[PATCH 1/1] phy: phy_update_status wait auto neg done when enabled

[Sascha Hauer]

On Wed, Nov 14, 2012 at 10:34:58AM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 09:05 Wed 14 Nov     , Sascha Hauer wrote:
> > On Tue, Nov 13, 2012 at 10:14:05PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > >  
> > >  int phy_update_status(struct phy_device *dev)
> > >  {
> > > @@ -35,11 +54,18 @@ int phy_update_status(struct phy_device *dev)
> > >  	struct eth_device *edev = dev->attached_dev;
> > >  	int ret;
> > >  	int oldspeed = dev->speed, oldduplex = dev->duplex;
> > > +	int old_link = dev->link;
> > >  
> > >  	ret = drv->read_status(dev);
> > >  	if (ret)
> > >  		return ret;
> > >  
> > > +	if (dev->link && !old_link) {
> > > +		ret = phy_wait_aneg_read_status(dev, drv);
> > > +		if (ret)
> > > +			return ret;
> > > +	}
> > 
> > This does not help. dev->link is false after reset, so we never get into
> > phy_wait_aneg_read_status() which waits for a link.
> read_status update the dev->link as we call update_link
> 
> if !dev->link means no cable detected

How should the phy detect the cable if we do not wait for it being
detected?

Here's what I get from my board:

> barebox at Freescale i.MX53 LOCO:/ dhcp 
> r 0x0000 0x0001 0x7809

BMSR_ANEGCOMPLETE (1<<5) not set, this means autonegotiation is not complete

> r 0x0000 0x0004 0x01e1
> r 0x0000 0x0000 0x3000
> r 0x0000 0x0001 0x7809

Still not complete,

> r 0x0000 0x0001 0x7809
> r 0x0000 0x0005 0x0001
> r 0x0000 0x0004 0x01e1
> dhcp failed: Network is down

but we do not wait for it, so network down

> dhcp: Network is down
> barebox at Freescale i.MX53 LOCO:/ dhcp 
> r 0x0000 0x0001 0x782d

Next try, a few seconds later. BMSR_ANEGCOMPLETE is set, autonegotiation is complete,
BMSR_LSTATUS showd that link status is up.

> r 0x0000 0x0001 0x782d
> r 0x0000 0x0005 0x45e1
> r 0x0000 0x0004 0x01e1
> 100Mbps full duplex link detected

And it works.

I do not believe that this behaviour is specific to the special phy on
this board.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |