +++++
> arch/arm/mach-omap/include/mach/xload.h | 1 +
> arch/arm/mach-omap/omap4_generic.c | 6 +
> arch/arm/mach-omap/omap4_rom_usb.c | 189 ++++++
> arch/arm/mach-omap/xload.c | 26 +
> arch/arm/tools/mach-types | 1 +
> drivers/mci/omap_hsmmc.c | 2 +-
> drivers/mfd/twl6030.c | 13 +
> drivers/serial/Kconfig | 7 +
> drivers/serial/Makefile | 1 +
> drivers/serial/serial_usb.c | 64 ++
> fs/Kconfig | 5 +
> fs/Makefile | 1 +
> fs/usbbootfs.c | 195 ++++++
> include/mfd/twl6030.h | 8 +
> scripts/.gitignore | 1 +
> scripts/Makefile | 3 +
> scripts/usbboot.c | 797 ++++++++++++++++++++++++
> 34 files changed, 2100 insertions(+), 30 deletions(-)
> create mode 100644 arch/arm/boards/archosg9/Makefile
> create mode 100644 arch/arm/boards/archosg9/board.c
> create mode 100644 arch/arm/boards/archosg9/env/bin/init
> create mode 100644 arch/arm/boards/archosg9/env/config
> create mode 100644 arch/arm/boards/archosg9/lowlevel.c
> create mode 100644 arch/arm/boards/archosg9/mux.c
> create mode 100644 arch/arm/configs/archosg9_defconfig
> create mode 100644 arch/arm/configs/archosg9_xload_defconfig
> create mode 100644 arch/arm/mach-omap/include/mach/omap4_rom_usb.h
> create mode 100644 arch/arm/mach-omap/omap4_rom_usb.c
> create mode 100644 drivers/serial/serial_usb.c
> create mode 100644 fs/usbbootfs.c
> create mode 100644 scripts/usbboot.c
>
> --
> 1.7.12.1
>
>
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
--
Best regards,
Antony Pavlov
More information about the barebox
mailing list