[PATCH 2/2] commands: remove old Y-Modem implementation
Robert Jarzmik
robert.jarzmik at free.fr
Thu Nov 1 13:37:18 EDT 2012
From: Robert Jarzmik <robert.jarzmik at intel.com>
As a new implementation of Y-Modem protocol is available,
switch from old implementation to the new one :
- remove old xyzModem* files
- remove old command loady2
- rename command loady2 to loady
Signed-off-by: Robert Jarzmik <robert.jarzmik at intel.com>
---
commands/Makefile | 4 +-
commands/loadb.c | 102 +------
commands/loads.c | 1 -
commands/loadxy.c | 2 +-
commands/xyzModem.c | 785 ---------------------------------------------------
include/xyzModem.h | 109 -------
6 files changed, 12 insertions(+), 991 deletions(-)
delete mode 100644 commands/xyzModem.c
delete mode 100644 include/xyzModem.h
diff --git a/commands/Makefile b/commands/Makefile
index 342c1ee..833b41f 100644
--- a/commands/Makefile
+++ b/commands/Makefile
@@ -2,8 +2,8 @@ obj-$(CONFIG_STDDEV) += stddev.o
obj-$(CONFIG_CMD_BOOTM) += bootm.o
obj-$(CONFIG_CMD_UIMAGE) += uimage.o
obj-$(CONFIG_CMD_LINUX16) += linux16.o
-obj-$(CONFIG_CMD_LOADB) += loadb.o xyzModem.o
-obj-$(CONFIG_CMD_LOADY) += loadb.o xyzModem.o loadxy.o xymodem.o
+obj-$(CONFIG_CMD_LOADB) += loadb.o
+obj-$(CONFIG_CMD_LOADY) += loadxy.o xymodem.o
obj-$(CONFIG_CMD_LOADS) += loads.o
obj-$(CONFIG_CMD_ECHO) += echo.o
obj-$(CONFIG_CMD_MEMORY) += mem.o
diff --git a/commands/loadb.c b/commands/loadb.c
index 898b9e3..a2f3315 100644
--- a/commands/loadb.c
+++ b/commands/loadb.c
@@ -31,7 +31,6 @@
*/
#include <common.h>
#include <command.h>
-#include <xyzModem.h>
#include <console.h>
#include <errno.h>
#include <environment.h>
@@ -59,8 +58,6 @@
static int ofd; /* output file descriptor */
-#ifdef CONFIG_CMD_LOADB
-
/* Size of my buffer to write to o/p file */
#define MAX_WRITE_BUFFER 4096 /* Write size to o/p file */
static char *write_buffer; /* buffer for finalized data to write */
@@ -593,66 +590,6 @@ err_quit:
return size;
}
-#endif /* CONFIG_CMD_LOADB */
-
-#ifdef CONFIG_CMD_LOADY
-/**
- * @brief getcxmodem
- *
- * @return if character avaiable, return the same, else return -1
- */
-static int getcxmodem(void)
-{
- if (tstc())
- return (getc());
- return -1;
-}
-
-/**
- * @brief LoadY over ymodem protocol
- *
- * @return download size
- */
-static ulong load_serial_ymodem(void)
-{
- int size;
- char buf[32];
- int err;
- int res, wr;
- connection_info_t info;
- char ymodemBuf[1024];
- ulong addr = 0;
-
- size = 0;
- info.mode = xyzModem_ymodem;
- res = xyzModem_stream_open(&info, &err);
- if (!res) {
- while ((res = xyzModem_stream_read(ymodemBuf, 1024, &err)) >
- 0) {
- size += res;
- addr += res;
- wr = write(ofd, ymodemBuf, res);
- if (res != wr) {
- perror("ymodem");
- break;
- }
-
- }
- } else {
- printf("%s\n", xyzModem_error(err));
- }
-
- xyzModem_stream_close(&err);
- xyzModem_stream_terminate(false, &getcxmodem);
-
- printf("## Total Size = 0x%08x = %d Bytes\n", size, size);
- sprintf(buf, "%X", size);
- setenv("filesize", buf);
-
- return res;
-}
-#endif
-
/**
* @brief returns current used console device
*
@@ -754,27 +691,16 @@ static int do_load_serial_bin(int argc, char *argv[])
break;
}
}
-#ifdef CONFIG_CMD_LOADY
- if (strcmp(argv[0], "loady") == 0) {
- printf("## Ready for binary (ymodem) download "
- "to 0x%08lX offset on %s device at %d bps...\n", offset,
- output_file, load_baudrate);
- addr = load_serial_ymodem();
- }
-#endif
-#ifdef CONFIG_CMD_LOADB
- if (strcmp(argv[0], "loadb") == 0) {
-
- printf("## Ready for binary (kermit) download "
- "to 0x%08lX offset on %s device at %d bps...\n", offset,
- output_file, load_baudrate);
- addr = load_serial_bin();
- if (addr == 0) {
- printf("## Binary (kermit) download aborted\n");
- rcode = 1;
- }
+
+ printf("## Ready for binary (kermit) download "
+ "to 0x%08lX offset on %s device at %d bps...\n", offset,
+ output_file, load_baudrate);
+ addr = load_serial_bin();
+ if (addr == 0) {
+ printf("## Binary (kermit) download aborted\n");
+ rcode = 1;
}
-#endif
+
if (load_baudrate != current_baudrate) {
printf("## Switch baudrate to %d bps and press ESC ...\n",
current_baudrate);
@@ -799,18 +725,8 @@ static const __maybe_unused char cmd_loadb_help[] =
" -b baud - baudrate at which to download - defaults to "
"console baudrate\n"
" -c - Create file if it is not present - default disabled";
-#ifdef CONFIG_CMD_LOADB
BAREBOX_CMD_START(loadb)
.cmd = do_load_serial_bin,
.usage = "Load binary file over serial line (kermit mode)",
BAREBOX_CMD_HELP(cmd_loadb_help)
BAREBOX_CMD_END
-#endif
-#ifdef CONFIG_CMD_LOADY
-BAREBOX_CMD_START(loady)
- .cmd = do_load_serial_bin,
- .usage = "Load binary file over serial line (ymodem mode)",
- BAREBOX_CMD_HELP(cmd_loadb_help)
-BAREBOX_CMD_END
-#endif
-
diff --git a/commands/loads.c b/commands/loads.c
index 7f4c647..bfc465b 100644
--- a/commands/loads.c
+++ b/commands/loads.c
@@ -25,7 +25,6 @@
#include <environment.h>
#include <s_record.h>
#include <net.h>
-#include <xyzModem.h>
static ulong load_serial(ulong offset);
static int read_record(char *buf, ulong len);
diff --git a/commands/loadxy.c b/commands/loadxy.c
index 141bd7b..8914655 100644
--- a/commands/loadxy.c
+++ b/commands/loadxy.c
@@ -230,7 +230,7 @@ static const __maybe_unused char cmd_loady_help[] =
"console baudrate\n";
#ifdef CONFIG_CMD_LOADY
-BAREBOX_CMD_START(loady2)
+BAREBOX_CMD_START(loady)
.cmd = do_loady,
.usage = "Load binary file over serial line (Y-Modem or Y-Modem/G)",
BAREBOX_CMD_HELP(cmd_loady_help)
diff --git a/commands/xyzModem.c b/commands/xyzModem.c
deleted file mode 100644
index 71d7d68..0000000
--- a/commands/xyzModem.c
+++ /dev/null
@@ -1,785 +0,0 @@
-/**
- * @file
- * @brief RedBoot stream handler for xyzModem protocol
- *
- * FileName: commands/xyzModem.c
- * Originally from u-boot xyzModem.c
- */
-/*
- * 2008 - Nishanth Menon <x0nishan at ti.com>
- * Modified for sparse and checkpatch.pl compliance
- */
-/*
- *==========================================================================
- *
- * xyzModem.c
- *
- * RedBoot stream handler for xyzModem protocol
- *
- *==========================================================================
- *####ECOSGPLCOPYRIGHTBEGIN####
- * -------------------------------------------
- * This file is part of eCos, the Embedded Configurable Operating System.
- * Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
- * Copyright (C) 2002 Gary Thomas
- *
- * eCos is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 or (at your option) any later version.
- *
- * eCos is distributed in the hope that it will be useful, but WITHOUT ANY
- * WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with eCos; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * As a special exception, if other files instantiate templates or use macros
- * or inline functions from this file, or you compile this file and link it
- * with other works to produce a work based on this file, this file does not
- * by itself cause the resulting work to be covered by the GNU General Public
- * License. However the source code for this file must still be made available
- * in accordance with section (3) of the GNU General Public License.
- *
- * This exception does not invalidate any other reasons why a work based on
- * this file might be covered by the GNU General Public License.
- *
- * Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
- * at http: *sources.redhat.com/ecos/ecos-license/
- * -------------------------------------------
- *####ECOSGPLCOPYRIGHTEND####
- *==========================================================================
- *#####DESCRIPTIONBEGIN####
- *
- * Author(s): gthomas
- * Contributors: gthomas, tsmith, Yoshinori Sato
- * Date: 2000-07-14
- * Purpose:
- * Description:
- *
- * This code is part of RedBoot (tm).
- *
- *####DESCRIPTIONEND####
- *
- *==========================================================================
- */
-#include <common.h>
-#include <xyzModem.h>
-#include <stdarg.h>
-#include <stdio.h>
-#include <console.h>
-#include <crc.h>
-#include <linux/ctype.h>
-
-/* Assumption - run xyzModem protocol over the console port */
-
-/* Values magic to the protocol */
-#define SOH 0x01
-#define STX 0x02
-#define EOT 0x04
-#define ACK 0x06
-#define BSP 0x08
-#define NAK 0x15
-#define CAN 0x18
-#define EOF 0x1A /* ^Z for DOS officionados */
-
-#define USE_YMODEM_LENGTH
-
-/* Data & state local to the protocol */
-static struct {
-#ifdef REDBOOT
- hal_virtual_comm_table_t *__chan;
-#else
- int *__chan;
-#endif
- unsigned char pkt[1024], *bufp;
- unsigned char blk, cblk, crc1, crc2;
- unsigned char next_blk; /* Expected block */
- int len, mode, total_retries;
- int total_SOH, total_STX, total_CAN;
- bool crc_mode, at_eof, tx_ack;
-#ifdef USE_YMODEM_LENGTH
- unsigned long file_length, read_length;
-#endif
-} xyz;
-
-#define xyzModem_CHAR_TIMEOUT 2000 /* 2 seconds */
-#define xyzModem_MAX_RETRIES 20
-#define xyzModem_MAX_RETRIES_WITH_CRC 10
-/* Wait for 3 CAN before quitting */
-#define xyzModem_CAN_COUNT 3
-
-#ifndef REDBOOT /*SB */
-typedef int cyg_int32;
-static int CYGACC_COMM_IF_GETC_TIMEOUT(char chan, char *c)
-{
-#define DELAY 20
- unsigned long counter = 0;
- while (!tstc() && (counter < xyzModem_CHAR_TIMEOUT * 1000 / DELAY)) {
- udelay(DELAY);
- counter++;
- }
- if (tstc()) {
- *c = getc();
- return 1;
- }
- return 0;
-}
-
-static void CYGACC_COMM_IF_PUTC(char x, char y)
-{
- console_putc(CONSOLE_STDOUT, y);
-}
-
-/* Validate a hex character */
-static inline bool _is_hex(char c)
-{
- return (((c >= '0') && (c <= '9')) ||
- ((c >= 'A') && (c <= 'F')) || ((c >= 'a') && (c <= 'f')));
-}
-
-/* Convert a single hex nibble */
-static inline int _from_hex(char c)
-{
- int ret = 0;
-
- if ((c >= '0') && (c <= '9'))
- ret = (c - '0');
- else if ((c >= 'a') && (c <= 'f'))
- ret = (c - 'a' + 0x0a);
- else if ((c >= 'A') && (c <= 'F'))
- ret = (c - 'A' + 0x0A);
-
- return ret;
-}
-
-/* Parse (scan) a number */
-static bool parse_num(char *s, unsigned long *val, char **es, char *delim)
-{
- bool first = true;
- int radix = 10;
- char c;
- unsigned long result = 0;
- int digit = 0;
-
- while (*s == ' ')
- s++;
- while (*s) {
- if (first && (s[0] == '0') && (tolower(s[1]) == 'x')) {
- radix = 16;
- s += 2;
- }
- first = false;
- c = *s++;
- if (_is_hex(c))
- digit = _from_hex(c);
- if (_is_hex(c) && (digit < radix)) {
- /* Valid digit */
-#ifdef CYGPKG_HAL_MIPS
- /* FIXME: tx49 compiler generates 0x2539018 for
- * MUL which isn't any good. */
- if (16 == radix)
- result = result << 4;
- else
- result = 10 * result;
- result += digit;
-#else
- result = (result * radix) + digit;
-#endif
- } else {
- if (delim != (char *)0) {
- /* See if this character is one of the
- * delimiters */
- char *dp = delim;
- while (*dp && (c != *dp))
- dp++;
- if (*dp)
- break; /* Found a good delimiter */
- }
- return false; /* Malformatted number */
- }
- }
- *val = result;
- if (es != (char **)0)
- *es = s;
- return true;
-}
-
-#endif
-
-#define USE_SPRINTF
-#ifdef DEBUG
-#ifndef USE_SPRINTF
-/*
- * Note: this debug setup only works if the target platform has two serial ports
- * available so that the other one (currently only port 1) can be used for debug
- * messages.
- */
-static int zm_dprintf(char *fmt, ...)
-{
- int cur_console;
- va_list args;
-
- va_start(args, fmt);
-#ifdef REDBOOT
- cur_console =
- CYGACC_CALL_IF_SET_CONSOLE_COMM
- (CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
- CYGACC_CALL_IF_SET_CONSOLE_COMM(1);
-#endif
- diag_vprintf(fmt, args);
-#ifdef REDBOOT
- CYGACC_CALL_IF_SET_CONSOLE_COMM(cur_console);
-#endif
-}
-
-static void zm_flush(void)
-{
-}
-
-#else
-/*
- * Note: this debug setup works by storing the strings in a fixed buffer
- */
-#define FINAL
-#ifdef FINAL
-static char *zm_out = (char *)0x00380000;
-static char *zm_out_start = (char *)0x00380000;
-#else
-static char zm_buf[8192];
-static char *zm_out = zm_buf;
-static char *zm_out_start = zm_buf;
-
-#endif
-static int zm_dprintf(char *fmt, ...)
-{
- int len;
- va_list args;
-
- va_start(args, fmt);
- len = diag_vsprintf(zm_out, fmt, args);
- zm_out += len;
- return len;
-}
-
-static void zm_flush(void)
-{
-#ifdef REDBOOT
- char *p = zm_out_start;
- while (*p)
- mon_write_char(*p++);
-#endif
- zm_out = zm_out_start;
-}
-#endif
-
-static void zm_dump_buf(void *buf, int len)
-{
-#ifdef REDBOOT
- diag_vdump_buf_with_offset(zm_dprintf, buf, len, 0);
-#else
-
-#endif
-}
-
-static unsigned char zm_buf[2048];
-static unsigned char *zm_bp;
-
-static void zm_new(void)
-{
- zm_bp = zm_buf;
-}
-
-static void zm_save(unsigned char c)
-{
- *zm_bp++ = c;
-}
-
-static void zm_dump(int line)
-{
- zm_dprintf("Packet at line: %d\n", line);
- zm_dump_buf(zm_buf, zm_bp - zm_buf);
-}
-
-#define ZM_DEBUG(x) x
-#else
-#define ZM_DEBUG(x)
-#endif
-
-/* Wait for the line to go idle */
-static void xyzModem_flush(void)
-{
- int res;
- char c;
- while (true) {
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
- if (!res)
- return;
- }
-}
-
-static int xyzModem_get_hdr(void)
-{
- char c;
- int res;
- bool hdr_found = false;
- int i, can_total, hdr_chars;
- unsigned short cksum;
-
- ZM_DEBUG(zm_new());
- /* Find the start of a header */
- can_total = 0;
- hdr_chars = 0;
-
- if (xyz.tx_ack) {
- CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
- xyz.tx_ack = false;
- }
- while (!hdr_found) {
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
- ZM_DEBUG(zm_save(c));
- if (res) {
- hdr_chars++;
- switch (c) {
- case SOH:
- xyz.total_SOH++;
- case STX:
- if (c == STX)
- xyz.total_STX++;
- hdr_found = true;
- break;
- case CAN:
- xyz.total_CAN++;
- ZM_DEBUG(zm_dump(__LINE__));
- if (++can_total == xyzModem_CAN_COUNT) {
- return xyzModem_cancel;
- } else {
- /* Wait for multiple CAN to avoid
- * early quits */
- break;
- }
- case EOT:
- /* EOT only supported if no noise */
- if (hdr_chars == 1) {
- CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
- ZM_DEBUG(zm_dprintf
- ("ACK on EOT #%d\n",
- __LINE__));
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_eof;
- }
- default:
- /* Ignore, waiting for start of header */
- ;
- }
- } else {
- /* Data stream timed out */
- xyzModem_flush(); /* Toss any current input */
- ZM_DEBUG(zm_dump(__LINE__));
- CYGACC_CALL_IF_DELAY_US((cyg_int32) 250000);
- return xyzModem_timeout;
- }
- }
-
- /* Header found, now read the data */
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.blk);
- ZM_DEBUG(zm_save(xyz.blk));
- if (!res) {
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_timeout;
- }
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.cblk);
- ZM_DEBUG(zm_save(xyz.cblk));
- if (!res) {
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_timeout;
- }
- xyz.len = (c == SOH) ? 128 : 1024;
- xyz.bufp = xyz.pkt;
- for (i = 0; i < xyz.len; i++) {
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
- ZM_DEBUG(zm_save(c));
- if (res) {
- xyz.pkt[i] = c;
- } else {
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_timeout;
- }
- }
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.crc1);
- ZM_DEBUG(zm_save(xyz.crc1));
- if (!res) {
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_timeout;
- }
- if (xyz.crc_mode) {
- res =
- CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.crc2);
- ZM_DEBUG(zm_save(xyz.crc2));
- if (!res) {
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_timeout;
- }
- }
- ZM_DEBUG(zm_dump(__LINE__));
- /* Validate the message */
- if ((xyz.blk ^ xyz.cblk) != (unsigned char)0xFF) {
- ZM_DEBUG(zm_dprintf
- ("Framing error - blk: %x/%x/%x\n", xyz.blk, xyz.cblk,
- (xyz.blk ^ xyz.cblk)));
- ZM_DEBUG(zm_dump_buf(xyz.pkt, xyz.len));
- xyzModem_flush();
- return xyzModem_frame;
- }
- /* Verify checksum/CRC */
- if (xyz.crc_mode) {
- cksum = cyg_crc16(xyz.pkt, xyz.len);
- if (cksum != ((xyz.crc1 << 8) | xyz.crc2)) {
- ZM_DEBUG(zm_dprintf
- ("CRC error - recvd: %02x%02x, computed: %x\n",
- xyz.crc1, xyz.crc2, cksum & 0xFFFF));
- return xyzModem_cksum;
- }
- } else {
- cksum = 0;
- for (i = 0; i < xyz.len; i++)
- cksum += xyz.pkt[i];
- if (xyz.crc1 != (cksum & 0xFF)) {
- ZM_DEBUG(zm_dprintf
- ("Checksum error - recvd: %x, computed: %x\n",
- xyz.crc1, cksum & 0xFF));
- return xyzModem_cksum;
- }
- }
- /* If we get here, the message passes [structural] muster */
- return 0;
-}
-
-int xyzModem_stream_open(connection_info_t *info, int *err)
-{
-#ifdef REDBOOT
- int console_chan;
-#endif
- int stat = 0;
- int retries = xyzModem_MAX_RETRIES;
- int crc_retries = xyzModem_MAX_RETRIES_WITH_CRC;
-
-/* ZM_DEBUG(zm_out = zm_out_start); */
-#ifdef xyzModem_zmodem
- if (info->mode == xyzModem_zmodem) {
- *err = xyzModem_noZmodem;
- return -1;
- }
-#endif
-
-#ifdef REDBOOT
- /* Set up the I/O channel. Note: this allows for using a different
- * port in the future */
- console_chan =
- CYGACC_CALL_IF_SET_CONSOLE_COMM
- (CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
- if (info->chan >= 0)
- CYGACC_CALL_IF_SET_CONSOLE_COMM(info->chan);
- else
- CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan);
-
- xyz.__chan = CYGACC_CALL_IF_CONSOLE_PROCS();
-
- CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan);
- CYGACC_COMM_IF_CONTROL(*xyz.__chan, __COMMCTL_SET_TIMEOUT,
- xyzModem_CHAR_TIMEOUT);
-#else
-/* TODO: CHECK ! */
- int dummy = 0;
- xyz.__chan = &dummy;
-#endif
- xyz.len = 0;
- xyz.crc_mode = true;
- xyz.at_eof = false;
- xyz.tx_ack = false;
- xyz.mode = info->mode;
- xyz.total_retries = 0;
- xyz.total_SOH = 0;
- xyz.total_STX = 0;
- xyz.total_CAN = 0;
-#ifdef USE_YMODEM_LENGTH
- xyz.read_length = 0;
- xyz.file_length = 0;
-#endif
-
- CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
-
- if (xyz.mode == xyzModem_xmodem) {
- /* X-modem doesn't have an information header - exit here */
- xyz.next_blk = 1;
- return 0;
- }
-
- while (retries-- > 0) {
- stat = xyzModem_get_hdr();
- if (stat == 0) {
- /* Y-modem file information header */
- if (xyz.blk == 0) {
-#ifdef USE_YMODEM_LENGTH
- /* skip filename */
- while (*xyz.bufp++) ;
- /* get the length */
- parse_num((char *)xyz.bufp, &xyz.file_length,
- NULL, " ");
-#endif
- /* The rest of the file name data block
- * quietly discarded
- */
- xyz.tx_ack = true;
- }
- xyz.next_blk = 1;
- xyz.len = 0;
- return 0;
- } else if (stat == xyzModem_timeout) {
- if (--crc_retries <= 0)
- xyz.crc_mode = false;
- /* Extra delay for startup */
- CYGACC_CALL_IF_DELAY_US(5 * 100000);
- CYGACC_COMM_IF_PUTC(*xyz.__chan,
- (xyz.crc_mode ? 'C' : NAK));
- xyz.total_retries++;
- ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__));
- }
- if (stat == xyzModem_cancel)
- break;
- }
- *err = stat;
- ZM_DEBUG(zm_flush());
- return -1;
-}
-
-int xyzModem_stream_read(char *buf, int size, int *err)
-{
- int stat, total, len;
- int retries;
-
- total = 0;
- stat = xyzModem_cancel;
- /* Try and get 'size' bytes into the buffer */
- while (!xyz.at_eof && (size > 0)) {
- if (xyz.len == 0) {
- retries = xyzModem_MAX_RETRIES;
- while (retries-- > 0) {
- stat = xyzModem_get_hdr();
- if (stat == 0) {
- if (xyz.blk == xyz.next_blk) {
- xyz.tx_ack = true;
- ZM_DEBUG(zm_dprintf
- ("ACK block %d (%d)\n",
- xyz.blk, __LINE__));
- xyz.next_blk =
- (xyz.next_blk + 1) & 0xFF;
-
-#if defined(xyzModem_zmodem) || defined(USE_YMODEM_LENGTH)
- if (xyz.mode == xyzModem_xmodem
- || xyz.file_length == 0) {
-#else
- if (1) {
-#endif
- /* WARNING - Leaving formatting aside for code
- * clarity */
- /* Data blocks can be padded with ^Z (EOF) characters */
- /* This code tries to detect and remove them */
- if ((xyz.bufp[xyz.len - 1] == EOF)
- && (xyz.bufp[xyz.len - 2] == EOF)
- && (xyz.bufp[xyz.len - 3] == EOF)) {
- while (xyz.len &&
- (xyz.bufp[xyz.len - 1] == EOF))
- xyz.len--;
- }
- }
-#ifdef USE_YMODEM_LENGTH
- /* WARNING - Leaving formatting aside for code
- * clarity */
- /*
- * See if accumulated length exceeds that of the file.
- * If so, reduce size (i.e., cut out pad bytes)
- * Only do this for Y-modem (and Z-modem should it ever
- * be supported since it can fall back to Y-modem mode).
- */
- if (xyz.mode != xyzModem_xmodem
- && 0 != xyz.file_length) {
- xyz.read_length += xyz.len;
- if (xyz.read_length > xyz.file_length)
- xyz.len -= (xyz.read_length -
- xyz.file_length);
- }
-#endif
- break;
- } else if (xyz.blk ==
- ((xyz.next_blk - 1) &
- 0xFF)) {
- /* Just re-ACK this so sender
- * will get on with it */
- CYGACC_COMM_IF_PUTC(*xyz.__chan,
- ACK);
- /* Need new header */
- continue;
- } else
- stat = xyzModem_sequence;
- }
- if (stat == xyzModem_cancel)
- break;
- if (stat == xyzModem_eof) {
- CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
- ZM_DEBUG(zm_dprintf
- ("ACK (%d)\n", __LINE__));
- if (xyz.mode == xyzModem_ymodem) {
- CYGACC_COMM_IF_PUTC(*xyz.__chan,
- (xyz.
