[TX53: boot fixes 0/2] Make TX53 bootable again

[Sascha Hauer]

On Thu, Nov 15, 2012 at 10:57:13AM +0100, Christian Kapeller wrote:
> Currently KaRo TX53-8030 soc module support is present in next branch, but
> compiling the default config tx53stk5_defconfig results in an unbootable image.
> 
> This series 
>  * makes the TX53-8030 board boot again [1/2]
>  * fixes compilation of the TX53 board with PBL_IMAGE=n and DO_LOWLEVEL_RESET=n [2/2]

Applied. Thanks for fixing this.

Sascha

> 
> Christian Kapeller (2):
>   tx53: Fix unbootable TX53-8030.
>   tx53: remove reset() when not doing lowlevel init.
> 
>  arch/arm/boards/karo-tx53/dcd-data-xx30.h |    1 -
>  arch/arm/boards/karo-tx53/lowlevel.c      |    3 +++
>  2 files changed, 3 insertions(+), 1 deletions(-)
> 
> -- 
> 1.7.5.4
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |