MLO doesn't work, rest is ok

[Jan Weitzel]

Am Dienstag, den 04.09.2012, 18:31 +0200 schrieb Norbert Roos:
> Hello,
> 
> I just wanted to try the freshly generated MLO and barebox.bin on my 
> Phytec PCM049 board (OMAP4 based). Copied both files to the FAT 
> partition on the SD card.
> 
> Unfortunately it doesn't boot, after trying to boot from SD card the ROM 
> boot loader oviously skips to booting from UART.
> 
> When i replace the MLO with a different one (downloaded a compiled one), 
> my generated barebox.bin gets loaded and everything's fine.
> 
> Is there a simple way for debugging it? It seems like the MLO does not 
> get executed, as the ROM boot skips to UART boot...
> 
> bye
> Norbert

Hi,
which barebox version? Is the board with OMAP4460?
Jan

> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox