TX53: Not Bootable from next tree

Peter Wippich pewi at gw-instruments.de
Mon Nov 12 06:22:33 EST 2012




On Mon, 12 Nov 2012, Sascha Hauer wrote:

> On Tue, Nov 06, 2012 at 02:49:06PM +0100, Peter Wippich wrote:
>>
>> Hi,
>>
>> got the same problem here. Double checked Board Version (8030) and
>> that I have the right binary (compressed with flash header). After
>> flashing and reset nothing happens....
>
> I'm back in the office now and realized that we have the 1011
> revision in our remotelab. That at least explains why I can't reproduce
> this issue. Unfortunately I can't find the 8030 revision anywhere in the
> office, I'll wait for my collegue.
> In the meantime, could you try removing the call to
> imx53_init_lowlevel() and try booting 2nd stage (from U-Boot or
> redboot)?
>
> Sascha


Hi Sascha,

bad enough my test board is out for some customer tests. I'll try a second 
stage boot as soon as it is back.

Best regards,

Peter


>
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
>


|       Peter Wippich                   Voice: +49 30 46776411          |
|       G&W Instruments GmbH            fax:   +49 30 46776419          |
|       Gustav-Meyer-Allee 25, Geb. 12  Email: pewi at gw-instruments.de   |
|       D-13355 Berlin  / Germany                                       |




More information about the barebox mailing list