[PATCH 03/14] ARM i.MX21: give register base addresses a proper MX21_ prefix
Sascha Hauer
s.hauer at pengutronix.de
Mon Sep 24 06:46:12 EDT 2012
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
arch/arm/boards/imx21ads/imx21ads.c | 6 +-
arch/arm/boards/imx21ads/lowlevel_init.S | 4 +-
arch/arm/mach-imx/imx21.c | 16 +--
arch/arm/mach-imx/include/mach/devices-imx21.h | 8 +-
arch/arm/mach-imx/include/mach/imx21-regs.h | 179 +++++++++++++++---------
5 files changed, 132 insertions(+), 81 deletions(-)
diff --git a/arch/arm/boards/imx21ads/imx21ads.c b/arch/arm/boards/imx21ads/imx21ads.c
index 1aecf18..42b0162 100644
--- a/arch/arm/boards/imx21ads/imx21ads.c
+++ b/arch/arm/boards/imx21ads/imx21ads.c
@@ -163,9 +163,11 @@ static int mx21ads_devices_init(void)
for (i = 0; i < ARRAY_SIZE(mode); i++)
imx_gpio_mode(mode[i]);
- add_cfi_flash_device(DEVICE_ID_DYNAMIC, 0xC8000000, 32 * 1024 * 1024, 0);
+ add_cfi_flash_device(DEVICE_ID_DYNAMIC, MX21_CS0_BASE_ADDR,
+ 32 * 1024 * 1024, 0);
imx21_add_nand(&nand_info);
- add_generic_device("cs8900", DEVICE_ID_DYNAMIC, NULL, IMX_CS1_BASE, 0x1000,
+ add_generic_device("cs8900", DEVICE_ID_DYNAMIC, NULL,
+ MX21_CS1_BASE_ADDR, 0x1000,
IORESOURCE_MEM, NULL);
imx21_add_fb(&imx_fb_data);
diff --git a/arch/arm/boards/imx21ads/lowlevel_init.S b/arch/arm/boards/imx21ads/lowlevel_init.S
index 961029b..03b62df 100644
--- a/arch/arm/boards/imx21ads/lowlevel_init.S
+++ b/arch/arm/boards/imx21ads/lowlevel_init.S
@@ -120,8 +120,8 @@ board_init_lowlevel:
#ifdef CONFIG_NAND_IMX_BOOT
ldr sp, =STACK_BASE + STACK_SIZE - 12 /* Setup a temporary stack in SDRAM */
- ldr r0, =IMX_NFC_BASE /* start of NFC SRAM */
- ldr r2, =IMX_NFC_BASE + 0x800 /* end of NFC SRAM */
+ ldr r0, =MX21_NFC_BASE_ADDR /* start of NFC SRAM */
+ ldr r2, =MX21_NFC_BASE_ADDR + 0x800 /* end of NFC SRAM */
/* skip NAND boot if not running from NFC space */
cmp pc, r0
diff --git a/arch/arm/mach-imx/imx21.c b/arch/arm/mach-imx/imx21.c
index df3eaf2..8d909ce 100644
--- a/arch/arm/mach-imx/imx21.c
+++ b/arch/arm/mach-imx/imx21.c
@@ -25,14 +25,14 @@ int imx_silicon_revision(void)
static int imx21_init(void)
{
- add_generic_device("imx1-gpt", 0, NULL, 0x10003000, 0x100, IORESOURCE_MEM, NULL);
- add_generic_device("imx1-gpio", 0, NULL, 0x10015000, 0x100, IORESOURCE_MEM, NULL);
- add_generic_device("imx1-gpio", 1, NULL, 0x10015100, 0x100, IORESOURCE_MEM, NULL);
- add_generic_device("imx1-gpio", 2, NULL, 0x10015200, 0x100, IORESOURCE_MEM, NULL);
- add_generic_device("imx1-gpio", 3, NULL, 0x10015300, 0x100, IORESOURCE_MEM, NULL);
- add_generic_device("imx1-gpio", 4, NULL, 0x10015400, 0x100, IORESOURCE_MEM, NULL);
- add_generic_device("imx1-gpio", 5, NULL, 0x10015500, 0x100, IORESOURCE_MEM, NULL);
+ add_generic_device("imx1-gpt", 0, NULL, MX21_GPT1_BASE_ADDR, 0x100, IORESOURCE_MEM, NULL);
+ add_generic_device("imx-gpio", 0, NULL, MX21_GPIO1_BASE_ADDR, 0x100, IORESOURCE_MEM, NULL);
+ add_generic_device("imx-gpio", 1, NULL, MX21_GPIO2_BASE_ADDR, 0x100, IORESOURCE_MEM, NULL);
+ add_generic_device("imx-gpio", 2, NULL, MX21_GPIO3_BASE_ADDR, 0x100, IORESOURCE_MEM, NULL);
+ add_generic_device("imx-gpio", 3, NULL, MX21_GPIO4_BASE_ADDR, 0x100, IORESOURCE_MEM, NULL);
+ add_generic_device("imx-gpio", 4, NULL, MX21_GPIO5_BASE_ADDR, 0x100, IORESOURCE_MEM, NULL);
+ add_generic_device("imx-gpio", 5, NULL, MX21_GPIO6_BASE_ADDR, 0x100, IORESOURCE_MEM, NULL);
return 0;
}
-coredevice_initcall(imx21_init);
+postcore_initcall(imx21_init);
diff --git a/arch/arm/mach-imx/include/mach/devices-imx21.h b/arch/arm/mach-imx/include/mach/devices-imx21.h
index 1e1fbbd..31c5f8c 100644
--- a/arch/arm/mach-imx/include/mach/devices-imx21.h
+++ b/arch/arm/mach-imx/include/mach/devices-imx21.h
@@ -3,22 +3,22 @@
static inline struct device_d *imx21_add_uart0(void)
{
- return imx_add_uart((void *)IMX_UART1_BASE, 0);
+ return imx_add_uart((void *)MX21_UART1_BASE_ADDR, 0);
}
static inline struct device_d *imx21_add_uart1(void)
{
- return imx_add_uart((void *)IMX_UART2_BASE, 1);
+ return imx_add_uart((void *)MX21_UART2_BASE_ADDR, 1);
}
static inline struct device_d *imx21_add_uart2(void)
{
- return imx_add_uart((void *)IMX_UART3_BASE, 2);
+ return imx_add_uart((void *)MX21_UART2_BASE_ADDR, 2);
}
static inline struct device_d *imx21_add_uart3(void)
{
- return imx_add_uart((void *)IMX_UART4_BASE, 3);
+ return imx_add_uart((void *)MX21_UART2_BASE_ADDR, 3);
}
static inline struct device_d *imx21_add_nand(struct imx_nand_platform_data *pdata)
diff --git a/arch/arm/mach-imx/include/mach/imx21-regs.h b/arch/arm/mach-imx/include/mach/imx21-regs.h
index 98e73ef..e58af72 100644
--- a/arch/arm/mach-imx/include/mach/imx21-regs.h
+++ b/arch/arm/mach-imx/include/mach/imx21-regs.h
@@ -5,40 +5,96 @@
#error "Please do not include directly"
#endif
-#define IMX_IO_BASE 0x10000000
-
-#define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE)
-#define IMX_WDT_BASE (0x02000 + IMX_IO_BASE)
-#define IMX_TIM1_BASE (0x03000 + IMX_IO_BASE)
-#define IMX_TIM2_BASE (0x04000 + IMX_IO_BASE)
-#define IMX_TIM3_BASE (0x05000 + IMX_IO_BASE)
-#define IMX_UART1_BASE (0x0a000 + IMX_IO_BASE)
-#define IMX_UART2_BASE (0x0b000 + IMX_IO_BASE)
-#define IMX_UART3_BASE (0x0c000 + IMX_IO_BASE)
-#define IMX_UART4_BASE (0x0d000 + IMX_IO_BASE)
-#define IMX_GPIO_BASE (0x15000 + IMX_IO_BASE)
-#define IMX_AIPI2_BASE (0x20000 + IMX_IO_BASE)
-#define IMX_PLL_BASE (0x27000 + IMX_IO_BASE)
-#define IMX_SYSTEM_CTL_BASE (0x27800 + IMX_IO_BASE)
-
-#define IMX_SDRAM_BASE (0xdf000000)
-#define IMX_EIM_BASE (0xdf001000)
-#define IMX_NFC_BASE (0xdf003000)
+#define MX21_AIPI_BASE_ADDR 0x10000000
+#define MX21_AIPI_SIZE SZ_1M
+#define MX21_DMA_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x01000)
+#define MX21_WDOG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x02000)
+#define MX21_GPT1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x03000)
+#define MX21_GPT2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x04000)
+#define MX21_GPT3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x05000)
+#define MX21_PWM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x06000)
+#define MX21_RTC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x07000)
+#define MX21_KPP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x08000)
+#define MX21_OWIRE_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x09000)
+#define MX21_UART1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0a000)
+#define MX21_UART2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0b000)
+#define MX21_UART3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0c000)
+#define MX21_UART4_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0d000)
+#define MX21_CSPI1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0e000)
+#define MX21_CSPI2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0f000)
+#define MX21_SSI1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x10000)
+#define MX21_SSI2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x11000)
+#define MX21_I2C_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x12000)
+#define MX21_SDHC1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x13000)
+#define MX21_SDHC2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x14000)
+#define MX21_GPIO_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x15000)
+#define MX21_GPIO1_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x000)
+#define MX21_GPIO2_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x100)
+#define MX21_GPIO3_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x200)
+#define MX21_GPIO4_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x300)
+#define MX21_GPIO5_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x400)
+#define MX21_GPIO6_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x500)
+#define MX21_AUDMUX_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x16000)
+#define MX21_CSPI3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x17000)
+#define MX21_LCDC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x21000)
+#define MX21_SLCDC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x22000)
+#define MX21_USBOTG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x24000)
+#define MX21_EMMA_PP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x26000)
+#define MX21_EMMA_PRP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x26400)
+#define MX21_CCM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x27000)
+#define MX21_SYSCTRL_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x27800)
+#define MX21_JAM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x3e000)
+#define MX21_MAX_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x3f000)
+
+#define MX21_AVIC_BASE_ADDR 0x10040000
+
+#define MX21_SAHB1_BASE_ADDR 0x80000000
+#define MX21_SAHB1_SIZE SZ_1M
+#define MX21_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000)
+
+/* Memory regions and CS */
+#define MX21_SDRAM_BASE_ADDR 0xc0000000
+#define MX21_CSD1_BASE_ADDR 0xc4000000
+
+#define MX21_CS0_BASE_ADDR 0xc8000000
+#define MX21_CS1_BASE_ADDR 0xcc000000
+#define MX21_CS2_BASE_ADDR 0xd0000000
+#define MX21_CS3_BASE_ADDR 0xd1000000
+#define MX21_CS4_BASE_ADDR 0xd2000000
+#define MX21_PCMCIA_MEM_BASE_ADDR 0xd4000000
+#define MX21_CS5_BASE_ADDR 0xdd000000
+
+/* NAND, SDRAM, WEIM etc controllers */
+#define MX21_X_MEMC_BASE_ADDR 0xdf000000
+#define MX21_X_MEMC_SIZE SZ_256K
+
+#define MX21_SDRAMC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x0000)
+#define MX21_EIM_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x1000)
+#define MX21_PCMCIA_CTL_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x2000)
+#define MX21_NFC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x3000)
+
+#define MX21_IRAM_BASE_ADDR 0xffffe800 /* internal ram */
+
+/* FIXME: Get rid of these */
+#define IMX_GPIO_BASE MX21_GPIO_BASE_ADDR
+#define IMX_TIM1_BASE MX21_GPT1_BASE_ADDR
+#define IMX_WDT_BASE MX21_WDOG_BASE_ADDR
+#define IMX_SYSTEM_CTL_BASE MX21_SYSCTRL_BASE_ADDR
/* AIPI */
-#define AIPI1_PSR0 __REG(IMX_AIPI1_BASE + 0x00)
-#define AIPI1_PSR1 __REG(IMX_AIPI1_BASE + 0x04)
-#define AIPI2_PSR0 __REG(IMX_AIPI2_BASE + 0x00)
-#define AIPI2_PSR1 __REG(IMX_AIPI2_BASE + 0x04)
+#define AIPI1_PSR0 __REG(MX21_AIPI_BASE_ADDR + 0x00)
+#define AIPI1_PSR1 __REG(MX21_AIPI_BASE_ADDR + 0x04)
+#define AIPI2_PSR0 __REG(MX21_AIPI_BASE_ADDR + 0x20000 + 0x00)
+#define AIPI2_PSR1 __REG(MX21_AIPI_BASE_ADDR + 0x20000 + 0x04)
/* System Control */
-#define SUID0 __REG(IMX_SYSTEM_CTL_BASE + 0x4) /* Silicon ID Register (12 bytes) */
-#define SUID1 __REG(IMX_SYSTEM_CTL_BASE + 0x8) /* Silicon ID Register (12 bytes) */
-#define CID __REG(IMX_SYSTEM_CTL_BASE + 0xC) /* Silicon ID Register (12 bytes) */
-#define FMCR __REG(IMX_SYSTEM_CTL_BASE + 0x14) /* Function Multeplexing Control Register */
-#define GPCR __REG(IMX_SYSTEM_CTL_BASE + 0x18) /* Global Peripheral Control Register */
-#define WBCR __REG(IMX_SYSTEM_CTL_BASE + 0x1C) /* Well Bias Control Register */
-#define DSCR(x) __REG(IMX_SYSTEM_CTL_BASE + 0x1C + ((x) << 2)) /* Driving Strength Control Register 1 - 13 */
+#define SUID0 __REG(MX21_SYSCTRL_BASE_ADDR + 0x4) /* Silicon ID Register (12 bytes) */
+#define SUID1 __REG(MX21_SYSCTRL_BASE_ADDR + 0x8) /* Silicon ID Register (12 bytes) */
+#define CID __REG(MX21_SYSCTRL_BASE_ADDR + 0xC) /* Silicon ID Register (12 bytes) */
+#define FMCR __REG(MX21_SYSCTRL_BASE_ADDR + 0x14) /* Function Multeplexing Control Register */
+#define GPCR __REG(MX21_SYSCTRL_BASE_ADDR + 0x18) /* Global Peripheral Control Register */
+#define WBCR __REG(MX21_SYSCTRL_BASE_ADDR + 0x1C) /* Well Bias Control Register */
+#define DSCR(x) __REG(MX21_SYSCTRL_BASE_ADDR + 0x1C + ((x) << 2)) /* Driving Strength Control Register 1 - 13 */
#define GPCR_BOOT_SHIFT 16
#define GPCR_BOOT_MASK (0xf << GPCR_BOOT_SHIFT)
@@ -51,39 +107,39 @@
#define GPCR_BOOT_8BIT_NAND_512 7
/* SDRAM Controller registers bitfields */
-#define SDCTL0 __REG(IMX_SDRAM_BASE + 0x00) /* SDRAM 0 Control Register */
-#define SDCTL1 __REG(IMX_SDRAM_BASE + 0x04) /* SDRAM 0 Control Register */
-#define SDRST __REG(IMX_SDRAM_BASE + 0x18) /* SDRAM Reset Register */
-#define SDMISC __REG(IMX_SDRAM_BASE + 0x14) /* SDRAM Miscellaneous Register */
+#define SDCTL0 __REG(MX21_X_MEMC_BASE_ADDR + 0x00) /* SDRAM 0 Control Register */
+#define SDCTL1 __REG(MX21_X_MEMC_BASE_ADDR + 0x04) /* SDRAM 0 Control Register */
+#define SDRST __REG(MX21_X_MEMC_BASE_ADDR + 0x18) /* SDRAM Reset Register */
+#define SDMISC __REG(MX21_X_MEMC_BASE_ADDR + 0x14) /* SDRAM Miscellaneous Register */
/* Chip Select Registers */
-#define CS0U __REG(IMX_EIM_BASE + 0x00) /* Chip Select 0 Upper Register */
-#define CS0L __REG(IMX_EIM_BASE + 0x04) /* Chip Select 0 Lower Register */
-#define CS1U __REG(IMX_EIM_BASE + 0x08) /* Chip Select 1 Upper Register */
-#define CS1L __REG(IMX_EIM_BASE + 0x0C) /* Chip Select 1 Lower Register */
-#define CS2U __REG(IMX_EIM_BASE + 0x10) /* Chip Select 2 Upper Register */
-#define CS2L __REG(IMX_EIM_BASE + 0x14) /* Chip Select 2 Lower Register */
-#define CS3U __REG(IMX_EIM_BASE + 0x18) /* Chip Select 3 Upper Register */
-#define CS3L __REG(IMX_EIM_BASE + 0x1C) /* Chip Select 3 Lower Register */
-#define CS4U __REG(IMX_EIM_BASE + 0x20) /* Chip Select 4 Upper Register */
-#define CS4L __REG(IMX_EIM_BASE + 0x24) /* Chip Select 4 Lower Register */
-#define CS5U __REG(IMX_EIM_BASE + 0x28) /* Chip Select 5 Upper Register */
-#define CS5L __REG(IMX_EIM_BASE + 0x2C) /* Chip Select 5 Lower Register */
