[for next PATCH 1/1] macb: fix typos in the phy_interface

[Jean-Christophe PLAGNIOL-VILLARD]

the RMII is set a RGMII and the flags are only check if MII

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
 drivers/net/macb.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 15548cf..64970ba 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -439,13 +439,13 @@ static int macb_probe(struct device_d *dev)
 	macb->miibus.priv = macb;
 	macb->miibus.parent = dev;
 
-	if (pdata->flags & AT91SAM_ETHER_RMII) {
-		macb->interface = PHY_INTERFACE_MODE_RGMII;
-	} else {
+	if (pdata->flags & AT91SAM_ETHER_RMII)
+		macb->interface = PHY_INTERFACE_MODE_RMII;
+	else
 		macb->interface = PHY_INTERFACE_MODE_MII;
-		macb->phy_flags = pdata->flags & AT91SAM_ETHER_FORCE_LINK ?
+
+	macb->phy_flags = pdata->flags & AT91SAM_ETHER_FORCE_LINK ?
 					PHYLIB_FORCE_LINK : 0;
-	}
 
 	macb->rx_buffer = dma_alloc_coherent(CFG_MACB_RX_BUFFER_SIZE);
 	macb->rx_ring = dma_alloc_coherent(CFG_MACB_RX_RING_SIZE * sizeof(struct macb_dma_desc));
-- 
1.7.10.4