[PATCH v4 2/3] ARM: clps711x: Add serial driver
Alexander Shiyan
shc_work at mail.ru
Fri Nov 2 05:17:15 EDT 2012
This patch adds a simple serial driver for CLPS711X architecture.
Signed-off-by: Alexander Shiyan <shc_work at mail.ru>
---
arch/arm/mach-clps711x/devices.c | 60 ++++++++++
arch/arm/mach-clps711x/include/mach/devices.h | 1 +
drivers/serial/Kconfig | 5 +
drivers/serial/Makefile | 1 +
drivers/serial/serial_clps711x.c | 157 +++++++++++++++++++++++++
5 files changed, 224 insertions(+), 0 deletions(-)
create mode 100644 drivers/serial/serial_clps711x.c
diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c
index c5fcbf2..08f27d2 100644
--- a/arch/arm/mach-clps711x/devices.c
+++ b/arch/arm/mach-clps711x/devices.c
@@ -35,3 +35,63 @@ void clps711x_setup_memcfg(int bank, u32 val)
break;
}
}
+
+static struct resource uart0_resources[] = {
+ {
+ .start = UBRLCR1,
+ .end = UBRLCR1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = SYSCON1,
+ .end = SYSCON1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = SYSFLG1,
+ .end = SYSFLG1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = UARTDR1,
+ .end = UARTDR1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource uart1_resources[] = {
+ {
+ .start = UBRLCR2,
+ .end = UBRLCR2,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = SYSCON2,
+ .end = SYSCON2,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = SYSFLG2,
+ .end = SYSFLG2,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = UARTDR2,
+ .end = UARTDR2,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+void clps711x_add_uart(unsigned int id)
+{
+ switch (id) {
+ case 0:
+ add_generic_device_res("clps711x_serial", 0, uart0_resources,
+ ARRAY_SIZE(uart0_resources), NULL);
+ break;
+ case 1:
+ add_generic_device_res("clps711x_serial", 1, uart1_resources,
+ ARRAY_SIZE(uart1_resources), NULL);
+ break;
+ }
+}
diff --git a/arch/arm/mach-clps711x/include/mach/devices.h b/arch/arm/mach-clps711x/include/mach/devices.h
index 7e5eaf9..18a251a 100644
--- a/arch/arm/mach-clps711x/include/mach/devices.h
+++ b/arch/arm/mach-clps711x/include/mach/devices.h
@@ -2,5 +2,6 @@
#define __MACH_DEVICES_H
void clps711x_setup_memcfg(int bank, u32 val);
+void clps711x_add_uart(unsigned int id);
#endif
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 7eb96ed..02bc8bf 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -43,6 +43,11 @@ config DRIVER_SERIAL_BLACKFIN
default y
bool "Blackfin serial driver"
+config DRIVER_SERIAL_CLPS711X
+ depends on ARCH_CLPS711X
+ default y
+ bool "CLPS711X serial driver"
+
config DRIVER_SERIAL_ALTERA
depends on NIOS2
default y
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index e2d56b9..e6f1e22 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_DRIVER_SERIAL_NETX) += serial_netx.o
obj-$(CONFIG_DRIVER_SERIAL_LINUX_CONSOLE) += linux_console.o
obj-$(CONFIG_DRIVER_SERIAL_MPC5XXX) += serial_mpc5xxx.o
obj-$(CONFIG_DRIVER_SERIAL_BLACKFIN) += serial_blackfin.o
+obj-$(CONFIG_DRIVER_SERIAL_CLPS711X) += serial_clps711x.o
obj-$(CONFIG_DRIVER_SERIAL_NS16550) += serial_ns16550.o
obj-$(CONFIG_DRIVER_SERIAL_PL010) += serial_pl010.o
obj-$(CONFIG_DRIVER_SERIAL_S3C) += serial_s3c.o
diff --git a/drivers/serial/serial_clps711x.c b/drivers/serial/serial_clps711x.c
new file mode 100644
index 0000000..21d0b55
--- /dev/null
+++ b/drivers/serial/serial_clps711x.c
@@ -0,0 +1,157 @@
+/*
+ * Simple CLPS711X serial driver
+ *
+ * (C) Copyright 2012 Alexander Shiyan <shc_work at mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <init.h>
+#include <io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <mach/clps711x.h>
+
+struct clps711x_uart {
+ void __iomem *UBRLCR;
+ void __iomem *SYSCON;
+ void __iomem *SYSFLG;
+ void __iomem *UARTDR;
+ struct clk *uart_clk;
+ struct console_device cdev;
+};
+
+static int clps711x_setbaudrate(struct console_device *cdev, int baudrate)
+{
+ struct clps711x_uart *s = cdev->dev->priv;
+ int divisor;
+ u32 tmp;
+
+ divisor = (clk_get_rate(s->uart_clk) / 16) / baudrate;
+
+ tmp = readl(s->UBRLCR) & ~UBRLCR_BAUD_MASK;
+ tmp |= divisor - 1;
+ writel(tmp, s->UBRLCR);
+
+ return 0;
+}
+
+static void clps711x_init_port(struct console_device *cdev)
+{
+ struct clps711x_uart *s = cdev->dev->priv;
+ u32 tmp;
+
+ /* Disable the UART */
+ writel(readl(s->SYSCON) & ~SYSCON_UARTEN, s->SYSCON);
+
+ /* Setup Line Control Register */
+ tmp = readl(s->UBRLCR) & UBRLCR_BAUD_MASK;
+ tmp |= UBRLCR_FIFOEN | UBRLCR_WRDLEN8; /* FIFO on, 8N1 mode */
+ writel(tmp, s->UBRLCR);
+
+ /* Set default baudrate on initialization */
+ clps711x_setbaudrate(cdev, CONFIG_BAUDRATE);
+
+ /* Enable the UART */
+ writel(readl(s->SYSCON) | SYSCON_UARTEN, s->SYSCON);
+}
+
+static void clps711x_putc(struct console_device *cdev, char c)
+{
+ struct clps711x_uart *s = cdev->dev->priv;
+
+ /* Wait until there is space in the FIFO */
+ while (readl(s->SYSFLG) & SYSFLG_UTXFF)
+ barrier();
+
+ /* Send the character */
+ writew(c, s->UARTDR);
+}
+
+static int clps711x_getc(struct console_device *cdev)
+{
+ struct clps711x_uart *s = cdev->dev->priv;
+ u16 data;
+
+ /* Wait until there is data in the FIFO */
+ while (readl(s->SYSFLG) & SYSFLG_URXFE)
+ barrier();
+
+ data = readw(s->UARTDR);
+
+ /* Check for an error flag */
+ if (data & (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR))
+ return -1;
+
+ return (int)data;
+}
+
+static int clps711x_tstc(struct console_device *cdev)
+{
+ struct clps711x_uart *s = cdev->dev->priv;
+
+ return !(readl(s->SYSFLG) & SYSFLG_URXFE);
+}
+
+static void clps711x_flush(struct console_device *cdev)
+{
+ struct clps711x_uart *s = cdev->dev->priv;
+
+ while (readl(s->SYSFLG) & SYSFLG_UBUSY)
+ barrier();
+}
+
+static int clps711x_probe(struct device_d *dev)
+{
+ struct clps711x_uart *s;
+
+ BUG_ON(dev->num_resources != 4);
+
+ s = xzalloc(sizeof(struct clps711x_uart));
+ s->uart_clk = clk_get(dev, NULL);
+ BUG_ON(IS_ERR(s->uart_clk));
+
+ s->UBRLCR = dev_get_mem_region(dev, 0);
+ s->SYSCON = dev_get_mem_region(dev, 1);
+ s->SYSFLG = dev_get_mem_region(dev, 2);
+ s->UARTDR = dev_get_mem_region(dev, 3);
+
+ dev->priv = s;
+ s->cdev.dev = dev;
+ s->cdev.f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR;
+ s->cdev.tstc = clps711x_tstc;
+ s->cdev.putc = clps711x_putc;
+ s->cdev.getc = clps711x_getc;
+ s->cdev.flush = clps711x_flush;
+ s->cdev.setbrg = clps711x_setbaudrate;
+ clps711x_init_port(&s->cdev);
+
+ return console_register(&s->cdev);
+}
+
+static void clps711x_remove(struct device_d *dev)
+{
+ struct clps711x_uart *s = dev->priv;
+
+ clps711x_flush(&s->cdev);
+ console_unregister(&s->cdev);
+ free(s);
+}
+
+static struct driver_d clps711x_driver = {
+ .name = "clps711x_serial",
+ .probe = clps711x_probe,
+ .remove = clps711x_remove,
+};
+
+static int clps711x_init(void)
+{
+ return platform_driver_register(&clps711x_driver);
+}
+console_initcall(clps711x_init);
--
1.7.8.6
More information about the barebox
mailing list