[PATCH 1/2] arm: at91: add at91sam9n12 support
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Fri Nov 23 11:01:34 EST 2012
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
arch/arm/mach-at91/Kconfig | 6 +
arch/arm/mach-at91/Makefile | 1 +
arch/arm/mach-at91/at91sam9n12.c | 233 ++++++++++++
arch/arm/mach-at91/at91sam9n12_devices.c | 374 ++++++++++++++++++++
arch/arm/mach-at91/clock.c | 15 +-
arch/arm/mach-at91/gpio.c | 2 +-
arch/arm/mach-at91/include/mach/at91sam9n12.h | 166 +++++++++
.../mach-at91/include/mach/at91sam9n12_matrix.h | 98 +++++
arch/arm/mach-at91/include/mach/board.h | 1 +
arch/arm/mach-at91/include/mach/cpu.h | 7 +
arch/arm/mach-at91/include/mach/hardware.h | 2 +
11 files changed, 899 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/mach-at91/at91sam9n12.c
create mode 100644 arch/arm/mach-at91/at91sam9n12_devices.c
create mode 100644 arch/arm/mach-at91/include/mach/at91sam9n12.h
create mode 100644 arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 3a985f7..e7e1c84 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -92,6 +92,11 @@ config ARCH_AT91SAM9X5
select HAS_MACB
select AT91SAM9G45_RESET
+config ARCH_AT91SAM9N12
+ bool "AT91SAM9N12"
+ select CPU_ARM926T
+ select AT91SAM9G45_RESET
+
endchoice
config ARCH_BAREBOX_MAX_BARE_INIT_SIZE
@@ -103,6 +108,7 @@ config ARCH_BAREBOX_MAX_BARE_INIT_SIZE
default 0x3000 if ARCH_AT91SAM9G10
default 0xF000 if ARCH_AT91SAM9G45
default 0x6000 if ARCH_AT91SAM9X5
+ default 0x6000 if ARCH_AT91SAM9N12
default 0xffffffff
config SUPPORT_CALAO_DAB_MMX
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 3ade725..7a1e506 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -18,3 +18,4 @@ obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_d
obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9X5) += at91sam9x5.o at91sam926x_time.o at91sam9x5_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9N12) += at91sam9n12.o at91sam926x_time.o at91sam9n12_devices.o sam9_smc.o
diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
new file mode 100644
index 0000000..b74a72a
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9n12.c
@@ -0,0 +1,233 @@
+#include <common.h>
+#include <gpio.h>
+#include <init.h>
+#include <asm/hardware.h>
+#include <mach/at91_pmc.h>
+#include <mach/io.h>
+#include <mach/cpu.h>
+
+#include "generic.h"
+#include "clock.h"
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioAB_clk = {
+ .name = "pioAB_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_PIOAB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioCD_clk = {
+ .name = "pioCD_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_PIOCD,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_USART0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_USART1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_USART2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart3_clk = {
+ .name = "usart3_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_USART3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi0_clk = {
+ .name = "twi0_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_TWI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi1_clk = {
+ .name = "twi1_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_TWI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+ .name = "mci_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_MCI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+ .name = "spi0_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_SPI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+ .name = "spi1_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk uart0_clk = {
+ .name = "uart0_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_UART0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk uart1_clk = {
+ .name = "uart1_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_UART1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb0_clk = {
+ .name = "tcb0_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_TCB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pwm_clk = {
+ .name = "pwm_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_PWM,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk adc_clk = {
+ .name = "adc_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_ADC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma_clk = {
+ .name = "dma_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_DMA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk uhpfs_clk = {
+ .name = "uhpfs_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_UHPFS,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+ .name = "udc_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_UDPFS,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+ .name = "lcdc_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_LCDC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc_clk = {
+ .name = "ssc_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_SSC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioAB_clk,
+ &pioCD_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &usart3_clk,
+ &twi0_clk,
+ &twi1_clk,
+ &mmc_clk,
+ &spi0_clk,
+ &spi1_clk,
+ &uart0_clk,
+ &uart1_clk,
+ &tcb0_clk,
+ &pwm_clk,
+ &adc_clk,
+ &dma_clk,
+ &lcdc_clk,
+ &uhpfs_clk,
+ &udc_clk,
+ &ssc_clk,
+};
+
+static struct clk_lookup periph_clocks_lookups[] = {
+ CLKDEV_CON_ID("ohci_clk", &uhpfs_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi0", &spi0_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi1", &spi1_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart0", &mck),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart1", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart2", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart3", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart4", &usart3_clk),
+};
+
+/*
+ * The two programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+
+static void __init at91sam9n12_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+
+ clkdev_add_table(periph_clocks_lookups,
+ ARRAY_SIZE(periph_clocks_lookups));
+ clkdev_add_table(usart_clocks_lookups,
+ ARRAY_SIZE(usart_clocks_lookups));
+
+}
+
+/* --------------------------------------------------------------------
+ * GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9n12_gpio[] = {
+ {
+ .regbase = IOMEM(AT91_BASE_PIOA),
+ .clock = &pioAB_clk,
+ }, {
+ .regbase = IOMEM(AT91_BASE_PIOB),
+ .clock = &pioAB_clk,
+ }, {
+ .regbase = IOMEM(AT91_BASE_PIOC),
+ .clock = &pioCD_clk,
+ }, {
+ .regbase = IOMEM(AT91_BASE_PIOD),
+ .clock = &pioCD_clk,
+ }
+};
+
+/* --------------------------------------------------------------------
+ * AT91SAM9N12 processor initialization
+ * -------------------------------------------------------------------- */
+
+static int at91sam9n12_initialize(void)
+{
+ /* Init clock subsystem */
+ at91_clock_init(AT91_MAIN_CLOCK);
+
+ /* Register the processor-specific clocks */
+ at91sam9n12_register_clocks();
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at91sam9n12_gpio, 4);
+ return 0;
+}
+core_initcall(at91sam9n12_initialize);
diff --git a/arch/arm/mach-at91/at91sam9n12_devices.c b/arch/arm/mach-at91/at91sam9n12_devices.c
new file mode 100644
index 0000000..33baf41
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9n12_devices.c
@@ -0,0 +1,374 @@
+/*
+ * On-Chip devices setup code for the AT91SAM9x5 family
+ *
+ * Copyright (C) 2010 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <common.h>
+#include <init.h>
+#include <sizes.h>
+#include <asm/armlinux.h>
+#include <asm/hardware.h>
+#include <mach/board.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91sam9n12_matrix.h>
+#include <mach/gpio.h>
+#include <mach/io.h>
+#include <mach/cpu.h>
+#include <i2c/i2c-gpio.h>
+
+#include "generic.h"
+
+void at91_add_device_sdram(u32 size)
+{
+ arm_add_mem_device("ram0", AT91_CHIPSELECT_1, size);
+ add_mem_device("sram0", AT91SAM9N12_SRAM_BASE,
+ AT91SAM9N12_SRAM_SIZE, IORESOURCE_MEM_WRITEABLE);
+}
+
+/* --------------------------------------------------------------------
+ * USB Host (OHCI)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI)
+void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
+{
+ int i;
+
+ if (!data)
+ return;
+
+ /* Enable VBus control for UHP ports */
+ for (i = 0; i < data->ports; i++) {
+ if (data->vbus_pin[i])
+ at91_set_gpio_output(data->vbus_pin[i], 0);
+ }
+
+ add_generic_device("at91_ohci", DEVICE_ID_DYNAMIC, NULL, AT91SAM9N12_OHCI_BASE,
+ SZ_1M, IORESOURCE_MEM, data);
+}
+#else
+void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
+#endif
+
+/* --------------------------------------------------------------------
+ * USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_DRIVER_AT91
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+ if (data->vbus_pin > 0) {
+ at91_set_gpio_input(data->vbus_pin, 0);
+ at91_set_deglitch(data->vbus_pin, 1);
+ }
+
+ add_generic_device("at91_udc", DEVICE_ID_SINGLE, NULL, AT91SAM9N12_BASE_UDPFS,
+ SZ_16K, IORESOURCE_MEM, data);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+#if defined(CONFIG_MCI_ATMEL)
+/* Consider only one slot : slot 0 */
+void __init at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
+{
+ if (!data)
+ return;
+
+ /* Must have at least one usable slot */
+ if (!data->bus_width)
+ return;
+
+ /* input/irq */
+ if (data->detect_pin) {
+ at91_set_gpio_input(data->detect_pin, 1);
+ at91_set_deglitch(data->detect_pin, 1);
+ }
+ if (data->wp_pin)
+ at91_set_gpio_input(data->wp_pin, 1);
+
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA17, 0);
+
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA16, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA15, 1);
+ if (data->bus_width == 4) {
+ at91_set_A_periph(AT91_PIN_PA18, 1);
+ at91_set_A_periph(AT91_PIN_PA19, 1);
+ at91_set_A_periph(AT91_PIN_PA20, 1);
+ }
+
+ add_generic_device("atmel_mci", DEVICE_ID_SINGLE, NULL, AT91SAM9N12_BASE_MCI, SZ_16K,
+ IORESOURCE_MEM, data);
+}
+#else
+void __init at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data) {}
+#endif
+
+/* --------------------------------------------------------------------
+ * NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_NAND_ATMEL)
+static struct resource nand_resources[] = {
+ [0] = {
+ .start = AT91_CHIPSELECT_3,
+ .end = AT91_CHIPSELECT_3 + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_BASE_SYS + AT91_PMECC,
+ .end = AT91_BASE_SYS + AT91_PMECC + 0x600 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = AT91_BASE_SYS + AT91_PMERRLOC,
+ .end = AT91_BASE_SYS + AT91_PMERRLOC + 0x200 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [3] = {
+ .start = AT91SAM9N12_ROM_BASE,
+ .end = AT91SAM9N12_ROM_BASE + AT91SAM9N12_ROM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+void __init at91_add_device_nand(struct atmel_nand_data *data)
+{
+ unsigned long csa;
+
+ if (!data)
+ return;
+
+ data->pmecc_lookup_table_offset = 0x8000;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+
+ /* Assign CS3 to NAND/SmartMedia Interface */
+ csa |= AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH;
+ /* Configure databus */
