[PATCH v2] ARM i.MX6: query silicon revision

Steffen Trumtrar s.trumtrar at pengutronix.de
Mon Sep 3 03:10:28 EDT 2012


Read silicon revision from ???-register.
This is based on a7683867463481bfea84af4d60af832ddfb3da7f from u-boot.
The address 0x020c8260 is used and decoded. I haven't found that in my
datasheet, so I must trust the code to be correct.
At least on a SabreLite v1.0 I get the correct version though.

Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
---
 arch/arm/mach-imx/imx6.c |   34 +++++++++++++++++++++++++++++++++-
 1 file changed, 33 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-imx/imx6.c b/arch/arm/mach-imx/imx6.c
index b6067d7..fef0a00 100644
--- a/arch/arm/mach-imx/imx6.c
+++ b/arch/arm/mach-imx/imx6.c
@@ -19,7 +19,7 @@
 #include <common.h>
 #include <io.h>
 #include <sizes.h>
-#include <mach/imx6-regs.h>
+#include <mach/imx-regs.h>
 
 #include "gpio.h"
 
@@ -35,6 +35,38 @@ void *imx_gpio_base[] = {
 
 int imx_gpio_count = ARRAY_SIZE(imx_gpio_base) * 32;
 
+static u32 mx6_silicon_revision;
+static char *mx6_rev_string = "unknown";
+
+int imx_silicon_revision(void)
+{
+	return mx6_silicon_revision;
+}
+
+static int query_silicon_revision(void)
+{
+	void __iomem *anatop = (void *) MX6_ANATOP_BASE_ADDR;
+	u32 rev, reg;
+
+	reg = readl(anatop + 0x260);
+	rev = (reg & 0xff) + 0x10;
+	switch (rev) {
+	case 0x10:
+		mx6_silicon_revision = IMX_CHIP_REV_1_0;
+		mx6_rev_string = "1.0";
+		break;
+	case 0x11:
+		mx6_silicon_revision = IMX_CHIP_REV_1_1;
+		mx6_rev_string = "1.1";
+		break;
+	default:
+		mx6_silicon_revision = 0;
+	}
+
+	return 0;
+}
+core_initcall(query_silicon_revision);
+
 void imx6_init_lowlevel(void)
 {
 	void __iomem *aips1 = (void *)MX6_AIPS1_ON_BASE_ADDR;
-- 
1.7.10.4




More information about the barebox mailing list