[PATCH 1/1] mtd: dataflash: fix spi_transfer init

[Sascha Hauer]

On Thu, Nov 01, 2012 at 10:16:55AM +0100,  wrote:
> From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> 
> on some system as the spi_transfer is not set to 0 if the rx_buf or tx_buf
> are not used they are not set to NULL
> 
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>

Applied, thanks

Sascha

> ---
>  drivers/mtd/devices/mtd_dataflash.c |    6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
> index cbed15b..3b7b9c6 100644
> --- a/drivers/mtd/devices/mtd_dataflash.c
> +++ b/drivers/mtd/devices/mtd_dataflash.c
> @@ -161,6 +161,8 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
>  
>  	spi_message_init(&msg);
>  
> +	memset(&x, 0, sizeof(x));
> +
>  	x.tx_buf = command = priv->command;
>  	x.len = 4;
>  	spi_message_add_tail(&x, &msg);
> @@ -246,6 +248,8 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
>  
>  	spi_message_init(&msg);
>  
> +	memset(&x[0], 0, sizeof(struct spi_transfer) * 2);
> +
>  	x[0].tx_buf = command;
>  	x[0].len = 8;
>  	spi_message_add_tail(&x[0], &msg);
> @@ -302,6 +306,8 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
>  
>  	spi_message_init(&msg);
>  
> +	memset(&x[0], 0, sizeof(struct spi_transfer) * 2);
> +
>  	x[0].tx_buf = command = priv->command;
>  	x[0].len = 4;
>  	spi_message_add_tail(&x[0], &msg);
> -- 
> 1.7.10.4
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |