[PATCH] ARM: enable MMU in pbl

Jean-Christophe PLAGNIOL-VILLARD plagnioj at jcrosoft.com
Thu Sep 20 14:52:43 EDT 2012


On 16:30 Sun 12 Aug     , Sascha Hauer wrote:
> The following enables the MMU during decompression which speeds up
> things significantly.

Atmel board does not boot

barebox at Atmel at91sam9m10g45-ek:/ dhcp && nfs
/opt/work/barebox/build/sam9m10g45ek-compressed/arch/arm/pbl/zbarebox.bin &&
bootm zbarebox.bin
phy0: Link is up - 100/Full
DHCP client bound to address 192.168.200.43

Filename
'/opt/work/barebox/build/sam9m10g45ek-compressed/arch/arm/pbl/zbarebox.bin'.
	[#################################################################]

without MMU boot fine

Best Regards,
J.



More information about the barebox mailing list