+ if (!data->bus_on_d0)
+ csa |= AT91_MATRIX_NFD0_ON_D16;
+ else
+ csa &= ~AT91_MATRIX_NFD0_ON_D16;
+ /* Configure IO drive */
+ csa |= AT91_MATRIX_EBI_HIGH_DRIVE;
+
+ at91_sys_write(AT91_MATRIX_EBICSA, csa);
+
+ /* enable pin */
+ if (data->enable_pin)
+ at91_set_gpio_output(data->enable_pin, 1);
+
+ /* ready/busy pin */
+ if (data->rdy_pin)
+ at91_set_gpio_input(data->rdy_pin, 1);
+
+ /* card detect pin */
+ if (data->det_pin)
+ at91_set_gpio_input(data->det_pin, 1);
+
+ /* configure NANDOE */
+ at91_set_A_periph(AT91_PIN_PD0, 1);
+ /* configure NANDWE */
+ at91_set_A_periph(AT91_PIN_PD1, 1);
+ /* configure ALE */
+ at91_set_A_periph(AT91_PIN_PD2, 1);
+ /* configure CLE */
+ at91_set_A_periph(AT91_PIN_PD3, 1);
+
+ /* configure multiplexed pins for D16~D31 */
+ if (!data->bus_on_d0) {
+ at91_set_A_periph(AT91_PIN_PD6, 1);
+ at91_set_A_periph(AT91_PIN_PD7, 1);
+ at91_set_A_periph(AT91_PIN_PD8, 1);
+ at91_set_A_periph(AT91_PIN_PD9, 1);
+ at91_set_A_periph(AT91_PIN_PD10, 1);
+ at91_set_A_periph(AT91_PIN_PD11, 1);
+ at91_set_A_periph(AT91_PIN_PD12, 1);
+ at91_set_A_periph(AT91_PIN_PD13, 1);
+
+ if (data->bus_width_16) {
+ at91_set_A_periph(AT91_PIN_PD14, 1);
+ at91_set_A_periph(AT91_PIN_PD15, 1);
+ at91_set_A_periph(AT91_PIN_PD16, 1);
+ at91_set_A_periph(AT91_PIN_PD17, 1);
+ at91_set_A_periph(AT91_PIN_PD18, 1);
+ at91_set_A_periph(AT91_PIN_PD19, 1);
+ at91_set_A_periph(AT91_PIN_PD20, 1);
+ at91_set_A_periph(AT91_PIN_PD21, 1);
+ }
+
+ }
+
+ add_generic_device_res("atmel_nand", DEVICE_ID_SINGLE, nand_resources,
+ ARRAY_SIZE(nand_resources), data);
+}
+#else
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
+#endif
+
+#if defined(CONFIG_I2C_GPIO)
+static struct i2c_gpio_platform_data pdata_i2c0 = {
+ .sda_pin = AT91_PIN_PA30,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PA31,
+ .scl_is_open_drain = 1,
+ .udelay = 5, /* ~100 kHz */
+};
+
+void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+{
+ struct i2c_gpio_platform_data *pdata = &pdata_i2c0;
+
+ i2c_register_board_info(0, devices, nr_devices);
+
+ at91_set_GPIO_periph(pdata->sda_pin, 1); /* TWD (SDA) */
+ at91_set_multi_drive(pdata->sda_pin, 1);
+
+ at91_set_GPIO_periph(pdata->scl_pin, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(pdata->scl_pin, 1);
+
+ add_generic_device_res("i2c-gpio", 0, NULL, 0, pdata);
+}
+#else
+void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
+/* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_DRIVER_SPI_ATMEL)
+static unsigned spi0_standard_cs[4] = { AT91_PIN_PA14, AT91_PIN_PA7, AT91_PIN_PA1, AT91_PIN_PB3 };
+
+static unsigned spi1_standard_cs[4] = { AT91_PIN_PA8, AT91_PIN_PA0, AT91_PIN_PA31, AT91_PIN_PA30 };
+
+static struct at91_spi_platform_data spi_pdata[] = {
+ [0] = {
+ .chipselect = spi0_standard_cs,
+ .num_chipselect = ARRAY_SIZE(spi0_standard_cs),
+ },
+ [1] = {
+ .chipselect = spi1_standard_cs,
+ .num_chipselect = ARRAY_SIZE(spi1_standard_cs),
+ },
+};
+
+void at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata)
+{
+ int i;
+ int cs_pin;
+ resource_size_t start = ~0;
+
+ BUG_ON(spi_id > 1);
+
+ if (!pdata)
+ pdata = &spi_pdata[spi_id];
+
+ for (i = 0; i < pdata->num_chipselect; i++) {
+ cs_pin = pdata->chipselect[i];
+
+ /* enable chip-select pin */
+ if (gpio_is_valid(cs_pin))
+ at91_set_gpio_output(cs_pin, 1);
+ }
+
+ /* Configure SPI bus(es) */
+ switch (spi_id) {
+ case 0:
+ start = AT91SAM9N12_BASE_SPI0;
+ at91_set_A_periph(AT91_PIN_PA11, 0); /* SPI0_MISO */
+ at91_set_A_periph(AT91_PIN_PA12, 0); /* SPI0_MOSI */
+ at91_set_A_periph(AT91_PIN_PA13, 0); /* SPI0_SPCK */
+ break;
+ case 1:
+ start = AT91SAM9N12_BASE_SPI1;
+ at91_set_B_periph(AT91_PIN_PA21, 0); /* SPI1_MISO */
+ at91_set_B_periph(AT91_PIN_PA22, 0); /* SPI1_MOSI */
+ at91_set_B_periph(AT91_PIN_PA23, 0); /* SPI1_SPCK */
+ break;
+ }
+
+ add_generic_device("atmel_spi", spi_id, NULL, start, SZ_16K,
+ IORESOURCE_MEM, pdata);
+}
+#else
+void at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata) {}
+#endif
+
+/* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_DRIVER_SERIAL_ATMEL)
+resource_size_t __init at91_configure_dbgu(void)
+{
+ at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */
+
+ return AT91_BASE_SYS + AT91_DBGU;
+}
+
+resource_size_t __init at91_configure_usart0(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PA0, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA1, 0); /* RXD0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PA2, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA3, 0); /* CTS0 */
+
+ return AT91SAM9N12_BASE_USART0;
+}
+
+resource_size_t __init at91_configure_usart1(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PA5, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PA6, 0); /* RXD1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_C_periph(AT91_PIN_PC27, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_C_periph(AT91_PIN_PC28, 0); /* CTS1 */
+
+ return AT91SAM9N12_BASE_USART1;
+}
+
+resource_size_t __init at91_configure_usart2(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PA7, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PA8, 0); /* RXD2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS2 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS2 */
+
+ return AT91SAM9N12_BASE_USART2;
+}
+
+resource_size_t __init at91_configure_usart3(unsigned pins)
+{
+ at91_set_B_periph(AT91_PIN_PC22, 1); /* TXD3 */
+ at91_set_B_periph(AT91_PIN_PC23, 0); /* RXD3 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* RTS3 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* CTS3 */
+
+ return AT91SAM9N12_BASE_USART3;
+}
+#endif
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index fd9ba46..e911270 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -46,7 +46,8 @@
#define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \
|| cpu_is_at91sam9g45() \
- || cpu_is_at91sam9x5())
+ || cpu_is_at91sam9x5() \
+ || cpu_is_at91sam9n12())
#define cpu_has_300M_plla() (cpu_is_at91sam9g10())
@@ -58,7 +59,8 @@
#define cpu_has_pllb() (!(cpu_is_at91sam9rl() \
|| cpu_is_at91sam9g45() \
- || cpu_is_at91sam9x5()))
+ || cpu_is_at91sam9x5() \
+ || cpu_is_at91sam9n12()))
#define cpu_has_upll() (cpu_is_at91sam9g45() \
|| cpu_is_at91sam9x5())
@@ -72,12 +74,15 @@
|| cpu_is_at91sam9x5()))
#define cpu_has_plladiv2() (cpu_is_at91sam9g45() \
- || cpu_is_at91sam9x5())
+ || cpu_is_at91sam9x5() \
+ || cpu_is_at91sam9n12())
#define cpu_has_mdiv3() (cpu_is_at91sam9g45() \
- || cpu_is_at91sam9x5())
+ || cpu_is_at91sam9x5() \
+ || cpu_is_at91sam9n12())
-#define cpu_has_alt_prescaler() (cpu_is_at91sam9x5())
+#define cpu_has_alt_prescaler() (cpu_is_at91sam9x5() \
+ || cpu_is_at91sam9n12())
static LIST_HEAD(clocks);
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index c303326..c35f00e 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -364,7 +364,7 @@ int at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
clk_enable(data->clock);
}
- cpu_has_pio3 = cpu_is_at91sam9x5();
+ cpu_has_pio3 = cpu_is_at91sam9x5() || cpu_is_at91sam9n12();
return 0;
}
diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12.h b/arch/arm/mach-at91/include/mach/at91sam9n12.h
new file mode 100644
index 0000000..dcbdb1b
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9n12.h
@@ -0,0 +1,166 @@
+/*
+ * Chip-specific header file for the AT91SAM9N12 SoC
+ *
+ * Copyright (C) 2011 Atmel Corporation
+ *
+ * Common definitions.
