[PATCH 3/3] miidev: fix 1G wrong detection

Jean-Christophe PLAGNIOL-VILLARD plagnioj at jcrosoft.com
Fri Sep 7 03:43:48 EDT 2012


On 08:44 Fri 07 Sep     , Sascha Hauer wrote:
> On Thu, Sep 06, 2012 at 09:39:31PM +0200, Eric Bénard wrote:
> > since 99e72c8bbdbdc690025a5868d831f1fe79ad56fc on an i.MX51 based board,
> > I get : "phy0: Link is up - 1000/Full". It seems miidev tries to probe
> > the PHY to early and gets 0x3ffff which leads to the wrong capabilities
> > setting.
> > 
> > Signed-off-by: Eric Bénard <eric at eukrea.com>
> > ---
> >  drivers/net/miidev.c |   33 +++++++++------------------------
> >  1 files changed, 9 insertions(+), 24 deletions(-)
> > 
> > diff --git a/drivers/net/miidev.c b/drivers/net/miidev.c
> > index 75b53e3..e0f9d67 100644
> > --- a/drivers/net/miidev.c
> > +++ b/drivers/net/miidev.c
> > @@ -131,6 +131,14 @@ int miidev_get_status(struct mii_device *mdev)
> >  
> >  	status = ret & BMSR_LSTATUS ? MIIDEV_STATUS_IS_UP : 0;
> >  
> > +	if (ret & BMSR_ESTATEN) {
> > +		ret = mii_read(mdev, mdev->address, MII_ESTATUS);
> > +		if (ret < 0)
> > +			goto err_out;
> > +		if (ret & (ESTATUS_1000_TFULL | ESTATUS_1000_THALF))
> > +			mdev->capabilities = MIIDEV_CAPABLE_1000M;
> > +	}
> > +
> >  	ret = mii_read(mdev, mdev->address, MII_BMCR);
> >  	if (ret < 0)
> >  		goto err_out;
> > @@ -239,27 +247,8 @@ static struct file_operations miidev_ops = {
> >  static int miidev_probe(struct device_d *dev)
> >  {
> >  	struct mii_device *mdev = dev->priv;
> > -	int val;
> > -	int caps = 0;
> >  
> > -	val = mii_read(mdev, mdev->address, MII_PHYSID1);
> > -	if (val < 0 || val == 0xffff)
> > -		goto err_out;
> > -	val = mii_read(mdev, mdev->address, MII_PHYSID2);
> > -	if (val < 0 || val == 0xffff)
> > -		goto err_out;
> 
> Is the above necessary? This was present before the patch which made the
> regression.
yes the previous patch made a regression

as it expect the mii to be ready at probe vs open before

Best Regards,
J.
> 
> Sascha
> 
> > -	val = mii_read(mdev, mdev->address, MII_BMSR);
> > -	if (val < 0)
> > -		goto err_out;
> > -	if (val & BMSR_ESTATEN) {
> > -		val = mii_read(mdev, mdev->address, MII_ESTATUS);
> > -		if (val < 0)
> > -			goto err_out;
> > -		if (val & (ESTATUS_1000_TFULL | ESTATUS_1000_THALF))
> > -			caps = MIIDEV_CAPABLE_1000M;
> > -	}
> > -
> > -	mdev->capabilities = caps;
> > +	mdev->capabilities = 0;
> >  	mdev->cdev.name = asprintf("phy%d", dev->id);
> >  	mdev->cdev.size = 64;
> >  	mdev->cdev.ops = &miidev_ops;
> > @@ -268,10 +257,6 @@ static int miidev_probe(struct device_d *dev)
> >  	devfs_create(&mdev->cdev);
> >  	list_add_tail(&mdev->list, &miidev_list);
> >  	return 0;
> > -
> > -err_out:
> > -	dev_err(dev, "cannot read PHY registers (addr %d)\n", mdev->address);
> > -	return -ENODEV;
> >  }
> >  
> >  static void miidev_remove(struct device_d *dev)
> > -- 
> > 1.7.7.6
> > 
> > 
> > _______________________________________________
> > barebox mailing list
> > barebox at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox



More information about the barebox mailing list