November 2012 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Thu Nov 1 01:20:38 EDT 2012
Ending: Fri Nov 30 11:44:12 EST 2012
Messages: 500

• [PATCH v3 1/3] ARM: Add CLPS711X architecture   Alexander Shiyan
• [PATCH v3 1/3] ARM: Add CLPS711X architecture   Sascha Hauer
• [PATCH] net usb asix: Add missing line breaks in dev_* messages   Sascha Hauer
• [PATCH] panda and beagle update   Sascha Hauer
• [PATCH 1/6] ARM OMAP4: Turn puts into debug   Sascha Hauer
• [PATCH 2/6] ARM OMAP4 panda: switch to new environment   Sascha Hauer
• [PATCH 3/6] ARM OMAP4 panda xload: Enable MMU and Thumb2 support   Sascha Hauer
• [PATCH 4/6] ARM OMAP3 beagle: switch to new environment   Sascha Hauer
• [PATCH 5/6] ARM OMAP3 boards: Call omap3_core_init only from SRAM   Sascha Hauer
• [PATCH 6/6] ARM OMAP3: Put reset() into its own section   Sascha Hauer
• [PATCH 1/1] mtd: dataflash: fix spi_transfer init  
• [PATCH 0/2] m25p80: re-import it againt mtd_add_host   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] mtd: introduce mtd_block_isbad   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/4] i2c: add algo-bit support with gpio and versatile support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] i2c: adapter: register it's own device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] i2c: add i2c algo bit support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] i2c: add i2c-gpio support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] i2c: add versatile support   Jean-Christophe PLAGNIOL-VILLARD
• [For next PATCH 1/1] versatilepb: add i2c support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] fix devicetree alignment   Sascha Hauer
• [PATCH 1/2] bootm: Add a define for the additional devicetree size   Sascha Hauer
• [PATCH 2/2] bootm: Do not cross 1MiB sections for the devicetree   Sascha Hauer
• [PATCH 1/1] input: add qt1070 touch keyboard support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1 v2] input: add qt1070 touch keyboard support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] command: return 1 on unknown command   Sascha Hauer
• [PATCH 0/7] at91 add i2c-gpio suport   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] at91sam9x5: add i2c support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] at91rm9200: add i2c support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] at91sam9260/sam9g20: add i2c support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] at91sam9263: add i2c support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] at91sam9261/sam9g10: add i2c support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] at91sam9g45: add i2c support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] at91sam9x5ek: add i2c support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] at91sam9xek: fix mtd partition   Sascha Hauer
• [PATCH 0/8 v3] pm9g45/pm9253/pm9261: add 1-wire support   Sascha Hauer
• [PATCH 0/4] at91sam9x5ek: add 1-wire support and hardware detection support   Sascha Hauer
• [PATCH] iomux-imx35: add missing comma in pad definition   Sascha Hauer
• [PATCH] mount: add compatibility to old mount command   Sascha Hauer
• [PATCH 0/2] Y-Modem implementation change   Robert Jarzmik
• [PATCH 1/2] commands: change Y-Modem implementation   Robert Jarzmik
• [PATCH 2/2] commands: remove old Y-Modem implementation   Robert Jarzmik
• [PATCH 0/2] Y-Modem implementation change   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] Y-Modem implementation change   Antony Pavlov
• [PATCH 1/1 v2] at91sam9x5ek: add i2c support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] defenv-2: Make it simpler   Sascha Hauer
• [PATCH 1/3] defenv-2: remove initrd boot script   Sascha Hauer
• [PATCH 2/3] defenv-2: remove some helper scripts   Sascha Hauer
• [PATCH 3/3] defenv-2: bring back /env/config   Sascha Hauer
• [PATCH 0/2] Y-Modem implementation change   Antony Pavlov
• [PATCH 06/28] ARM i.MX boards: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 0/4] at91sam9x5ek: add spi and mci support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] Y-Modem implementation change   Sascha Hauer
• [PATCH 1/4] at91sam9x5: add spi support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] at91sam9x5ek: add spi support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] at91sam9x5: add mci support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] at91sam9x5ek: add mci support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/4 v2] at91sam9x5ek: add spi and mci support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] Y-Modem implementation change   Robert Jarzmik
• [PATCH 1/4] at91sam9x5: add spi support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] at91sam9x5ek: add spi support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] at91sam9x5: add mci support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] at91sam9x5ek: add mci support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] defenv-2 menu: when booting failed wait for key press   Sascha Hauer
• [PATCH v3 1/3] ARM: Add CLPS711X architecture   Alexander Shiyan
• [PATCH 1/4] i2c: adapter: register it's own device   Sascha Hauer
• [PATCH v3 1/3] ARM: Add CLPS711X architecture   Sascha Hauer
• [PATCH v3 1/3] ARM: Add CLPS711X architecture   Alexander Shiyan
• [PATCH v3 1/3] ARM: Add CLPS711X architecture   Sascha Hauer
• [PATCH 1/1] mtd: dataflash: fix spi_transfer init   Sascha Hauer
• [PATCH v3 1/3] ARM: Add CLPS711X architecture   Alexander Shiyan
• [PATCH v4 1/3] ARM: Add initial support for CLPS711X architecture   Alexander Shiyan
• [PATCH v4 2/3] ARM: clps711x: Add serial driver   Alexander Shiyan
• [PATCH v4 3/3] ARM: clps711x: Add generic board support (CLEP7212)   Alexander Shiyan
• [PATCH 1/4] i2c: adapter: register it's own device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/4 v2] i2c: add algo-bit support with gpio and versatile support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/7] at91 add i2c-gpio suport   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] i2c: adapter: register it's own device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] i2c: add i2c algo bit support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] i2c: add i2c-gpio support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] i2c: add versatile support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/4 v2] at91sam9x5ek: add spi and mci support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 1/3] ARM: Add initial support for CLPS711X architecture   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 1/3] ARM: Add initial support for CLPS711X architecture   Sascha Hauer
• [PATCH 0/4 v2] i2c: add algo-bit support with gpio and versatile support   Sascha Hauer
• [For next PATCH 1/1] versatilepb: add i2c support   Sascha Hauer
• [PATCH v4 1/3] ARM: Add initial support for CLPS711X architecture   Alexander Shiyan
• [PATCH 0/2] add spi command   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] spi: introduce spi_get_master   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] introduce spi command   Jean-Christophe PLAGNIOL-VILLARD
• Re: [PATCH 2/2] introduce spi command   Alexander Shiyan
• [PATCH 2/2] introduce spi command   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] add spi command   Sascha Hauer
• [PATCH 1/1 v2] input: add qt1070 touch keyboard support   Sascha Hauer
• [PATCH 0/7] at91 add i2c-gpio suport   Sascha Hauer
• [PATCH 0/7] at91 add i2c-gpio suport   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1 v2] input: add qt1070 touch keyboard support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] add spi command   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1 v3] input: add qt1070 touch keyboard support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1 v3] at91sam9x5ek: add i2c support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/4 v3] at91sam9x5ek: add spi and mci support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] at91sam9x5: add spi support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] at91sam9x5ek: add spi support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] at91sam9x5: add mci support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] at91sam9x5ek: add mci support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] eth: register device a pure device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2 v2] add bus device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] bus_for_each_device/bus_for_each_driver: add () to allow use &bus   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] bus: add bus device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/3] i2c fix + prepare for at24 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] i2c: algo-bit add missing acknak   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] i2c: introduce i2c_new_dummy   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] i2c: add id_table support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/3] i2c: add at24 eeprom support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] import log2 support from linux   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] add roundup and rounddown support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] eeprom: add at24 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] at91sam9x5ek: add at24c512 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] introduce spi command   Sascha Hauer
• [PATCH 0/2 v2] add spi command   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] spi: introduce spi_get_master   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] introduce spi command   Jean-Christophe PLAGNIOL-VILLARD
• Ramfs and NULL pointer   Robert Jarzmik
• [PATCH v2 1/2] commands: change Y-Modem implementation   Robert Jarzmik
• [PATCH v2 2/2] commands: remove old Y-Modem implementation   Robert Jarzmik
• [PATCH v2 1/2] commands: change Y-Modem implementation   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] atmel_spi: fix multiple instance support   Jean-Christophe PLAGNIOL-VILLARD
• Ramfs and NULL pointer   Robert Jarzmik
• [PATCH 1/1] at91rm9200ek: enable dt support   Jean-Christophe PLAGNIOL-VILLARD
• Ramfs and NULL pointer   Sascha Hauer
• Ramfs and NULL pointer   Robert Jarzmik
• [PATCH 0/2 v3] add spi command   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] spi: introduce spi_get_master   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] introduce spi command   Jean-Christophe PLAGNIOL-VILLARD
• TX53: Not Bootable from next tree   Christian Kapeller
• TX53: Not Bootable from next tree   Sascha Hauer
• TX53: Not Bootable from next tree   Christian Kapeller
• [PATCH v2 1/2] commands: change Y-Modem implementation   Robert Jarzmik
• [PATCH 0/2 v4] add spi command   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 1/2] commands: change Y-Modem implementation   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] spi: introduce spi_get_master   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] introduce spi command   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 1/2] commands: change Y-Modem implementation   Robert Jarzmik
• [PATCH v2 1/2] commands: change Y-Modem implementation   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 1/2] commands: change Y-Modem implementation   Robert Jarzmik
• [PATCH v2 1/2] commands: change Y-Modem implementation   Jean-Christophe PLAGNIOL-VILLARD
• TX53: Not Bootable from next tree   Peter Wippich
• [PATCH 0/8] atmtel: fix spi driver + rm9200   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/8] atmel_spi: use device id as bus num   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/8] atmel_spi: split transfert to atmel_spi_do_xfer   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/8] atmel_spi: after setup the cs need to be disable   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/8] atmel_spi: add sanity check in setup   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/8] atmel_spi: fix cs support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/8] atmel_spi: drop setup during transfer   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/8] atmel_spi: add cs change support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/8] at91rm9200: fix spi cs support   Jean-Christophe PLAGNIOL-VILLARD
• [RFC][PATCH] pcm043: usb support --not working--   Michael Burkey
• [PATCH v2 1/2] commands: change Y-Modem implementation   Robert Jarzmik
• [PATCH] mdiobus: unbreak phy_device_connect() "scan all PHY addresses" feature   Andreas Pretzsch
• TX53: Not Bootable from next tree   Sascha Hauer
• [PATCH] mdiobus: unbreak phy_device_connect() "scan all PHY addresses" feature   Sascha Hauer
• [PATCH v2 1/2] commands: change Y-Modem implementation   Antony Pavlov
• [PATCH] make new y-modem (PATCH v2) work on big-endian CPU   Antony Pavlov
• [PATCH] mdiobus: unbreak phy_device_connect(): honor masked out PHYs   Andreas Pretzsch
• [PATCH] net smc911x: add support for external PHY   Andreas Pretzsch
• [PATCH] make new y-modem (PATCH v2) work on big-endian CPU   Robert Jarzmik
• [PATCH] make new y-modem (PATCH v2) work on big-endian CPU   Antony Pavlov
• [PATCH] make new y-modem (PATCH v2) work on big-endian CPU   Antony Pavlov
• [PATCH] make new y-modem (PATCH v2) work on big-endian CPU   Robert Jarzmik
• [PATCH v3 1/2] commands: change Y-Modem implementation   Robert Jarzmik
• [PATCH v3 2/2] commands: remove old Y-Modem implementation   Robert Jarzmik
• [PATCH v3 1/2] commands: change Y-Modem implementation   Antony Pavlov
• defaultenv-2: how to update a flash partition?   Fabio Porcedda
• [PATCH] mdiobus: unbreak phy_device_connect(): honor masked out PHYs   Sascha Hauer
• [PATCH] net smc911x: add support for external PHY   Sascha Hauer
• [PATCH 0/2 v4] add spi command   Sascha Hauer
• [PATCH 1/1] at91rm9200ek: enable dt support   Sascha Hauer
• [PATCH 0/8] atmtel: fix spi driver + rm9200   Sascha Hauer
• [PATCH 0/3] i2c: add at24 eeprom support   Sascha Hauer
• [PATCH 0/3] i2c fix + prepare for at24 support   Sascha Hauer
• [PATCH 1/1] eth: register device a pure device   Sascha Hauer
• [PATCH 1/1] at91sam9x5ek: add at24c512 support   Sascha Hauer
• defaultenv-2: how to update a flash partition?   Sascha Hauer
• TX53: Not Bootable from next tree   Sascha Hauer
• [PATCH v3 1/2] commands: change Y-Modem implementation   Sascha Hauer
• [PATCH] omap3_spi: fix bus numbers according to omap3_add_spi[1-4]   Sascha Hauer
• [PATCH] ARM pbl: add generated file zbarebox.map to .gitignore   Fabio Porcedda
• TX53: Not Bootable from next tree   Peter Wippich
• TX53: Not Bootable from next tree   Christian Kapeller
• [PATCH] mci_spi: always compute command crc byte   Franck Jullien
• defaultenv-2: how to update a flash partition?   Fabio Porcedda
• [PATCH 2/8] atmel_spi: split transfert to atmel_spi_do_xfer   Thomas Petazzoni
• [PATCH 1/1] phylib: add fixup support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/4] mci-spi fix   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] mci_spi: always compute command crc byte   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] mci-core: spi fix op cond support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] mci_spi: add sanity check   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] mci_spi: add clock frequency change support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] at91sam9: add detection of low power sdram   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] usb-a9g20: add mmc spi support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] tny-a9g20: add mmc spi support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] phy: phy_update_status wait auto neg done when enabled   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] phy: phy_update_status wait auto neg done when enabled   Sascha Hauer
• defaultenv-2: how to update a flash partition?   Sascha Hauer
• [PATCH] replace barebox* in .gitignore with individual files   Sascha Hauer
• [PATCH] ARM pbl: add generated file zbarebox.map to .gitignore   Sascha Hauer
• [PATCH] mci_spi: always compute command crc byte   Sascha Hauer
• [PATCH 1/1] phy: phy_update_status wait auto neg done when enabled   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] phy: phy_update_status wait auto neg done when enabled   Sascha Hauer
• [PATCH 1/1] phy: phy_update_status wait auto neg done when enabled   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] phy: if the link partner just ack us wait the end of the autoneg   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] phy: if the link partner just ack us wait the end of the autoneg   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] nios2: use barebox_add_memory_bank in generic.c   Franck Jullien
• [PATCH 2/2] nios2: update generic_defconfig   Franck Jullien
• why eth0 not in /dev   zzs
• how to download a file to specified mem location using tftp   zzs
• how to download a file to specified mem location using tftp   Antony Pavlov
• how to download a file to specified mem location using tftp   Antony Pavlov
• how to download a file to specified mem location using tftp   zzs
• TX53-8030 Memory Speed   Günter Gebhardt
• how to download a file to specified mem location using tftp   zzs
• why eth0 not in /dev   Sascha Hauer
• how to download a file to specified mem location using tftp   Sascha Hauer
• TX53-8030 Memory Speed   Sascha Hauer
• [PATCH 1/2] nios2: use barebox_add_memory_bank in generic.c   Sascha Hauer
• [PATCH 1/1] phy: if the link partner just ack us wait the end of the autoneg   Sascha Hauer
• [PATCH 1/1] phy: if the link partner just ack us wait the end of the autoneg   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] phy: add phy_drivers_register   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] phy: add smsc phy driver support   Jean-Christophe PLAGNIOL-VILLARD
• [TX53: boot fixes 0/2] Make TX53 bootable again   Christian Kapeller
• [TX53: boot fixes 1/2] tx53: Fix unbootable TX53-8030.   Christian Kapeller
• [TX53: boot fixes 2/2] tx53: remove reset() when not doing lowlevel init.   Christian Kapeller
• [PATCH 0/2 v2] add bus device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/4 v3] at91sam9x5ek: add spi and mci support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] m25p80: re-import it againt mtd_add_host   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] mx53-loco: fix phy reset   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] imx53: implement imx53_add_kpp   Christian Kapeller
• [PATCH 1/1] mx53-loco: fix phy reset   Sascha Hauer
• [PATCH 2/2] phy: add smsc phy driver support   Sascha Hauer
• [TX53: boot fixes 0/2] Make TX53 bootable again   Sascha Hauer
• [PATCH 1/1] mx53-loco: fix phy reset   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] mx53-loco: fix phy reset   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] mx53 loco: enable smsc phy driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1 v2] phy: add smsc phy driver support   Jean-Christophe PLAGNIOL-VILLARD
• [TX53: boot fixes 0/2] Make TX53 bootable again   Christian Kapeller
• [PATCH 1/1] mci-core: fix debug Capacity cast   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] mx53 loco: enable smsc phy driver   Sascha Hauer
• [PATCH 1/1] mci-core: fix debug Capacity cast   Sascha Hauer
• [PATCH 1/1] mx53 loco: enable smsc phy driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] mx53 loco: enable smsc phy driver   Sascha Hauer
• [PATCH 1/1] phylib: split config start to connect   Jean-Christophe PLAGNIOL-VILLARD
• how easy to add extra config for NAND-less beagle?   Robert P. J. Day
• how easy to add extra config for NAND-less beagle?   Sascha Hauer
• [PATCH 1/1] at91rm9200ek: add spi support   Jean-Christophe PLAGNIOL-VILLARD
• how easy to add extra config for NAND-less beagle?   Robert P. J. Day
• [PATCH] replace barebox* in .gitignore with individual files   Michael Olbrich
• how easy to add extra config for NAND-less beagle?   Jean-Christophe PLAGNIOL-VILLARD
• how easy to add extra config for NAND-less beagle?   Sascha Hauer
• common.h dependence leak   Kevin Huanpeng Du
• pedantry alert -- what is the proper spelling of "barebox"?   Robert P. J. Day
• how easy to add extra config for NAND-less beagle?   Robert P. J. Day
• pedantry alert -- what is the proper spelling of "barebox"?   Sascha Hauer
• pedantry alert -- what is the proper spelling of "barebox"?   Robert P. J. Day
• v2012.11.0 - The late one   Sascha Hauer
• [PATCH 0/7] at91sam9 add watchdog support with keep alive   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] watchdog: add keep alive support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] watchdog: add at91sam9 watchdog support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] at91sam9260/9g20: add wathdog support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] at91sam9261/9g10: add wathdog support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] at91sam9263: add wathdog support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] at91sam9g45: add wathdog support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] at91sam9x5: add wathdog support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] at91sam9260ek: specify mach entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] phylib: export phy_id via param   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] phylib: introduction of forced 100Mbps   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] macb/ether: split flags for drivers and phylib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/7 v2] at91sam9 add watchdog support with keep alive   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] watchdog: add keep alive support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] watchdog: add at91sam9 watchdog support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] at91sam9260/9g20: add wathdog support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] at91sam9261/9g10: add wathdog support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] at91sam9263: add wathdog support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] at91sam9g45: add wathdog support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] at91sam9x5: add wathdog support   Jean-Christophe PLAGNIOL-VILLARD
• after "git pull", building for beagle complains about missing "lzop"   Robert P. J. Day
• after "git pull", building for beagle complains about missing "lzop"   Jean-Christophe PLAGNIOL-VILLARD
• after "git pull", building for beagle complains about missing "lzop"   Robert P. J. Day
• [PATCH 0/2] m25p80: re-import it againt mtd_add_host   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] led-gpio: add bicolor led support   Jean-Christophe PLAGNIOL-VILLARD
• are there still issues with building sandbox on x86_64?   Robert P. J. Day
• [PATCH] i.MX25 & 35 usb config bits : fix host power bit   Christoph Fritz
• [PATCH] bareboxenv.c: simple grammatical fix   Robert P. J. Day
• [PATCH] MIPS: main_entry.c: fix typo   Antony Pavlov
• ARM: pbl: short patches   Antony Pavlov
• [PATCH 1/3] ARM: pbl: remove zbarebox.map during 'make clean'   Antony Pavlov
• [PATCH 2/3] ARM: start-pbl.c: make errorfn() static   Antony Pavlov
• [PATCH 3/3] ARM: start-pbl.c: unificate path to lib/decompress_*.c   Antony Pavlov
• [RFC 0/3] MIPS: add pre-bootloader (pbl) image support   Antony Pavlov
• [RFC 1/3] MIPS: add pre-bootloader (pbl) image support   Antony Pavlov
• [RFC 2/3] MIPS: boot: realize _start in C   Antony Pavlov
• [RFC 3/3] MIPS: qemu-malta_defconfig: use pbl   Antony Pavlov
• [PATCH 0/7] phylib: fix + drivers   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] driver: introduce device_probe to manully probe a device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] phylib: fix generic phy driver probe   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] mdio_bus: fix match   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] phylib: export phy_id via param   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] phylib: introduction of forced 100Mbps   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] phylib: add fixup support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] phylib: add micrel support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] mach-imx: Comment typo fix, "enviroment" -> "environment"   Robert P. J. Day
• [PATCH] arm lib: Remove redundant boot usage info from boot[uz].c   Robert P. J. Day
• is there a standard for putting the name of a source file in the file?   Robert P. J. Day
• [PATCH 3/3] ARM: start-pbl.c: unificate path to lib/decompress_*.c   Antony Pavlov
• is there a standard for putting the name of a source file in the file?   Jean-Christophe PLAGNIOL-VILLARD
• is there a standard for putting the name of a source file in the file?   Robert P. J. Day
• shouldn't asm-generic/barebox.lds.h be arch-independent?   Robert P. J. Day
• shouldn't asm-generic/barebox.lds.h be arch-independent?   Antony Pavlov
• shouldn't asm-generic/barebox.lds.h be arch-independent?   Robert P. J. Day
• shouldn't asm-generic/barebox.lds.h be arch-independent?   Robert P. J. Day
• howto cp to flash   zzs
• are there still issues with building sandbox on x86_64?   Sascha Hauer
• howto cp to flash   Franck Jullien
• shouldn't asm-generic/barebox.lds.h be arch-independent?   Sascha Hauer
• howto cp to flash   Eric Bénard
• howto cp to flash   zzs
• are there still issues with building sandbox on x86_64?   Robert P. J. Day
• [PATCH] mach-imx: Comment typo fix, "enviroment" -> "environment"   Sascha Hauer
• [PATCH] arm lib: Remove redundant boot usage info from boot[uz].c   Sascha Hauer
• [PATCH] bareboxenv.c: simple grammatical fix   Sascha Hauer
• [PATCH] MIPS: main_entry.c: fix typo   Sascha Hauer
• [PATCH 1/1] at91sam9260ek: specify mach entry   Sascha Hauer
• [PATCH 2/7] watchdog: add at91sam9 watchdog support   Sascha Hauer
• [PATCH 1/7] watchdog: add keep alive support   Sascha Hauer
• is there a standard for putting the name of a source file in the file?   Sascha Hauer
• is there a standard for putting the name of a source file in the file?   Robert P. J. Day
• [PATCH 1/1] at91sam9260ek: specify mach entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] watchdog: add at91sam9 watchdog support   Jean-Christophe PLAGNIOL-VILLARD
• howto cp to flash   Sascha Hauer
• [PATCH 1/7] watchdog: add keep alive support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] i.MX25 & 35 usb config bits : fix host power bit   Sascha Hauer
• [PATCH 1/1] at91sam9260ek: specify mach entry   Sascha Hauer
• [PATCH 1/1] led-gpio: add bicolor led support   Sascha Hauer
• [PATCH 3/3] ARM: start-pbl.c: unificate path to lib/decompress_*.c   Sascha Hauer
• [PATCH] imx53: implement imx53_add_kpp   Sascha Hauer
• [PATCH 0/2 v2] add bus device   Sascha Hauer
• [PATCH 3/3] ARM: start-pbl.c: unificate path to lib/decompress_*.c   Antony Pavlov
• [PATCH 3/3] ARM: start-pbl.c: unificate path to lib/decompress_*.c   Sascha Hauer
• [PATCH 3/3] ARM: start-pbl.c: unificate path to lib/decompress_*.c   Antony Pavlov
• [PATCH] nand-bb: Fix remove of nand-bb device.   Juergen Kilb
• RFC: first patch for getting arch-specific stuff out of asm-generic/barebox.lds.h   Robert P. J. Day
• where is tftp mounting documented in the source code?   Robert P. J. Day
• [PATCH] mach-imx: Add/correct help info in mach-imx/Kconfig   Robert P. J. Day
• wrong cfi flash device id   zzs
• [PATCH] ARM pcm043: Fix macro name   Christian Hemp
• [PATCH 3/3] ARM: start-pbl.c: unificate path to lib/decompress_*.c   Sascha Hauer
• [PATCH] nand-bb: Fix remove of nand-bb device.   Sascha Hauer
• [RFC 2/3] MIPS: boot: realize _start in C   Sascha Hauer
• [RFC 1/3] MIPS: add pre-bootloader (pbl) image support   Sascha Hauer
• [PATCH] mach-imx: Add/correct help info in mach-imx/Kconfig   Sascha Hauer
• wrong cfi flash device id   Jean-Christophe PLAGNIOL-VILLARD
• where is tftp mounting documented in the source code?   Sascha Hauer
• wrong cfi flash device id   张忠山
• [PATCH] ARM pcm043: Fix macro name   Sascha Hauer
• [PATCH 0/7] phylib: fix + drivers   Sascha Hauer
• [PATCH 0/2] m25p80: re-import it againt mtd_add_host   Sascha Hauer
• where is tftp mounting documented in the source code?   Robert P. J. Day
• defaultenv-2: how to update a flash partition?   Fabio Porcedda
• [PATCH 0/2] m25p80: re-import it againt mtd_add_host   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] m25p80: re-import it againt mtd_add_host   Jean-Christophe PLAGNIOL-VILLARD
• Ramfs and NULL pointer   Robert Jarzmik
• Ramfs and NULL pointer   Robert Jarzmik
