[PATCH 1/1] mx53-loco: fix phy reset

[Sascha Hauer]

On Thu, Nov 15, 2012 at 11:41:04AM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> the phy reset neet to be done before the fec driver is registered
> as we accesst the phy at the fec probe time

I spotted that aswell in the meantime. Applied, thanks

Sascha

> 
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> ---
>  arch/arm/boards/freescale-mx53-loco/board.c |    3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boards/freescale-mx53-loco/board.c b/arch/arm/boards/freescale-mx53-loco/board.c
> index 45c05c2..216d26a 100644
> --- a/arch/arm/boards/freescale-mx53-loco/board.c
> +++ b/arch/arm/boards/freescale-mx53-loco/board.c
> @@ -187,6 +187,7 @@ static int loco_devices_init(void)
>  {
>  
>  	imx53_iim_register_fec_ethaddr();
> +	loco_fec_reset();
>  	imx53_add_fec(&fec_info);
>  	imx53_add_mmc0(&loco_sd1_data);
>  	imx53_add_mmc2(&loco_sd3_data);
> @@ -196,8 +197,6 @@ static int loco_devices_init(void)
>  	if (IS_ENABLED(CONFIG_USB_EHCI))
>  		loco_ehci_init();
>  
> -	loco_fec_reset();
> -
>  	set_silicon_rev(imx_silicon_revision());
>  
>  	armlinux_set_bootparams((void *)0x70000100);
> -- 
> 1.7.10.4
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |