[PATCH 0/1 v7] net: introduce phylib
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Mon Sep 24 05:31:22 EDT 2012
HI,
v7:
- drop the duplicate platform_data for fec driver
as we need to update both with the same data (piss me off)
v6:
- probe phy at mdiobus_register
- reimplement the mdiobuss support
v5:
- drop edev in mii_device
v4:
- move phy_dev attachement to eth_device instead of mii_device
this will allow multiple phy_device per mii bus
- move phy cdev to phy_device
- add interface type support (so phy driver can configure themselves
if MII/RMII/RGMII etc...
- manage link status at framework level
- mx6 update to fixup the phy at device opening
v3:
- fix comment
- add phy_driver probe and remove
- renambe phydev.h to phy.h and phylib.c to phy.c as in linux
please pull
The following changes since commit 0b3c3e77945243c262f9ff1275479e6d8ea1d5c3:
net: catch error on eth_send (2012-09-16 20:39:07 +0800)
are available in the git repository at:
git://git.jcrosoft.org/barebox.git tags/net_phylib
for you to fetch changes up to aa3e78ab068ca81416d6150fc545b6c5e271dad2:
net: introduce phylib (2012-09-24 05:35:20 +0800)
----------------------------------------------------------------
net: check error and introduce phylib
Adapt phylib from linux
This will allow to have
- phy drivers
- to only connect the phy at then opening of the device
- if the phy is not ready or down fail on open
Same behaviour as in linux and will allow to share code and simplify porting.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (1):
net: introduce phylib
arch/arm/boards/freescale-mx6-arm2/board.c | 43 ++---
arch/arm/boards/freescale-mx6-sabrelite/board.c | 40 ++--
arch/arm/configs/phycard_a_l1_defconfig | 2 +-
arch/arm/configs/tx51stk5_defconfig | 2 +-
arch/ppc/boards/pcm030/pcm030.c | 4 +-
arch/ppc/mach-mpc5xxx/include/mach/fec.h | 14 --
drivers/net/Kconfig | 30 +--
drivers/net/Makefile | 2 +-
drivers/net/altera_tse.c | 48 +++--
drivers/net/altera_tse.h | 3 +-
drivers/net/at91_ether.c | 49 ++---
drivers/net/designware.c | 62 ++++---
drivers/net/dm9k.c | 50 +++--
drivers/net/ep93xx.c | 35 ++--
drivers/net/ep93xx.h | 2 +-
drivers/net/fec_imx.c | 89 +++++----
drivers/net/fec_imx.h | 6 +-
drivers/net/fec_mpc5200.c | 58 +++---
drivers/net/fec_mpc5200.h | 4 +-
drivers/net/gianfar.c | 61 +++---
drivers/net/gianfar.h | 2 +-
drivers/net/ks8851_mll.c | 36 ++--
drivers/net/macb.c | 79 ++++----
drivers/net/miidev.c | 316 -------------------------------
drivers/net/netx_eth.c | 26 +--
drivers/net/phy/Kconfig | 17 ++
drivers/net/phy/Makefile | 2 +
drivers/net/phy/generic.c | 36 ++++
drivers/net/phy/mdio_bus.c | 250 +++++++++++++++++++++++++
drivers/net/phy/phy.c | 568 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/smc91111.c | 47 ++---
drivers/net/smc911x.c | 37 ++--
drivers/net/usb/Kconfig | 4 +-
drivers/net/usb/asix.c | 29 ++-
drivers/net/usb/smsc95xx.c | 41 ++--
drivers/net/usb/usbnet.c | 11 +-
include/fec.h | 3 +
include/linux/ethtool.h | 114 ++++++++++++
include/linux/mii.h | 421 ++++++++++++++++++++++++++++++-----------
include/linux/phy.h | 266 ++++++++++++++++++++++++++
include/miidev.h | 51 +----
include/net.h | 4 +
include/usb/usbnet.h | 5 +-
net/eth.c | 8 +-
44 files changed, 2038 insertions(+), 939 deletions(-)
delete mode 100644 arch/ppc/mach-mpc5xxx/include/mach/fec.h
delete mode 100644 drivers/net/miidev.c
create mode 100644 drivers/net/phy/Kconfig
create mode 100644 drivers/net/phy/Makefile
create mode 100644 drivers/net/phy/generic.c
create mode 100644 drivers/net/phy/mdio_bus.c
create mode 100644 drivers/net/phy/phy.c
create mode 100644 include/linux/ethtool.h
create mode 100644 include/linux/phy.h
Best Regards,
J.
More information about the barebox
mailing list