+ * Based on AT91SAM9N12 preliminary datasheet
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __MACH_AT91SAM9N12_H_
+#define __MACH_AT91SAM9N12_H_
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Controller Interrupt */
+#define AT91SAM9N12_ID_PIOAB 2 /* Parallel I/O Controller A and B */
+#define AT91SAM9N12_ID_PIOCD 3 /* Parallel I/O Controller C and D */
+/* Reserved 4 */
+#define AT91SAM9N12_ID_USART0 5 /* USART 0 */
+#define AT91SAM9N12_ID_USART1 6 /* USART 1 */
+#define AT91SAM9N12_ID_USART2 7 /* USART 2 */
+#define AT91SAM9N12_ID_USART3 8 /* USART 3 */
+#define AT91SAM9N12_ID_TWI0 9 /* Two-Wire Interface 0 */
+#define AT91SAM9N12_ID_TWI1 10 /* Two-Wire Interface 1 */
+/* Reserved 11 */
+#define AT91SAM9N12_ID_MCI 12 /* High Speed Multimedia Card Interface 0 */
+#define AT91SAM9N12_ID_SPI0 13 /* Serial Peripheral Interface 0 */
+#define AT91SAM9N12_ID_SPI1 14 /* Serial Peripheral Interface 1 */
+#define AT91SAM9N12_ID_UART0 15 /* UART 0 */
+#define AT91SAM9N12_ID_UART1 16 /* UART 1 */
+#define AT91SAM9N12_ID_TCB 17 /* Timer Counter 0, 1, 2, 3, 4 and 5 */
+#define AT91SAM9N12_ID_PWM 18 /* Pulse Width Modulation Controller */
+#define AT91SAM9N12_ID_ADC 19 /* ADC Controller */
+#define AT91SAM9N12_ID_DMA 20 /* DMA Controller 0 */
+/* Reserved 21 */
+#define AT91SAM9N12_ID_UHPFS 22 /* USB Host Full Speed */
+#define AT91SAM9N12_ID_UDPFS 23 /* USB Device Full Speed */
+/* Reserved 24 */
+#define AT91SAM9N12_ID_LCDC 25 /* LCD Controller */
+/* Reserved 26 */
+/* Reserved 27 */
+#define AT91SAM9N12_ID_SSC 28 /* Synchronous Serial Controller */
+/* Reserved 29 */
+#define AT91SAM9N12_ID_TRNG 30 /* True Random Number Generator */
+#define AT91SAM9N12_ID_IRQ0 31 /* Advanced Interrupt Controller */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9N12_BASE_SPI0 0xf0000000
+#define AT91SAM9N12_BASE_SPI1 0xf0004000
+#define AT91SAM9N12_BASE_MCI 0xf0008000
+#define AT91SAM9N12_BASE_SSC 0xf0010000
+#define AT91SAM9N12_BASE_TCB0 0xf8008000
+#define AT91SAM9N12_BASE_TC0 0xf8008000
+#define AT91SAM9N12_BASE_TC1 0xf8008040
+#define AT91SAM9N12_BASE_TC2 0xf8008080
+#define AT91SAM9N12_BASE_TCB1 0xf800c000
+#define AT91SAM9N12_BASE_TC3 0xf800c000
+#define AT91SAM9N12_BASE_TC4 0xf800c040
+#define AT91SAM9N12_BASE_TC5 0xf800c080
+#define AT91SAM9N12_BASE_TWI0 0xf8010000
+#define AT91SAM9N12_BASE_TWI1 0xf8014000
+#define AT91SAM9N12_BASE_USART0 0xf801c000
+#define AT91SAM9N12_BASE_USART1 0xf8020000
+#define AT91SAM9N12_BASE_USART2 0xf8024000
+#define AT91SAM9N12_BASE_USART3 0xf8028000
+#define AT91SAM9N12_BASE_PWMC 0xf8034000
+#define AT91SAM9N12_BASE_LCDC 0xf8038000
+#define AT91SAM9N12_BASE_UDPFS 0xf803c000
+#define AT91SAM9N12_BASE_UART0 0xf8040000
+#define AT91SAM9N12_BASE_UART1 0xf8044000
+#define AT91SAM9N12_BASE_TRNG 0xf8048000
+#define AT91SAM9N12_BASE_ADC 0xf804c000
+#define AT91_BASE_SYS 0xffffc000
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_FUSE (0xffffdc00 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffde00 - AT91_BASE_SYS)
+#define AT91_PMECC (0xffffe000 - AT91_BASE_SYS)
+#define AT91_PMERRLOC (0xffffe600 - AT91_BASE_SYS)
+#define AT91_DDRSDRC0 (0xffffe800 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_DMA (0xffffec00 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffe00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffe10 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffe30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffe40 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffe60 - AT91_BASE_SYS)
+#define AT91_RTC (0xfffffeb0 - AT91_BASE_SYS)
+
+#define AT91_BASE_PIOA 0xfffff400
+#define AT91_BASE_PIOB 0xfffff600
+#define AT91_BASE_PIOC 0xfffff800
+#define AT91_BASE_PIOD 0xfffffa00
+
+#define AT91_USART0 AT91SAM9X5_BASE_US0
+#define AT91_USART1 AT91SAM9X5_BASE_US1
+#define AT91_USART2 AT91SAM9X5_BASE_US2
+#define AT91_USART3 AT91SAM9X5_BASE_US3
+#define AT91_NB_USART 5
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9N12_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define AT91SAM9N12_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */
+
+#define AT91SAM9N12_ROM_BASE 0x00100000 /* Internal ROM base address */
+#define AT91SAM9N12_ROM_SIZE SZ_1M /* Internal ROM size (1Mb) */
+
+#define AT91SAM9N12_SMD_BASE 0x00400000 /* SMD Controller */
+#define AT91SAM9N12_OHCI_BASE 0x00500000 /* USB Host controller (OHCI) */
+
+#define CONFIG_DRAM_BASE AT91_CHIPSELECT_1
+
+#define CONSISTENT_DMA_SIZE (14 * SZ_1M)
+
+/*
+ * DMA0 peripheral identifiers
+ * for hardware handshaking interface
+ */
+#define AT_DMA_ID_MCI 0
+#define AT_DMA_ID_SPI0_TX 1
+#define AT_DMA_ID_SPI0_RX 2
+#define AT_DMA_ID_SPI1_TX 3
+#define AT_DMA_ID_SPI1_RX 4
+#define AT_DMA_ID_USART0_TX 5
+#define AT_DMA_ID_USART0_RX 6
+#define AT_DMA_ID_USART1_TX 7
+#define AT_DMA_ID_USART1_RX 8
+#define AT_DMA_ID_USART2_TX 9
+#define AT_DMA_ID_USART2_RX 10
+#define AT_DMA_ID_USART3_TX 11
+#define AT_DMA_ID_USART3_RX 12
+#define AT_DMA_ID_TWI0_TX 13
+#define AT_DMA_ID_TWI0_RX 14
+#define AT_DMA_ID_TWI1_TX 15
+#define AT_DMA_ID_TWI1_RX 16
+#define AT_DMA_ID_UART0_TX 17
+#define AT_DMA_ID_UART0_RX 18
+#define AT_DMA_ID_UART1_TX 19
+#define AT_DMA_ID_UART1_RX 20
+#define AT_DMA_ID_SSC_TX 21
+#define AT_DMA_ID_SSC_RX 22
+#define AT_DMA_ID_ADC_RX 23
+#define AT_DMA_ID_DBGU_TX 24
+#define AT_DMA_ID_DBGU_RX 25
+#define AT_DMA_ID_AES_TX 26
+#define AT_DMA_ID_AES_RX 27
+#define AT_DMA_ID_SHA_RX 28
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h
new file mode 100644
index 0000000..0e42918
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h
@@ -0,0 +1,98 @@
+/*
+ * Matrix-Centric header file for the AT91SAM9N12 SoC
+ *
+ * Copyright (C) 2011 Atmel Corporation
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9N12 preliminary datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _AT91SAM9N12_MATRIX_H_
+#define _AT91SAM9N12_MATRIX_H_
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0)
+#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0)
+#define AT91_MATRIX_ULBT_128 (7 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SLOT_CYCLE (0x1ff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB2 (1 << 2)
+#define AT91_MATRIX_RCB3 (1 << 3)
+#define AT91_MATRIX_RCB4 (1 << 4)
+#define AT91_MATRIX_RCB5 (1 << 5)
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x118) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3)
+#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
+#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
+#define AT91_MATRIX_EBI_DBPDC (1 << 9) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI_DBPD_ON (0 << 9)
+#define AT91_MATRIX_EBI_DBPD_OFF (1 << 9)
+#define AT91_MATRIX_EBI_DRIVE (1 << 17) /* EBI I/O Drive Configuration */
+#define AT91_MATRIX_EBI_LOW_DRIVE (0 << 17)
+#define AT91_MATRIX_EBI_HIGH_DRIVE (1 << 17)
+#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */
+#define AT91_MATRIX_NFD0_ON_D0 (0 << 24)
+#define AT91_MATRIX_NFD0_ON_D16 (1 << 24)
+
+#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */
+#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */
+#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
+#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
+#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */
+
+#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */
+#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */
+#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
+#define AT91_MATRIX_WPSR_WPV (1 << 0)
+#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index dcea9f3..98c69f9 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -54,6 +54,7 @@ struct atmel_nand_data {
u8 bus_width_16; /* buswidth is 16 bit */
u8 ecc_mode; /* NAND_ECC_* */
u8 on_flash_bbt; /* Use flash based bbt */
+ u8 bus_on_d0;
u8 pmecc_corr_cap;
u16 pmecc_sector_size;
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index 0700f21..90b9f8a 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -28,6 +28,7 @@
#define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */
#define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */
#define ARCH_ID_AT91SAM9X5 0x819a05a0
+#define ARCH_ID_AT91SAM9N12 0x819a07a0
#define ARCH_ID_AT91CAP9 0x039A03A0
#define ARCH_ID_AT91SAM9XE128 0x329973a0
@@ -171,6 +172,12 @@ static inline unsigned long at91cap9_rev_identify(void)
#define cpu_is_at91sam9x25() (0)
#endif
+#ifdef CONFIG_ARCH_AT91SAM9N12
+#define cpu_is_at91sam9n12() (at91_cpu_identify() == ARCH_ID_AT91SAM9N12)
+#else
+#define cpu_is_at91sam9n12() (0)
+#endif
+
#ifdef CONFIG_ARCH_AT91CAP9
#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9)
#define cpu_is_at91cap9_revB() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index 7af8803..f8ac791 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -26,6 +26,8 @@
#include <mach/at91sam9rl.h>
#elif defined(CONFIG_ARCH_AT91SAM9G45)
#include <mach/at91sam9g45.h>
+#elif defined(CONFIG_ARCH_AT91SAM9N12)
+#include <mach/at91sam9n12.h>
#elif defined(CONFIG_ARCH_AT91SAM9X5)
#include <mach/at91sam9x5.h>
#elif defined(CONFIG_ARCH_AT91CAP9)
--
1.7.10.4
More information about the barebox
mailing list