[PATCH 4/5] ARM: at91: fix usart/uart namimg in pinctrl
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Tue Nov 20 16:26:28 EST 2012
USART are the full pin uart
DBGU the debug Unit
UART the two pin uart
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
arch/arm/boot/dts/at91sam9260.dtsi | 58 +++++++++++++--------------
arch/arm/boot/dts/at91sam9263.dtsi | 24 +++++------
arch/arm/boot/dts/at91sam9263ek.dts | 2 +-
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 10 ++---
arch/arm/boot/dts/at91sam9g45.dtsi | 30 +++++++-------
arch/arm/boot/dts/at91sam9m10g45ek.dts | 2 +-
arch/arm/boot/dts/at91sam9n12.dtsi | 38 +++++++++---------
arch/arm/boot/dts/at91sam9x5.dtsi | 36 ++++++++---------
8 files changed, 100 insertions(+), 100 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 36f55e3..40bf329 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -21,8 +21,8 @@
serial2 = &usart1;
serial3 = &usart2;
serial4 = &usart3;
- serial5 = &usart4;
- serial6 = &usart5;
+ serial5 = &uart0;
+ serial6 = &uart1;
gpio0 = &pioA;
gpio1 = &pioB;
gpio2 = &pioC;
@@ -120,88 +120,88 @@
};
};
- uart0 {
- pinctrl_uart0: uart0-0 {
+ usart0 {
+ pinctrl_usart0: usart0-0 {
atmel,pins =
<1 4 0x1 0x0 /* PB4 periph A */
1 5 0x1 0x0>; /* PB5 periph A */
};
- pinctrl_uart0_rts_cts: uart0_rts_cts-0 {
+ pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
atmel,pins =
<1 26 0x1 0x0 /* PB26 periph A */
1 27 0x1 0x0>; /* PB27 periph A */
};
- pinctrl_uart0_dtr_dsr: uart0_dtr_dsr-0 {
+ pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
atmel,pins =
<1 24 0x1 0x0 /* PB24 periph A */
1 22 0x1 0x0>; /* PB22 periph A */
};
- pinctrl_uart0_dcd: uart0_dcd-0 {
+ pinctrl_usart0_dcd: usart0_dcd-0 {
atmel,pins =
<1 23 0x1 0x0>; /* PB23 periph A */
};
- pinctrl_uart0_ri: uart0_ri-0 {
+ pinctrl_usart0_ri: usart0_ri-0 {
atmel,pins =
<1 25 0x1 0x0>; /* PB25 periph A */
};
};
- uart1 {
- pinctrl_uart1: uart1-0 {
+ usart1 {
+ pinctrl_usart1: usart1-0 {
atmel,pins =
<2 6 0x1 0x1 /* PB6 periph A with pullup */
2 7 0x1 0x0>; /* PB7 periph A */
};
- pinctrl_uart1_rts_cts: uart1_rts_cts-0 {
+ pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
atmel,pins =
<1 28 0x1 0x0 /* PB28 periph A */
1 29 0x1 0x0>; /* PB29 periph A */
};
};
- uart2 {
- pinctrl_uart2: uart2-0 {
+ usart2 {
+ pinctrl_usart2: usart2-0 {
atmel,pins =
<1 8 0x1 0x1 /* PB8 periph A with pullup */
1 9 0x1 0x0>; /* PB9 periph A */
};
- pinctrl_uart2_rts_cts: uart2_rts_cts-0 {
+ pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
atmel,pins =
<0 4 0x1 0x0 /* PA4 periph A */
0 5 0x1 0x0>; /* PA5 periph A */
};
};
- uart3 {
- pinctrl_uart3: uart3-0 {
+ usart3 {
+ pinctrl_usart3: usart3-0 {
atmel,pins =
<2 10 0x1 0x1 /* PB10 periph A with pullup */
2 11 0x1 0x0>; /* PB11 periph A */
};
- pinctrl_uart3_rts_cts: uart3_rts_cts-0 {
+ pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
atmel,pins =
<3 8 0x2 0x0 /* PB8 periph B */
3 10 0x2 0x0>; /* PB10 periph B */
};
};
- uart4 {
- pinctrl_uart4: uart4-0 {
+ uart0 {
+ pinctrl_uart0: uart0-0 {
atmel,pins =
<0 31 0x2 0x1 /* PA31 periph B with pullup */
0 30 0x2 0x0>; /* PA30 periph B */
};
};
- uart5 {
- pinctrl_uart5: uart5-0 {
+ uart1 {
+ pinctrl_uart1: uart1-0 {
atmel,pins =
<2 12 0x1 0x1 /* PB12 periph A with pullup */
2 13 0x1 0x0>; /* PB13 periph A */
@@ -303,7 +303,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
+ pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
};
@@ -314,7 +314,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
+ pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
};
@@ -325,7 +325,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
+ pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
};
@@ -336,29 +336,29 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
+ pinctrl-0 = <&pinctrl_usart3>;
status = "disabled";
};
- usart4: serial at fffd4000 {
+ uart0: serial at fffd4000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffd4000 0x200>;
interrupts = <24 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart4>;
+ pinctrl-0 = <&pinctrl_uart0>;
status = "disabled";
};
- usart5: serial at fffd8000 {
+ uart1: serial at fffd8000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffd8000 0x200>;
interrupts = <25 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart5>;
+ pinctrl-0 = <&pinctrl_uart1>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 148b89a..cf4b59f 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -113,42 +113,42 @@
};
};
- uart0 {
- pinctrl_uart0: uart0-0 {
+ usart0 {
+ pinctrl_usart0: usart0-0 {
atmel,pins =
<0 26 0x1 0x1 /* PA26 periph A with pullup */
0 27 0x1 0x0>; /* PA27 periph A */
};
- pinctrl_uart0_rts_cts: uart0_rts_cts-0 {
+ pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
atmel,pins =
<0 28 0x1 0x0 /* PA28 periph A */
0 29 0x1 0x0>; /* PA29 periph A */
};
};
- uart1 {
- pinctrl_uart1: uart1-0 {
+ usart1 {
+ pinctrl_usart1: usart1-0 {
atmel,pins =
<3 0 0x1 0x1 /* PD0 periph A with pullup */
3 1 0x1 0x0>; /* PD1 periph A */
};
- pinctrl_uart1_rts_cts: uart1_rts_cts-0 {
+ pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
atmel,pins =
<3 7 0x2 0x0 /* PD7 periph B */
3 8 0x2 0x0>; /* PD8 periph B */
};
};
- uart2 {
- pinctrl_uart2: uart2-0 {
+ usart2 {
+ pinctrl_usart2: usart2-0 {
atmel,pins =
<3 2 0x1 0x1 /* PD2 periph A with pullup */
3 3 0x1 0x0>; /* PD3 periph A */
};
- pinctrl_uart2_rts_cts: uart2_rts_cts-0 {
+ pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
atmel,pins =
<3 5 0x2 0x0 /* PD5 periph B */
4 6 0x2 0x0>; /* PD6 periph B */
@@ -258,7 +258,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
+ pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
};
@@ -269,7 +269,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
+ pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
};
@@ -280,7 +280,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
+ pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 7cfe9d5..3434373 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -38,7 +38,7 @@
};
usart0: serial at fff8c000 {
- pinctrl-0 = <&pinctrl_uart0 &pinctrl_uart0_rts_cts>;
+ pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index e33ab0a..04f048f 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -36,11 +36,11 @@
usart0: serial at fffb0000 {
pinctrl-0 =
- <&pinctrl_uart0
- &pinctrl_uart0_rts_cts
- &pinctrl_uart0_dtr_dsr
- &pinctrl_uart0_dcd
- &pinctrl_uart0_ri>;
+ <&pinctrl_usart0
+ &pinctrl_usart0_rts_cts
+ &pinctrl_usart0_dtr_dsr
+ &pinctrl_usart0_dcd
+ &pinctrl_usart0_ri>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 0ad84b6..56ce896 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -132,14 +132,14 @@
};
};
- uart0 {
- pinctrl_uart0: uart0-0 {
+ usart0 {
+ pinctrl_usart0: usart0-0 {
atmel,pins =
<1 19 0x1 0x1 /* PB19 periph A with pullup */
1 18 0x1 0x0>; /* PB18 periph A */
};
- pinctrl_uart0_rts_cts: uart0_rts_cts-0 {
+ pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
atmel,pins =
<1 17 0x2 0x0 /* PB17 periph B */
1 15 0x2 0x0>; /* PB15 periph B */
@@ -147,41 +147,41 @@
};
uart1 {
- pinctrl_uart1: uart1-0 {
+ pinctrl_usart1: usart1-0 {
atmel,pins =
<1 4 0x1 0x1 /* PB4 periph A with pullup */
1 5 0x1 0x0>; /* PB5 periph A */
};
- pinctrl_uart1_rts_cts: uart1_rts_cts-0 {
+ pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
atmel,pins =
<3 16 0x1 0x0 /* PD16 periph A */
3 17 0x1 0x0>; /* PD17 periph A */
};
};
- uart2 {
- pinctrl_uart2: uart2-0 {
+ usart2 {
+ pinctrl_usart2: usart2-0 {
atmel,pins =
<1 6 0x1 0x1 /* PB6 periph A with pullup */
1 7 0x1 0x0>; /* PB7 periph A */
};
- pinctrl_uart2_rts_cts: uart2_rts_cts-0 {
+ pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
atmel,pins =
<2 9 0x2 0x0 /* PC9 periph B */
2 11 0x2 0x0>; /* PC11 periph B */
};
};
- uart3 {
- pinctrl_uart3: uart3-0 {
+ usart3 {
+ pinctrl_usart3: usart3-0 {
atmel,pins =
<1 8 0x1 0x1 /* PB9 periph A with pullup */
1 9 0x1 0x0>; /* PB8 periph A */
};
- pinctrl_uart3_rts_cts: uart3_rts_cts-0 {
+ pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
atmel,pins =
<0 23 0x2 0x0 /* PA23 periph B */
0 24 0x2 0x0>; /* PA24 periph B */
@@ -291,7 +291,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
+ pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
};
@@ -302,7 +302,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
+ pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
};
@@ -313,7 +313,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
+ pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
};
@@ -324,7 +324,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
+ pinctrl-0 = <&pinctrl_usart3>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 6aa28b9..0d9674b 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -39,7 +39,7 @@
};
usart1: serial at fff90000 {
- pinctrl-0 = <&pinctrl_uart0 &pinctrl_uart1_rts_cts>;
+ pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 7b644c5..10547bc 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -125,66 +125,66 @@
};
};
- uart0 {
- pinctrl_uart0: uart0-0 {
+ usart0 {
+ pinctrl_usart0: usart0-0 {
atmel,pins =
<0 1 0x1 0x1 /* PA1 periph A with pullup */
0 0 0x1 0x0>; /* PA0 periph A */
};
- pinctrl_uart0_rts_cts: uart0_rts_cts-0 {
+ pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
atmel,pins =
<0 2 0x1 0x0 /* PA2 periph A */
0 3 0x1 0x0>; /* PA3 periph A */
};
};
- uart1 {
- pinctrl_uart1: uart1-0 {
+ usart1 {
+ pinctrl_usart1: usart1-0 {
atmel,pins =
<0 6 0x1 0x1 /* PA6 periph A with pullup */
0 5 0x1 0x0>; /* PA5 periph A */
};
};
- uart2 {
- pinctrl_uart2: uart2-0 {
+ usart2 {
+ pinctrl_usart2: usart2-0 {
atmel,pins =
<0 8 0x1 0x1 /* PA8 periph A with pullup */
0 7 0x1 0x0>; /* PA7 periph A */
};
- pinctrl_uart2_rts_cts: uart2_rts_cts-0 {
+ pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
atmel,pins =
<1 0 0x2 0x0 /* PB0 periph B */
1 1 0x2 0x0>; /* PB1 periph B */
};
};
- uart3 {
- pinctrl_uart3: uart3-0 {
+ usart3 {
+ pinctrl_usart3: usart3-0 {
atmel,pins =