• [PATCH 1/5] pinctrl: at91: provide gpio names   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] pinctrl: at91 add deglitch, debounce, pull down and schmitt trigger mux option support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] ARM: at91sam9: add macb pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5] ARM: at91: fix usart/uart namimg in pinctrl   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] ARM: at91: dt: at91sam9260: split rts and cts pinctrl not   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] pinctrl: at91: provide gpio names   Jean-Christophe PLAGNIOL-VILLARD
• bmp splash memory corruption   Robert Jarzmik
• bmp splash memory corruption   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] splash: init struct allocated the stack to 0   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] bmp: specify we need to keep the data read from the file   Jean-Christophe PLAGNIOL-VILLARD
• where is tftp mounting documented in the source code?   Sascha Hauer
• [PATCH 2/2] bmp: specify we need to keep the data read from the file   Robert Jarzmik
• [PATCH 2/2] bmp: specify we need to keep the data read from the file   Sascha Hauer
• USB host Unrecoverable Error on AT91SAM9x5-ek   Richard Genoud
• USB host Unrecoverable Error on AT91SAM9x5-ek   Jean-Christophe PLAGNIOL-VILLARD
• USB host Unrecoverable Error on AT91SAM9x5-ek   Richard Genoud
• test   张忠山
• [PATCH] read cfi device id according the bus width   张忠山
• Can I use NAND_ATMEL on at91rm9200 board   张忠山
• Can I use NAND_ATMEL on at91rm9200 board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] read cfi device id according the bus width   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] read cfi device id according the bus width   张忠山
• [PATCH] read cfi device id according the bus width   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] read cfi device id according the bus width   张忠山
• [PATCH] read cfi device id according the bus width   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] read cfi device id according the bus width   张忠山
• [PATCH] read cfi device id according the bus width   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] read cfi device id according the bus width   张忠山
• NAND_ATMEL strange behavior on at91rm9200 board   张忠山
• NAND_ATMEL strange behavior on at91rm9200 board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/4] at91: some fixes   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] at91: fix timer rate   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] atmel_nand: fix pmecc timeout   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] at91: clock: check overclock for sam9260/9261/9263/9rl   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] Revert "mtd: atmel_nand: optimize read/write buffer functions"   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] at91: at91sam9n12 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] arm: at91: add at91sam9n12 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] at91: add at91sam9n12ek board support   Jean-Christophe PLAGNIOL-VILLARD
• [RFC 0/3] commands: md, mw: add '-x' option (swap bytes)   Antony Pavlov
• [RFC 1/3] add swab (swap bytes) option to memory_display()   Antony Pavlov
• [RFC 2/3] commands: md: add '-x' option (swap bytes)   Antony Pavlov
• [RFC 3/3] commands: mw: add '-x' option (swap bytes)   Antony Pavlov
• [PATCH 0/2] Some corrections on archosG9   Vicente Bergas
• [PATCH 1/2] uimage: fix misunderstanding in common/uimage.c   Vicente Bergas
• [PATCH 2/2] archosg9: improve configuration   Vicente Bergas
• [PATCH 4/4] Revert "mtd: atmel_nand: optimize read/write buffer functions"   张忠山
• [PATCH 1/2] uimage: fix misunderstanding in common/uimage.c   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] Revert "mtd: atmel_nand: optimize read/write buffer functions"   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] uimage: fix misunderstanding in common/uimage.c   vj
• [PATCH] xymodem.c: fix compiler warning   Antony Pavlov
• [RFC 1/3] MIPS: add pre-bootloader (pbl) image support   Antony Pavlov
• [RFC 2/3] MIPS: boot: realize _start in C   Antony Pavlov
• [PATCH] phylib: fix compiler warning   Antony Pavlov
• [PATCH] Cleanup Kconfig files   Alexander Shiyan
• [PATCH] xymodem.c: fix compiler warning   Robert Jarzmik
• [PATCH 4/4] Revert "mtd: atmel_nand: optimize read/write buffer functions"   张忠山
• [PATCH 4/4] Revert "mtd: atmel_nand: optimize read/write buffer functions"   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] Revert "mtd: atmel_nand: optimize read/write buffer functions"   张忠山
• what's the meaning of 'dyn'   张忠山
• [PATCH 0/4] at91: some fixes   Sascha Hauer
• [PATCH 0/2] at91: at91sam9n12 support   Sascha Hauer
• [PATCH] xymodem.c: fix compiler warning   Sascha Hauer
• [PATCH 0/2] Some corrections on archosG9   Sascha Hauer
• [RFC 1/3] MIPS: add pre-bootloader (pbl) image support   Sascha Hauer
• [PATCH] phylib: fix compiler warning   Sascha Hauer
• [PATCH] Cleanup Kconfig files   Sascha Hauer
• [RFC 0/3] commands: md, mw: add '-x' option (swap bytes)   Sascha Hauer
• commands: md, mw: add the '-x' option (swap bytes)   Antony Pavlov
• [PATCH 1/3] mem: add the swab (swap bytes) option to memory_display()   Antony Pavlov
• [PATCH 2/3] commands: md: add the '-x' option (swap bytes)   Antony Pavlov
• [PATCH 3/3] commands: mw: add the '-x' option (swap bytes)   Antony Pavlov
• [PATCH 1/3] debug_ll: Let architectures define PUTC_LL directly   Sascha Hauer
• [PATCH 2/3] debug_ll: Add some usage comments   Sascha Hauer
• [PATCH 3/3] i.MX debug_ll support   Sascha Hauer
• commands: md, mw: add the '-x' option (swap bytes)   Sascha Hauer
• Re[2]: [PATCH] Cleanup Kconfig files   Alexander Shiyan
• [PATCH 1/4] ARM i.MX bbu: Fix compiling with DEBUG enabled   Sascha Hauer
• [PATCH 2/4] ARM i.MX esdctl.h: Add double include protection   Sascha Hauer
• [PATCH 3/4] i.MX27 regs remove unnecessary include   Sascha Hauer
• [PATCH 4/4] serial i.MX: Make locally used variables static   Sascha Hauer
• [PATCH] i.MX sdram controller driver support   Sascha Hauer
• [PATCH 1/3] ARM i.MX: Add driver to get sdram base and size   Sascha Hauer
• [PATCH 2/3] ARM i.MX: register esdctl controller device   Sascha Hauer
• [PATCH 3/3] ARM i.MX boards: use esdctl code to detect sdram size   Sascha Hauer
• [PATCH] clk: check for invalid clocks   Sascha Hauer
• [PATCH 1/2] ARM i.MX bbu: Allow to overwrite app_dest   Sascha Hauer
• [PATCH 2/2] ARM i.MX bbu: Allow to have no DCD   Sascha Hauer
• [PATCH] Add Garz+Fricke Vincell board support   Sascha Hauer
• [PATCH 1/4] ARM i.MX5: move pll setup defines to header file   Sascha Hauer
• [PATCH 2/4] ARM i.MX: add esdctl-v4 support   Sascha Hauer
• [PATCH 3/4] ARM i.MX: Add Garz+Fricke Vincell Board support   Sascha Hauer
• [PATCH 4/4] ARM i.MX esdctl: Use defines from exisiting header file   Sascha Hauer
• [PATCH 3/4] ARM i.MX: Add Garz+Fricke Vincell Board support   Eric Bénard
• [PATCH] ARM i.MX53 loco: switch to new default env   Sascha Hauer
• [PATCH 3/4] ARM i.MX: Add Garz+Fricke Vincell Board support   Sascha Hauer
• [PATCH v2] ARM i.MX: Add Garz+Fricke Vincell Board support   Sascha Hauer
• [PATCH v2] ARM i.MX: Add Garz+Fricke Vincell Board support   Baruch Siach
• [PATCH v2] ARM i.MX: Add Garz+Fricke Vincell Board support   Sascha Hauer
• [PATCH] i2c: Add missing DEVICE_ID_DYNAMIC   Sascha Hauer
• [PATCH 1/4] barebox update: fix finding default handler   Sascha Hauer
• [PATCH 2/4] ARM i.MX bbu: Add i.MX6 MMC handler   Sascha Hauer
• [PATCH 3/4] ARM i.MX bbu internal: Add spi/i2c support   Sascha Hauer
• [PATCH 4/4] ARM i.MX6: save boot location   Sascha Hauer
• [PATCH 1/5] mci: Add STUFF_BITS and use it   Sascha Hauer
• [PATCH 2/5] mci: Fix capacity calculation for high capacity MMC cards   Sascha Hauer
• [PATCH 3/5] mci: Allow to specify device name   Sascha Hauer
• [PATCH 4/5] mci i.MX esdhc: Allow to specify devicename from platformdata   Sascha Hauer
• [PATCH 5/5] mci i.MX esdhc: turn error message into debug message   Sascha Hauer
• [PATCH 1/2] mfd stmpe: add index to devicename   Sascha Hauer
• [PATCH 2/2] mfd stmpe: fix test for features   Sascha Hauer
• [PATCH 1/2] mtd oob: do not register oob device for devices without oob   Sascha Hauer
• [PATCH 2/2] mtd core: call driver write function with complete buffer   Sascha Hauer
• [PATCH 1/2] rm: implement -r   Sascha Hauer
• [PATCH 2/2] loadenv: allow more fine grained environment loading   Sascha Hauer
• loading uImage from FAT partition   Belisko Marek
• [PATCH] MIPS: fix out-of-tree build   Antony Pavlov
• [PATCH 3/5] mci: Allow to specify device name   Jean-Christophe PLAGNIOL-VILLARD
• loading uImage from FAT partition   Sascha Hauer
• [PATCH 3/5] mci: Allow to specify device name   Sascha Hauer
• [PATCH 3/5] mci: Allow to specify device name   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] omap: gpmc: mark hex debug values as such   Jan Luebbe
• gunzip error when uncompress to buf   张忠山
• Howto known uncompressed length when uncompress_fd_to_buf   张忠山
• [Patch] ARM/MXS/i.MX28: distinguish POR and wake-up event correctly   Juergen Beisert
• gunzip error when uncompress to buf   Jean-Christophe PLAGNIOL-VILLARD
• gunzip error when uncompress to buf   张忠山
• How to read a file in UBIFS file system from barebox   Madhu koriginja
• How to read a file in UBIFS file system from barebox   Jean-Christophe PLAGNIOL-VILLARD
• How to read a file in UBIFS file system from barebox   Renaud Barbier
• How to read a file in UBIFS file system from barebox   Franck Jullien

Last message date: Fri Nov 30 11:44:12 EST 2012
Archived on: Fri Nov 30 11:44:16 EST 2012

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...