-#define EIM __REG(IMX_EIM_BASE + 0x30) /* EIM Configuration Register */
+#define CS0U __REG(MX21_EIM_BASE_ADDR + 0x00) /* Chip Select 0 Upper Register */
+#define CS0L __REG(MX21_EIM_BASE_ADDR + 0x04) /* Chip Select 0 Lower Register */
+#define CS1U __REG(MX21_EIM_BASE_ADDR + 0x08) /* Chip Select 1 Upper Register */
+#define CS1L __REG(MX21_EIM_BASE_ADDR + 0x0C) /* Chip Select 1 Lower Register */
+#define CS2U __REG(MX21_EIM_BASE_ADDR + 0x10) /* Chip Select 2 Upper Register */
+#define CS2L __REG(MX21_EIM_BASE_ADDR + 0x14) /* Chip Select 2 Lower Register */
+#define CS3U __REG(MX21_EIM_BASE_ADDR + 0x18) /* Chip Select 3 Upper Register */
+#define CS3L __REG(MX21_EIM_BASE_ADDR + 0x1C) /* Chip Select 3 Lower Register */
+#define CS4U __REG(MX21_EIM_BASE_ADDR + 0x20) /* Chip Select 4 Upper Register */
+#define CS4L __REG(MX21_EIM_BASE_ADDR + 0x24) /* Chip Select 4 Lower Register */
+#define CS5U __REG(MX21_EIM_BASE_ADDR + 0x28) /* Chip Select 5 Upper Register */
+#define CS5L __REG(MX21_EIM_BASE_ADDR + 0x2C) /* Chip Select 5 Lower Register */
+#define EIM __REG(MX21_EIM_BASE_ADDR + 0x30) /* EIM Configuration Register */
/* PLL registers */
-#define CSCR __REG(IMX_PLL_BASE + 0x00) /* Clock Source Control Register */
-#define MPCTL0 __REG(IMX_PLL_BASE + 0x04) /* MCU PLL Control Register 0 */
-#define MPCTL1 __REG(IMX_PLL_BASE + 0x08) /* MCU PLL Control Register 1 */
-#define SPCTL0 __REG(IMX_PLL_BASE + 0x0c) /* System PLL Control Register 0 */
-#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
-#define OSC26MCTL __REG(IMX_PLL_BASE + 0x14) /* Oscillator 26M Register */
-#define PCDR0 __REG(IMX_PLL_BASE + 0x18) /* Peripheral Clock Divider Register 0 */
-#define PCDR1 __REG(IMX_PLL_BASE + 0x1c) /* Peripheral Clock Divider Register 1 */
-#define PCCR0 __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Control Register 0 */
-#define PCCR1 __REG(IMX_PLL_BASE + 0x24) /* Peripheral Clock Control Register 1 */
-#define CCSR __REG(IMX_PLL_BASE + 0x28) /* Clock Control Status Register */
+#define CSCR __REG(MX21_CCM_BASE_ADDR + 0x00) /* Clock Source Control Register */
+#define MPCTL0 __REG(MX21_CCM_BASE_ADDR + 0x04) /* MCU PLL Control Register 0 */
+#define MPCTL1 __REG(MX21_CCM_BASE_ADDR + 0x08) /* MCU PLL Control Register 1 */
+#define SPCTL0 __REG(MX21_CCM_BASE_ADDR + 0x0c) /* System PLL Control Register 0 */
+#define SPCTL1 __REG(MX21_CCM_BASE_ADDR + 0x10) /* System PLL Control Register 1 */
+#define OSC26MCTL __REG(MX21_CCM_BASE_ADDR + 0x14) /* Oscillator 26M Register */
+#define PCDR0 __REG(MX21_CCM_BASE_ADDR + 0x18) /* Peripheral Clock Divider Register 0 */
+#define PCDR1 __REG(MX21_CCM_BASE_ADDR + 0x1c) /* Peripheral Clock Divider Register 1 */
+#define PCCR0 __REG(MX21_CCM_BASE_ADDR + 0x20) /* Peripheral Clock Control Register 0 */
+#define PCCR1 __REG(MX21_CCM_BASE_ADDR + 0x24) /* Peripheral Clock Control Register 1 */
+#define CCSR __REG(MX21_CCM_BASE_ADDR + 0x28) /* Clock Control Status Register */
#define CSCR_MPEN (1 << 0)
#define CSCR_SPEN (1 << 1)
@@ -107,11 +163,4 @@
#define CCSR_32K_SR (1 << 15)
-#define IMX_CS0_BASE 0xC8000000
-#define IMX_CS1_BASE 0xCC000000
-#define IMX_CS2_BASE 0xD0000000
-#define IMX_CS3_BASE 0xD1000000
-#define IMX_CS4_BASE 0xD2000000
-#define IMX_CS5_BASE 0xD3000000
-
#endif /* _IMX21_REGS_H */
--
1.7.10.4
More information about the barebox
mailing list