<2 23 0x2 0x1 /* PC23 periph B with pullup */
2 22 0x2 0x0>; /* PC22 periph B */
};
- pinctrl_uart3_rts_cts: uart3_rts_cts-0 {
+ pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
atmel,pins =
<2 24 0x2 0x0 /* PC24 periph B */
2 25 0x2 0x0>; /* PC25 periph B */
};
};
- usart0 {
- pinctrl_usart0: usart0-0 {
+ uart0 {
+ pinctrl_uart0: uart0-0 {
atmel,pins =
<2 9 0x3 0x1 /* PC9 periph C with pullup */
2 8 0x3 0x0>; /* PC8 periph C */
};
};
- usart1 {
- pinctrl_usart1: usart1-0 {
+ uart1 {
+ pinctrl_uart1: uart1-0 {
atmel,pins =
<2 16 0x3 0x1 /* PC17 periph C with pullup */
2 17 0x3 0x0>; /* PC16 periph C */
@@ -256,7 +256,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
+ pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
};
@@ -267,7 +267,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
+ pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
};
@@ -278,7 +278,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
+ pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
};
@@ -289,7 +289,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
+ pinctrl-0 = <&pinctrl_usart3>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 9fd7159..9dac006 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -126,36 +126,36 @@
};
};
- uart0 {
- pinctrl_uart0: uart0-0 {
+ usart0 {
+ pinctrl_usart0: usart0-0 {
atmel,pins =
<0 0 0x1 0x1 /* PA0 periph A with pullup */
0 1 0x1 0x0>; /* PA1 periph A */
};
- pinctrl_uart0_rts_cts: uart0_rts_cts-0 {
+ pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
atmel,pins =
<0 2 0x1 0x0 /* PA2 periph A */
0 3 0x1 0x0>; /* PA3 periph A */
};
};
- uart1 {
- pinctrl_uart1: uart1-0 {
+ usart1 {
+ pinctrl_usart1: usart1-0 {
atmel,pins =
<0 5 0x1 0x1 /* PA5 periph A with pullup */
0 6 0x1 0x0>; /* PA6 periph A */
};
- pinctrl_uart1_rts_cts: uart1_rts_cts-0 {
+ pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
atmel,pins =
<3 27 0x3 0x0 /* PC27 periph C */
3 28 0x3 0x0>; /* PC28 periph C */
};
};
- uart2 {
- pinctrl_uart2: uart2-0 {
+ usart2 {
+ pinctrl_usart2: usart2-0 {
atmel,pins =
<0 7 0x1 0x1 /* PA7 periph A with pullup */
0 8 0x1 0x0>; /* PA8 periph A */
@@ -168,30 +168,30 @@
};
};
- uart3 {
- pinctrl_uart3: uart3-0 {
+ usart3 {
+ pinctrl_uart3: usart3-0 {
atmel,pins =
<3 23 0x2 0x1 /* PC22 periph B with pullup */
3 23 0x2 0x0>; /* PC23 periph B */
};
- pinctrl_uart3_rts_cts: uart3_rts_cts-0 {
+ pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
atmel,pins =
<3 24 0x2 0x0 /* PC24 periph B */
3 25 0x2 0x0>; /* PC25 periph B */
};
};
- usart0 {
- pinctrl_usart0: usart0-0 {
+ uart0 {
+ pinctrl_uart0: uart0-0 {
atmel,pins =
<3 8 0x3 0x0 /* PC8 periph C */
3 9 0x3 0x1>; /* PC9 periph C with pullup */
};
};
- usart1 {
- pinctrl_usart1: usart1-0 {
+ uart1 {
+ pinctrl_uart1: uart1-0 {
atmel,pins =
<3 16 0x3 0x0 /* PC16 periph C */
3 17 0x3 0x1>; /* PC17 periph C with pullup */
@@ -293,7 +293,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
+ pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
};
@@ -304,7 +304,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
+ pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
};
@@ -315,7 +315,7 @@
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
+ pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
};
--
1.7.10.4
More information about the barebox
mailing list