[PATCH 3/4] i.MX27 regs remove unnecessary include

[Sascha Hauer]

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 arch/arm/boards/phycard-i.MX27/lowlevel_init.S |    1 +
 arch/arm/mach-imx/include/mach/imx27-regs.h    |    2 --
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/boards/phycard-i.MX27/lowlevel_init.S b/arch/arm/boards/phycard-i.MX27/lowlevel_init.S
index 8f0000f..38cc55c 100644
--- a/arch/arm/boards/phycard-i.MX27/lowlevel_init.S
+++ b/arch/arm/boards/phycard-i.MX27/lowlevel_init.S
@@ -7,6 +7,7 @@
 #include <config.h>
 #include <mach/imx27-regs.h>
 #include <mach/imx-pll.h>
+#include <mach/esdctl.h>
 #include <asm/barebox-arm-head.h>
 
 #define writel(val, reg) \
diff --git a/arch/arm/mach-imx/include/mach/imx27-regs.h b/arch/arm/mach-imx/include/mach/imx27-regs.h
index 90b4614..44bc1d3 100644
--- a/arch/arm/mach-imx/include/mach/imx27-regs.h
+++ b/arch/arm/mach-imx/include/mach/imx27-regs.h
@@ -124,8 +124,6 @@
 #define MX27_WBCR	0x1C	/* Well Bias Control Register */
 #define MX27_DSCR(x)	(0x1C + ((x) << 2))	/* Driving Strength Control Register 1 - 13 */
 
-#include "esdctl.h"
-
 /* PLL registers (base: MX27_CCM_BASE_ADDR) */
 #define MX27_CSCR	0x00 /* Clock Source Control Register       */
 #define MX27_MPCTL0	0x04 /* MCU PLL Control Register 0          */
-- 
1.7.10.4