[PATCH 3/3] miidev: fix 1G wrong detection
Eric Bénard
eric at eukrea.com
Fri Sep 7 03:28:30 EDT 2012
Le Fri, 7 Sep 2012 08:44:19 +0200,
Sascha Hauer <s.hauer at pengutronix.de> a écrit :
> On Thu, Sep 06, 2012 at 09:39:31PM +0200, Eric Bénard wrote:
> > since 99e72c8bbdbdc690025a5868d831f1fe79ad56fc on an i.MX51 based board,
> > I get : "phy0: Link is up - 1000/Full". It seems miidev tries to probe
> > the PHY to early and gets 0x3ffff which leads to the wrong capabilities
> > setting.
> >
> > Signed-off-by: Eric Bénard <eric at eukrea.com>
> > ---
> > drivers/net/miidev.c | 33 +++++++++------------------------
> > 1 files changed, 9 insertions(+), 24 deletions(-)
> >
> > diff --git a/drivers/net/miidev.c b/drivers/net/miidev.c
> > index 75b53e3..e0f9d67 100644
> > --- a/drivers/net/miidev.c
> > +++ b/drivers/net/miidev.c
> > @@ -131,6 +131,14 @@ int miidev_get_status(struct mii_device *mdev)
> >
> > status = ret & BMSR_LSTATUS ? MIIDEV_STATUS_IS_UP : 0;
> >
> > + if (ret & BMSR_ESTATEN) {
> > + ret = mii_read(mdev, mdev->address, MII_ESTATUS);
> > + if (ret < 0)
> > + goto err_out;
> > + if (ret & (ESTATUS_1000_TFULL | ESTATUS_1000_THALF))
> > + mdev->capabilities = MIIDEV_CAPABLE_1000M;
> > + }
> > +
> > ret = mii_read(mdev, mdev->address, MII_BMCR);
> > if (ret < 0)
> > goto err_out;
> > @@ -239,27 +247,8 @@ static struct file_operations miidev_ops = {
> > static int miidev_probe(struct device_d *dev)
> > {
> > struct mii_device *mdev = dev->priv;
> > - int val;
> > - int caps = 0;
> >
> > - val = mii_read(mdev, mdev->address, MII_PHYSID1);
> > - if (val < 0 || val == 0xffff)
> > - goto err_out;
> > - val = mii_read(mdev, mdev->address, MII_PHYSID2);
> > - if (val < 0 || val == 0xffff)
> > - goto err_out;
>
> Is the above necessary? This was present before the patch which made the
> regression.
>
well there is no interest as we don't check the value read (and in the
present case I also get 0x3ffff here).
Eric
More information about the barebox
mailing list