[RFC 1/3] MIPS: add pre-bootloader (pbl) image support
Antony Pavlov
antonynpavlov at gmail.com
Sat Nov 17 07:10:37 EST 2012
This patch is based on ARM pbl support and allows
creating a pre-bootloader binary for compressed image.
Signed-off-by: Antony Pavlov <antonynpavlov at gmail.com>
---
arch/mips/Kconfig | 2 +
arch/mips/Makefile | 18 +++++
arch/mips/boot/Makefile | 2 +
arch/mips/boot/main_entry-pbl.c | 90 ++++++++++++++++++++++++
arch/mips/boot/start-pbl.S | 146 +++++++++++++++++++++++++++++++++++++++
arch/mips/pbl/.gitignore | 6 ++
arch/mips/pbl/Makefile | 40 +++++++++++
arch/mips/pbl/piggy.gzip.S | 6 ++
arch/mips/pbl/piggy.lzo.S | 6 ++
arch/mips/pbl/zbarebox.lds.S | 57 +++++++++++++++
10 files changed, 373 insertions(+)
create mode 100644 arch/mips/boot/main_entry-pbl.c
create mode 100644 arch/mips/boot/start-pbl.S
create mode 100644 arch/mips/pbl/.gitignore
create mode 100644 arch/mips/pbl/Makefile
create mode 100644 arch/mips/pbl/piggy.gzip.S
create mode 100644 arch/mips/pbl/piggy.lzo.S
create mode 100644 arch/mips/pbl/zbarebox.lds.S
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 7a1eeac..853d406 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -6,6 +6,8 @@ config MIPS
select HAS_KALLSYMS
select HAVE_CONFIGURABLE_MEMORY_LAYOUT
select HAVE_CONFIGURABLE_TEXT_BASE
+ select HAVE_PBL_IMAGE
+ select HAVE_IMAGE_COMPRESSION
default y
config SYS_SUPPORTS_BIG_ENDIAN
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 5e40de7..819e7a3 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -58,6 +58,15 @@ CPPFLAGS += -fdata-sections -ffunction-sections
LDFLAGS_barebox += -static --gc-sections
endif
+ifdef CONFIG_IMAGE_COMPRESSION
+KBUILD_BINARY := arch/mips/pbl/zbarebox.bin
+KBUILD_TARGET := zbarebox.bin
+$(KBUILD_BINARY): $(KBUILD_TARGET)
+else
+KBUILD_BINARY := barebox.bin
+KBUILD_TARGET := barebox.bin
+endif
+
LDFLAGS_barebox += -nostdlib
machine-$(CONFIG_MACH_MIPS_MALTA) := malta
@@ -106,3 +115,12 @@ CFLAGS += $(cflags-y)
lds-$(CONFIG_GENERIC_LINKER_SCRIPT) := arch/mips/lib/barebox.lds
CLEAN_FILES += arch/mips/lib/barebox.lds barebox.map barebox.S
+
+pbl := arch/mips/pbl
+zbarebox.S zbarebox.bin zbarebox: barebox.bin
+ $(Q)$(MAKE) $(build)=$(pbl) $(pbl)/$@
+
+archclean:
+ $(MAKE) $(clean)=$(pbl)
+
+KBUILD_IMAGE ?= $(KBUILD_BINARY)
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
index d6d28ce..6b093f1 100644
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@@ -1,2 +1,4 @@
obj-y += start.o
obj-y += main_entry.o
+
+pbl-y += start-pbl.o main_entry-pbl.o
diff --git a/arch/mips/boot/main_entry-pbl.c b/arch/mips/boot/main_entry-pbl.c
new file mode 100644
index 0000000..51b9176
--- /dev/null
+++ b/arch/mips/boot/main_entry-pbl.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2012 Antony Pavlov <antonynpavlov at gmail.com>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <sizes.h>
+#include <string.h>
+#include <asm/sections.h>
+#include <asm-generic/memory_layout.h>
+#include <debug_ll.h>
+
+extern void *input_data;
+extern void *input_data_end;
+
+unsigned long free_mem_ptr;
+unsigned long free_mem_end_ptr;
+
+#define STATIC static
+
+#ifdef CONFIG_IMAGE_COMPRESSION_LZO
+#include "../../../lib/decompress_unlzo.c"
+#endif
+
+#ifdef CONFIG_IMAGE_COMPRESSION_GZIP
+#include "../../../lib/decompress_inflate.c"
+#endif
+
+void pbl_main_entry(void);
+
+static unsigned long *ttb;
+
+static noinline void errorfn(char *error)
+{
+ PUTS_LL(error);
+ PUTC_LL('\n');
+
+ unreachable();
+}
+
+static void barebox_uncompress(void *compressed_start, unsigned int len)
+{
+ /* set 128 KiB at the end of the MALLOC_BASE for early malloc */
+ free_mem_ptr = MALLOC_BASE + MALLOC_SIZE - SZ_128K;
+ free_mem_end_ptr = free_mem_ptr + SZ_128K;
+
+ ttb = (void *)((free_mem_ptr - 0x4000) & ~0x3fff);
+
+ decompress((void *)compressed_start,
+ len,
+ NULL, NULL,
+ (void *)TEXT_BASE, NULL, errorfn);
+
+ /* FIXME: just now we have no MIPS cache support */
+ /* flush_icache(); */
+}
+
+void __section(.text_entry) pbl_main_entry(void)
+{
+ u32 pg_start, pg_end, pg_len;
+ void (*barebox)(void);
+
+ PUTS_LL("pbl_main_entry()\n");
+
+ /* clear bss */
+ memset(__bss_start, 0, __bss_stop - __bss_start);
+
+ pg_start = (u32)&input_data;
+ pg_end = (u32)&input_data_end;
+ pg_len = pg_end - pg_start;
+
+ barebox_uncompress(&input_data, pg_len);
+
+ barebox = (void *)TEXT_BASE;
+ barebox();
+}
diff --git a/arch/mips/boot/start-pbl.S b/arch/mips/boot/start-pbl.S
new file mode 100644
index 0000000..ad39f42
--- /dev/null
+++ b/arch/mips/boot/start-pbl.S
@@ -0,0 +1,146 @@
+/*
+ * Startup Code for MIPS CPU
+ *
+ * Copyright (C) 2011, 2012 Antony Pavlov <antonynpavlov at gmail.com>
+ * ADR macro copyrighted (C) 2009 by Shinya Kuribayashi <skuribay at pobox.com>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/asm.h>
+#include <asm-generic/memory_layout.h>
+#include <generated/compile.h>
+#include <generated/utsrelease.h>
+
+//#include <mach/kernel-entry-init.h>
+
+ /*
+ * ADR macro instruction (inspired by ARM)
+ *
+ * ARM architecture doesn't have PC-relative jump instruction
+ * like MIPS' B/BAL insns. When ARM makes PC-relative jumps,
+ * it uses ADR insn. ADR is used to get a destination address
+ * of 'label' against current PC. With this, ARM can safely
+ * make PC-relative jumps.
+ */
+ .macro ADR rd label temp
+ .set push
+ .set noreorder
+ move \temp, ra # preserve ra beforehand
+ bal _pc
+ nop
+_pc: addiu \rd, ra, \label - _pc # label is assumed to be
+ move ra, \temp # within pc +/- 32KB
+ .set pop
+ .endm
+
+ .set noreorder
+ .text
+ .section ".text_head_entry"
+ .align 4
+
+EXPORT(pbl_start)
+
+ b __start
+ nop
+
+ .org 0x10
+ .ascii "barebox " UTS_RELEASE " " UTS_VERSION
+ .byte 0
+
+ .align 4
+__start:
+ /* disable watchpoints */
+ mtc0 zero, CP0_WATCHLO
+ mtc0 zero, CP0_WATCHHI
+
+ /* disable interrupts */
+ mfc0 k0, CP0_STATUS
+ li k1, ~ST0_IE
+ and k0, k1
+ mtc0 k0, CP0_STATUS
+
+ /* cpu specific setup */
+ //kernel_entry_setup
+
+ /* copy barebox to link location */
+ ADR a0, pbl_start, t1 /* a0 <- pc-relative
+ position of pbl_start */
+
+ la a1, pbl_start /* a1 <- link (RAM) pbl_start address */
+
+ beq a0, a1, stack_setup
+ nop
+
+ la t0, pbl_start
+ la t1, __bss_start
+ subu t2, t1, t0 /* t2 <- size of pbl */
+ addu a2, a0, t2 /* a2 <- source end address */
+
+#define LONGSIZE 4
+
+copy_loop:
+ /* copy from source address [a0] */
+ lw t4, LONGSIZE * 0(a0)
+ lw t5, LONGSIZE * 1(a0)
+ lw t6, LONGSIZE * 2(a0)
+ lw t7, LONGSIZE * 3(a0)
+ /* copy fo target address [a1] */
+ sw t4, LONGSIZE * 0(a1)
+ sw t5, LONGSIZE * 1(a1)
+ sw t6, LONGSIZE * 2(a1)
+ sw t7, LONGSIZE * 3(a1)
+ addi a0, LONGSIZE * 4
+ subu t3, a0, a2
+ blez t3, copy_loop
+ addi a1, LONGSIZE * 4
+
+ /*
+ * Dominic Sweetman, See MIPS Run, Morgan Kaufmann, 2nd edition, 2006
+ *
+ * 11.2.2 Stack Argument Structure in o32
+ * ...
+ * At the point where a function is called, sp must be
+ * eight-byte-aligned, matching the alignment of the largest
+ * basic types -- a long long integer or a floating-point double.
+ * The eight-byte alignment is not required by 32-bit MIPS integer
+ * hardware, but it's essential for compatibility with CPUs with
+ * 64-bit registers, and thus part of the rules. Subroutines fit
+ * in with this by always adjusting the stack pointer by a multiple
+ * of eight.
+ * ...
+ * SGI's n32 and n64 standards call for the stack to be maintained
+ * with 16-byte alignment.
+ *
+ */
+
+#if (STACK_BASE + STACK_SIZE) % 16 != 0
+#error stack pointer must be 16-byte-aligned
+#endif
+
+stack_setup:
+
+ /* set stack pointer; reserve four 32-bit argument slots */
+ la sp, STACK_BASE + STACK_SIZE - 16
+
+ la v0, pbl_main_entry
+ jal v0
+ nop
+
+ /* No return */
+__error:
+ b __error
+ nop
diff --git a/arch/mips/pbl/.gitignore b/arch/mips/pbl/.gitignore
new file mode 100644
index 0000000..d71bb7c
--- /dev/null
+++ b/arch/mips/pbl/.gitignore
@@ -0,0 +1,6 @@
+piggy.gzip
+piggy.lzo
+zbarebox
+zbarebox.bin
+zbarebox.lds
+zbarebox.map
diff --git a/arch/mips/pbl/Makefile b/arch/mips/pbl/Makefile
new file mode 100644
index 0000000..7faa51a
--- /dev/null
+++ b/arch/mips/pbl/Makefile
@@ -0,0 +1,40 @@
+
+suffix_$(CONFIG_IMAGE_COMPRESSION_GZIP) = gzip
+suffix_$(CONFIG_IMAGE_COMPRESSION_LZO) = lzo
+
+OBJCOPYFLAGS_zbarebox.bin = -O binary
+piggy_o := piggy.$(suffix_y).o
+
+targets := zbarebox.lds zbarebox zbarebox.bin zbarebox.S \
+ $(piggy_o) piggy.$(suffix_y)
+
+# Make sure files are removed during clean
+extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern zbarebox.map
+
+$(obj)/zbarebox.bin: $(obj)/zbarebox FORCE
+ $(call if_changed,objcopy)
+ $(call cmd,check_file_size,$(CONFIG_BAREBOX_MAX_IMAGE_SIZE))
+ $(Q)$(kecho) ' Barebox: $@ is ready'
+
+$(obj)/zbarebox.S: $(obj)/zbarebox FORCE
+ $(call if_changed,disasm)
+
+PBL_CPPFLAGS += -fdata-sections -ffunction-sections
+LDFLAGS_zbarebox := -Map $(obj)/zbarebox.map
+LDFLAGS_zbarebox += -static --gc-sections
+zbarebox-common := $(barebox-pbl-common) $(obj)/$(piggy_o)
+zbarebox-lds := $(obj)/zbarebox.lds
+
+quiet_cmd_zbarebox__ ?= LD $@
+ cmd_zbarebox__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_zbarebox) -o $@ \
+ -T $(zbarebox-lds) \
+ --start-group $(zbarebox-common) --end-group \
+ $(filter-out $(zbarebox-lds) $(zbarebox-common) FORCE ,$^)
+
+$(obj)/zbarebox: $(zbarebox-lds) $(zbarebox-common) FORCE
+ $(call if_changed,zbarebox__)
+
+$(obj)/piggy.$(suffix_y): $(obj)/../../../barebox.bin FORCE
+ $(call if_changed,$(suffix_y))
+
+$(obj)/$(piggy_o): $(obj)/piggy.$(suffix_y) FORCE
diff --git a/arch/mips/pbl/piggy.gzip.S b/arch/mips/pbl/piggy.gzip.S
new file mode 100644
index 0000000..1e6bbef
--- /dev/null
+++ b/arch/mips/pbl/piggy.gzip.S
@@ -0,0 +1,6 @@
+#include <asm/asm.h>
+
+ .section .data
+EXPORT(input_data)
+ .incbin "arch/mips/pbl/piggy.gzip"
+EXPORT(input_data_end)
diff --git a/arch/mips/pbl/piggy.lzo.S b/arch/mips/pbl/piggy.lzo.S
new file mode 100644
index 0000000..6f1af1f
--- /dev/null
+++ b/arch/mips/pbl/piggy.lzo.S
@@ -0,0 +1,6 @@
+#include <asm/asm.h>
+
+ .section .data
+EXPORT(input_data)
+ .incbin "arch/mips/pbl/piggy.lzo"
+EXPORT(input_data_end)
diff --git a/arch/mips/pbl/zbarebox.lds.S b/arch/mips/pbl/zbarebox.lds.S
new file mode 100644
index 0000000..3a26942
--- /dev/null
+++ b/arch/mips/pbl/zbarebox.lds.S
@@ -0,0 +1,57 @@
+/*
+ * (C) Copyright 2012 Sascha Hauer <s.hauer at pengutronix.de>, Pengutronix
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <asm-generic/barebox.lds.h>
+#include <asm-generic/memory_layout.h>
+
+OUTPUT_ARCH("mips")
+ENTRY(pbl_start)
+SECTIONS
+{
+ . = HEAD_TEXT_BASE;
+
+ PRE_IMAGE
+
+ . = ALIGN(4);
+ .text :
+ {
+ _stext = .;
+ _text = .;
+ *(.text_head_entry*)
+ __bare_init_start = .;
+ *(.text_bare_init*)
+ __bare_init_end = .;
+ *(.text*)
+ }
+
+ BAREBOX_BARE_INIT_SIZE
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata*) }
+
+ _etext = .; /* End of text and rodata section */
+
+ . = ALIGN(4);
+ .data : { *(.data*) }
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss*) }
+ __bss_stop = .;
+ _end = .;
+}
--
1.7.10.4
More information about the barebox
mailing list