[PATCH 1/2] Add bcm2835/Raspberry-Pi support

[Carlo Caione]

On 19/09/2012 12:08, Jan Lübbe wrote:
> Hi,
>
> On Wed, 2012-09-19 at 12:00 +0200, Carlo Caione wrote:
>> You need an sd card with a single partition fat32 with inside
>> bootcode.bin, loader.bin and start.elf (you can find the files here
>> https://github.com/raspberrypi/firmware/tree/master/boot)
>> Then just copy barebox.bin on the card and rename it kernel.img.
>
> Ok, I'll try that later today.
>
> What are your next plans? The USB or SD controllers?

SD controller definitely (after patching for Jean-Christophe suggestions).

Regards,

--
Carlo Caione