- crc_mode ?
- 'C' :
- NAK));
- xyz.total_retries++;
- ZM_DEBUG(zm_dprintf
- ("Reading Final Header\n"));
- stat = xyzModem_get_hdr();
- CYGACC_COMM_IF_PUTC(*xyz.__chan,
- ACK);
- ZM_DEBUG(zm_dprintf
- ("FINAL ACK (%d)\n",
- __LINE__));
- }
- xyz.at_eof = true;
- break;
- }
- CYGACC_COMM_IF_PUTC(*xyz.__chan,
- (xyz.crc_mode ? 'C' : NAK));
- xyz.total_retries++;
- ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__));
- }
- if (stat < 0) {
- *err = stat;
- xyz.len = -1;
- return total;
- }
- }
- /* Don't "read" data from the EOF protocol package */
- if (!xyz.at_eof) {
- len = xyz.len;
- if (size < len)
- len = size;
- memcpy(buf, xyz.bufp, len);
- size -= len;
- buf += len;
- total += len;
- xyz.len -= len;
- xyz.bufp += len;
- }
- }
- return total;
-}
-
-void xyzModem_stream_close(int *err)
-{
- diag_printf
- ("xyzModem - %s mode, %d(SOH)/%d(STX)/%d(CAN) packets,"
- " %d retries\n",
- xyz.crc_mode ? "CRC" : "Cksum", xyz.total_SOH, xyz.total_STX,
- xyz.total_CAN, xyz.total_retries);
- ZM_DEBUG(zm_flush());
-}
-
-/* Need to be able to clean out the input buffer, so have to take the */
-/* getc */
-void xyzModem_stream_terminate(bool abort, int (*getc) (void))
-{
- int c;
-
- if (abort) {
- ZM_DEBUG(zm_dprintf("!!!! TRANSFER ABORT !!!!\n"));
- switch (xyz.mode) {
- case xyzModem_xmodem:
- case xyzModem_ymodem:
- /* The X/YMODEM Spec seems to suggest that multiple CAN
- * followed by an equal number of Backspaces is a
- * friendly way to get the other end to abort. */
- CYGACC_COMM_IF_PUTC(*xyz.__chan, CAN);
- CYGACC_COMM_IF_PUTC(*xyz.__chan, CAN);
- CYGACC_COMM_IF_PUTC(*xyz.__chan, CAN);
- CYGACC_COMM_IF_PUTC(*xyz.__chan, CAN);
- CYGACC_COMM_IF_PUTC(*xyz.__chan, BSP);
- CYGACC_COMM_IF_PUTC(*xyz.__chan, BSP);
- CYGACC_COMM_IF_PUTC(*xyz.__chan, BSP);
- CYGACC_COMM_IF_PUTC(*xyz.__chan, BSP);
- /* Now consume the rest of what's waiting on the line.*/
- ZM_DEBUG(zm_dprintf("Flushing serial line.\n"));
- xyzModem_flush();
- xyz.at_eof = true;
- break;
-#ifdef xyzModem_zmodem
- case xyzModem_zmodem:
- /* Might support it some day I suppose. */
-#endif
- break;
- }
- } else {
- ZM_DEBUG(zm_dprintf("Engaging cleanup mode...\n"));
- /*
- * Consume any trailing crap left in the inbuffer from
- * previous recieved blocks. Since very few files are an
- * exact multiple of the transfer block size, there will
- * almost always be some gunk here.
- * If we don't eat it now, RedBoot will think the user typed it.
- */
- ZM_DEBUG(zm_dprintf("Trailing gunk:\n"));
- while ((c = (*getc) ()) > -1) ;
- ZM_DEBUG(zm_dprintf("\n"));
- /*
- * Make a small delay to give terminal programs like minicom
- * time to get control again after their file transfer program
- * exits.
- */
- CYGACC_CALL_IF_DELAY_US((cyg_int32) 250000);
- }
-}
-
-char *xyzModem_error(int err)
-{
- switch (err) {
- case xyzModem_access:
- return "Can't access file";
- break;
- case xyzModem_noZmodem:
- return "Sorry, zModem not available yet";
- break;
- case xyzModem_timeout:
- return "Timed out";
- break;
- case xyzModem_eof:
- return "End of file";
- break;
- case xyzModem_cancel:
- return "Cancelled";
- break;
- case xyzModem_frame:
- return "Invalid framing";
- break;
- case xyzModem_cksum:
- return "CRC/checksum error";
- break;
- case xyzModem_sequence:
- return "Block sequence error";
- break;
- default:
- return "Unknown error";
- break;
- }
-}
-
-/*
- * RedBoot interface
- */
-#if 0 /* SB */
-GETC_IO_FUNCS(xyzModem_io, xyzModem_stream_open, xyzModem_stream_close,
- xyzModem_stream_terminate, xyzModem_stream_read, xyzModem_error);
-RedBoot_load(xmodem, xyzModem_io, false, false, xyzModem_xmodem);
-RedBoot_load(ymodem, xyzModem_io, false, false, xyzModem_ymodem);
-#endif
diff --git a/include/xyzModem.h b/include/xyzModem.h
deleted file mode 100644
index a3ea768..0000000
--- a/include/xyzModem.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- *==========================================================================
- *
- * xyzModem.h
- *
- * RedBoot stream handler for xyzModem protocol
- *
- *==========================================================================
- *####ECOSGPLCOPYRIGHTBEGIN####
- * -------------------------------------------
- * This file is part of eCos, the Embedded Configurable Operating System.
- * Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
- * Copyright (C) 2002 Gary Thomas
- *
- * eCos is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 or (at your option) any later version.
- *
- * eCos is distributed in the hope that it will be useful, but WITHOUT ANY
- * WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with eCos; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * As a special exception, if other files instantiate templates or use macros
- * or inline functions from this file, or you compile this file and link it
- * with other works to produce a work based on this file, this file does not
- * by itself cause the resulting work to be covered by the GNU General Public
- * License. However the source code for this file must still be made available
- * in accordance with section (3) of the GNU General Public License.
- *
- * This exception does not invalidate any other reasons why a work based on
- * this file might be covered by the GNU General Public License.
- *
- * Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
- * at http: *sources.redhat.com/ecos/ecos-license/
- * -------------------------------------------
- *####ECOSGPLCOPYRIGHTEND####
- *==========================================================================
- *#####DESCRIPTIONBEGIN####
- *
- * Author(s): gthomas
- * Contributors: gthomas
- * Date: 2000-07-14
- * Purpose:
- * Description:
- *
- * This code is part of RedBoot (tm).
- *
- *####DESCRIPTIONEND####
- *
- *==========================================================================
- */
-
-#ifndef _XYZMODEM_H_
-#define _XYZMODEM_H_
-
-#define xyzModem_xmodem 1
-#define xyzModem_ymodem 2
-/* Don't define this until the protocol support is in place */
-/*#define xyzModem_zmodem 3 */
-
-#define xyzModem_access -1
-#define xyzModem_noZmodem -2
-#define xyzModem_timeout -3
-#define xyzModem_eof -4
-#define xyzModem_cancel -5
-#define xyzModem_frame -6
-#define xyzModem_cksum -7
-#define xyzModem_sequence -8
-
-#define xyzModem_close 1
-#define xyzModem_abort 2
-
-
-#ifdef REDBOOT
-extern getc_io_funcs_t xyzModem_io;
-#else
-#define CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT
-#define CYGACC_CALL_IF_SET_CONSOLE_COMM(x)
-
-#define diag_vprintf vprintf
-#define diag_printf printf
-#define diag_vsprintf vsprintf
-
-#define CYGACC_CALL_IF_DELAY_US(x) udelay(x)
-
-typedef struct {
- char *filename;
- int mode;
- int chan;
-#ifdef CYGPKG_REDBOOT_NETWORKING
- struct sockaddr_in *server;
-#endif
-} connection_info_t;
-
-#endif
-
-
-int xyzModem_stream_open(connection_info_t *info, int *err);
-void xyzModem_stream_close(int *err);
-void xyzModem_stream_terminate(bool method, int (*getc)(void));
-int xyzModem_stream_read(char *buf, int size, int *err);
-char *xyzModem_error(int err);
-
-#endif /* _XYZMODEM_H_ */
--
1.7.10
More information about the barebox
mailing list