[PATCH] ARM: enable MMU in pbl

[Sascha Hauer]

On Thu, Sep 20, 2012 at 08:52:43PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 16:30 Sun 12 Aug     , Sascha Hauer wrote:
> > The following enables the MMU during decompression which speeds up
> > things significantly.
> 
> Atmel board does not boot
> 
> barebox at Atmel at91sam9m10g45-ek:/ dhcp && nfs
> /opt/work/barebox/build/sam9m10g45ek-compressed/arch/arm/pbl/zbarebox.bin &&
> bootm zbarebox.bin
> phy0: Link is up - 100/Full
> DHCP client bound to address 192.168.200.43
> 
> Filename
> '/opt/work/barebox/build/sam9m10g45ek-compressed/arch/arm/pbl/zbarebox.bin'.
> 	[#################################################################]
> 
> without MMU boot fine

does it work with the v1 version of this patch?

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |