[PATCH 1/1] at91rm9200ek: enable dt support

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
 arch/arm/boards/at91rm9200ek/env/config |    2 ++
 arch/arm/configs/at91rm9200ek_defconfig |    5 +++++
 2 files changed, 7 insertions(+)

diff --git a/arch/arm/boards/at91rm9200ek/env/config b/arch/arm/boards/at91rm9200ek/env/config
index a3830cb..76c180b 100644
--- a/arch/arm/boards/at91rm9200ek/env/config
+++ b/arch/arm/boards/at91rm9200ek/env/config
@@ -15,6 +15,8 @@ global.dhcp.vendor_id=barebox-at91rm9200ek
 kernel_loc=nfs
 # can be either 'net', 'nor' or 'initrd'
 rootfs_loc=net
+# can be either 'nfs', 'tftp', or empty
+oftree_loc=nfs
 
 # can be either 'jffs2' or 'ubifs'
 rootfs_type=ubifs
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index 6a105c6..2bcade9 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -32,9 +32,14 @@ CONFIG_CMD_FLASH=y
 CONFIG_CMD_BOOTM_ZLIB=y
 CONFIG_CMD_BOOTM_BZLIB=y
 CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_VERBOSE=y
 CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_BOOTM_OFTREE=y
+CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
+# CONFIG_CMD_BOOTU is not set
 CONFIG_CMD_RESET=y
 CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
 CONFIG_CMD_TIMEOUT=y
 CONFIG_CMD_PARTITION=y
 CONFIG_CMD_GPIO=y
-- 
1.7.10.4